Butanone testing standards, butanone content standards

Updated on healthy 2024-08-10
8 answers
  1. Anonymous users2024-02-15

    METANONE test :

    One: MEK. Butanone is methyl ethyl ketone.

    Colorless transparent liquid. It has an acetone-like odor. Volatile.

    It can be miscible with ethanol, ether, benzene, chloroform and oil. Soluble in 4 parts water, but solubility decreases when the temperature increases. It can form an azeotropic mixture with water (containing water, azeotropic point containing butanone.

    Two: What are the properties of butanone.

    Melting point ( ) relative density (water = 1):

    Boiling point ( ) relative vapor density (air = 1):

    Saturation vapor pressure (kpa):

    Heat of combustion (kj mol):

    Critical temperature ( ) 260

    Critical Pressure (MPa):

    Octanol The logarithm of the water partition coefficient:

    Flash point ( )9

    **Upper Limit %(v v):

    Ignition temperature ( ) 404

    **Lower Limit %(v v):

    Solubility: soluble in water, ethanol, ether, miscible in oil.

    Three: the main detection items of butanone.

    Density, combustion value, critical temperature, critical pressure, flash point, saturation, molar refractive index, molar volume, isotonic specific volume, surface tension, polarization force, etc.

    Kebiao Energy Testing Center provides butanone testing, butanone content testing, butanone content determination and other related testing services to help solve a series of problems in butanone.

  2. Anonymous users2024-02-14

    There is no national standard for industrial butanone, but there is also a standard that can be referred to.

    The laboratory butanol really didn't find it, and you can ask the manufacturer.

  3. Anonymous users2024-02-13

    Hello, I am happy to serve you and give you the following answers: Butanone content standard: In general, the standard of butanone content is calculated according to percentages, generally 1-2%.

    Reasons for the problem:1It may be that the raw material contains too much butanone, resulting in excessive butanone content.

    2.It may be that the production process is not properly operated, resulting in excessive butanone content. Workaround and Procedure Steps:

    1.First of all, the amount of butanone in the raw material should be checked, and if it exceeds the standard, the raw material needs to be replaced. 2.

    Secondly, it is necessary to check whether the operation in the production process is correct, and if the family mining is incorrect, it needs to be re-operated. 3.Finally, check the butanone level regularly to ensure that the butanone level is within the standard range.

    Teaching & Personal Tips:1In the production process, Zhaokai should operate in strict accordance with the standard to ensure that the butanone content is within the standard range.

    2.Check the butanone level regularly to ensure that the butanone level is within the standard range. 3.

    If it is found that the butanone content exceeds the standard, it is necessary to take timely measures to ensure the quality of production. Related knowledge: MEK is an organic compound, a volatile bulk organic compound, with an aromatic odor, which can be used as a spice in food and as a preservative.

    Too high butanone content will cause harm to human health, therefore, in the production process, the butanone content should be strictly controlled to ensure the quality of production.

  4. Anonymous users2024-02-12

    Hello, it is a pleasure to serve you and give you the following answer: Now, the standard of butanone content means that in a certain substance, the content of butanone in the remaining ear shall not exceed a certain proportion. The methods and practices to solve this problem are as follows:

    Fierce destruction 1First of all, it is necessary to determine the standard of butanone content, and determine that in a certain substance, the content of butanone should not exceed a certain proportion. 2.

    Secondly, a suitable detection method, such as gas chromatography, is required to determine the amount of butanone in the substance. 3.Finally, according to the measurement results, the butanone content standard was compared to determine whether the standard was exceeded.

    Personal tip: When determining the amount of butanone, make sure that you use an accurate test method to ensure the accuracy of the results. At the same time, it is necessary to ensure the accuracy of the butanone content standard to ensure the reliability of the determination results.

  5. Anonymous users2024-02-11

    Hello, I am happy to serve you and give you the following answers: the butanone content standard refers to the content of butanone in a certain substance, and in general, the butanone content standard refers to the amount of butanone in a substance that exceeds a certain limit. Workaround:

    1.First of all, it is necessary to determine the butanone content standard, according to different substances, the butanone content standard is also different, so it is necessary to determine the butanone content standard according to the actual situation. 2.

    Secondly, it is necessary to adopt appropriate detection methods, according to different substances, using different detection methods, and concealing leakage to determine the content of butanone. 3.Finally, according to the test results, the butanone content should be analyzed, and if the butanone content exceeds the standard, corresponding measures should be taken to ensure that the butanone content meets the standard.

    Personal tips: When determining the standard of butanone content, it is necessary to determine a reasonable standard according to the actual situation and combining different substances; When detecting the butanone content, an appropriate detection method should be used to determine the butanone content; When analyzing the test results, it is necessary to take corresponding measures according to the butanone content standard to ensure that the butanone content meets the standard.

  6. Anonymous users2024-02-10

    Summary. The professional chemical name of butanone is methyl ethyl ketone, which belongs to the third class of precursor chemicals. Methyl ethyl ketone is an organic compound, which is a colorless transparent liquid with an acetone-like odor.

    Volatile. It can be miscible with ethanol, ether, benzene, chloroform and oil. Soluble in 4 parts of water, the solubility decreases when the temperature increases, and can form an azeotropic mixture with water.

    Low toxicity, half lethal dose (rat, oral) 3300mg kg. Flammable, vapor can form a ** mixture with air. High concentrations of steam are narcotic.

    The classification and marking of commonly used hazardous chemicals (GB13690-92) classifies butanone as a flammable liquid with a flash point in the first category.

    The normal use content is to buy the finished product directly.

    Can you tell us more about that?

    The professional chemical name of butanone is methyl ethyl ketone, which belongs to the third class of precursor chemicals. Methyl ethyl ketone is an organic compound, which is a colorless transparent liquid with an acetone-like odor. Volatile.

    It can be miscible with ethanol, ether, benzene, chloroform and oil. When the temperature rises, the solution of the dissolved pants decreases, and it can form an azeotropic mixture with water. Low toxicity, half lethal dose (rat, oral) 3300mg kg.

    Flammable, vapor can form a ** mixture with air. High concentrations of steam are narcotic. The classification and marking of commonly used hazardous chemicals (GB13690-92) classifies quezethanone as a flammable liquid with a flash point in the first category.

  7. Anonymous users2024-02-09

    Summary. The minimum purity requirement of the Chinese national standard for industrial grade butanol (n-butanol) is 99% (mass fraction), that is, the butanol content shall not be less than 99%. In addition, depending on the specific use and industry standards, there may also be further requirements for other indicators of butanol such as acid number, moisture, color, etc.

    If you need more detailed information about the standard, please refer to the Chinese National Standard "Industrial Butanol" (GB T 537-2019).

    The butanol content standard refers to the maximum or minimum allowable amount of butanol for a specific use or application scenario. Specific standards may vary by region, country, industry, and use. If you need to know a specific butanol content standard, please provide more background and contextual information.

    Fellow, I really didn't understand, I can be more specific.

    The minimum purity requirement of the Chinese national standard for industrial grade butanol (n-butanol) is 99% (mass fraction), that is, the butanol content shall not be less than 99%. In addition, depending on the specific use and the different industry standards, there may also be further requirements for other explosive flame resistance standards such as acid number, moisture, color, etc. If you need more detailed information about the standard, please refer to the Chinese National Standard "Industrial Butanol" (GB T 537-2019).

  8. Anonymous users2024-02-08

    Hello, it is a pleasure to serve you and give you the following answers: MEK content standard: In general, the standard of MEK content is in accordance with the requirements of the US Federal Regulations (FDA), that is, the amount of butanone per kilogram of food shall not exceed 1 mg.

    Reasons for the problem:1In food processing, excessive or low temperatures may lead to excessive levels of butanone in food.

    2.In food processing, due to improper handling, it may lead to excessive levels of butanone in food. 3.

    In food processing, excessive additives may be added to the food due to excessive levels of butanone. Workaround and practice steps:1

    First of all, during food processing, the temperature should be controlled to ensure that the temperature is within a reasonable range to prevent the MEK content from exceeding the standard. 2.Secondly, in the process of food processing, the operation should be carried out in strict accordance with the operating procedures to prevent the butanone content from exceeding the standard.

    3.Finally, the amount of additives used in food processing should be controlled to prevent the amount of butanone from exceeding the standard. Teaching & Personal Tips:

    1.In food processing, the temperature, operating procedures and the amount of additives used should be strictly controlled to ensure that the amount of butanone in the food meets this standard. 2.

    During the processing of food bridges, the amount of butanone in the food should be checked regularly to ensure that the amount of butanone in the food meets the standard. 3.During food processing, attention should be paid to the safety of food to ensure that the amount of butanone in the food meets the standard.

    Related knowledge: MEK is a toxic organic compound that can be produced through reactions in food processing or through the use of additives. MEK is harmful to the human body, therefore, the amount of MEK in food must be strictly controlled to ensure the safety of the food.

Related questions
5 answers2024-08-10

The first step is the collection of samples, due to the uneven distribution of the composition of solid materials, so different points should be selected for collection in a certain way. In order to ensure that the samples taken are representative. >>>More

7 answers2024-08-10

Here are some well-known brands recognized in the valve industry, which are widely recognized and have a high reputation. While rankings may vary depending on time and market conditions, the following brands are generally considered to be among the top brands in the valve industry: >>>More

9 answers2024-08-10

First of all, you don't know what to ask. Is it a test or an audit? >>>More

12 answers2024-08-10

Generally speaking, the maximum concentration of formaldehyde in indoor air can not exceed milligrams per cubic meter, and the flooring used for decoration is usually divided into class A and class B, the concentration of formaldehyde in class A composite flooring cannot exceed milligrams per 100 grams, and class B products need to be controlled at 9-40 milligrams per 100 grams.

17 answers2024-08-10

The charging standard is 900 yuan for benzene and toluene. >>>More