BARCODE SOFTWARE BARTENDER EXCEPTION QUESTIONS ANSWERED.

Bartender barcode printing software becomes unresponsive as soon as it is opened, which is caused by a setting error, and the solution is as follows:

1. First, open the Bartender barcode printing software and create a new label.

2. Select a barcode under the icon of the barcode shape, select code128 code here, and then put it in the blank space.

3. Right-click the barcode attribute or double-click the barcode, in the property dialog box, the content in the data source is the content of the barcode.

4. If you want to make the content in the barcode unrealistic, just set the visibility in readability to "none".

5. Set the prefix or suffix of the barcode, under the conversion tab behind the data source item.

6. Finally, set the prefix or suffix respectively, and click OK.

Do your three computers share a barcode printer to print, if so, then you are driving the default printer driven by the barcode printer to remove, otherwise the system will go to the LAN to keep looking for the printer, open it slowly.

Barcode printer technical support.

In Bartender 2016 when designing barcode labels, some partners printed out barcodes that were not very complete, and the icon text was broken, resulting in barcodes that could not be scanned. At first, I wondered if it would be because the barcode line was too dense because it couldn't be scanned, and then I asked if it was a problem with the density or thickness of the barcode line, and it would not be intermittent. In fact, this has nothing to do with Bartender 2016 barcode software and printers, but with Bartender software print settings.

Next, I will talk about the specific solution for you.

1. Open the designed barcode label in Bartender 2016, click "Manage" in the menu bar, and click "Advanced Printer and Drive Settings (V)" in the pop-up drop-down list to open the "Advanced Printer and Drive Settings" dialog box.

<>2. On the left side of the "Advanced Printer and Drive Settings" dialog box, select the corresponding printer, and in the corresponding printer settings on the right, check "Override Default Settings", the printing technology is "Inkjet" by default, select "Hot" to change it, and click OK.

Note: Here Bartender software printing settings are closely related to your printers, if you are using a thermal printer, you can set it according to the above methods, if not, please modify the "printing technology" according to your printer type.

Pay attention to the length, try to scan the code first.