-
Pure gold jewelry will have a chemical reaction when it encounters mercury, white spots appear, and it can be restored to its original color as long as it is grilled under an alcohol lamp for a while when cleaning.
**Care of jewelry.
Gold jewelry is not very squeamish, but if it is not carefully maintained, it will also lose its original luster and charm. In general, here are a few things to watch out for:
1. The chemicals of detergent will change the color of gold, so you should take off your gold jewelry before doing cleaning work.
2. Avoid direct contact with highly volatile substances such as perfume and hairspray, otherwise it will easily cause gold jewelry to fade.
3. Take off the gold jewelry when swimming, so as not to produce chemical changes on the surface after touching the sea water or pool water.
4. Wrap it in flannel cloth and then put it in the jewelry box to avoid friction and damage.
5. **Relatively soft and easy to deform, so do not pull necklaces and other accessories to avoid deformation.
6. Pure gold jewelry will produce a chemical reaction when it encounters mercury, white spots appear, and it can be restored to its original color as long as it is grilled under the alcohol lamp for a while when cleaning.
7. After wearing, the gold jewelry is often tarnished due to stains and dust, at this time, as long as the gold jewelry is soaked in warm water in a neutral detergent and cleaned, and then taken out to wipe dry.
Gold jewelry cleaning methods are as follows:
1. To protect the luster of ** jewelry, you can apply a thin layer of nail polish on it.
2. If there is a black silver film on the surface, you can use 2 grams of salt, 7 grams of baking soda, 8 grams of bleaching powder, and 60 ml of water to prepare it"Gold cleaner"Put the gold jewelry in a bowl, pour in the cleaning agent, after 2 hours, take out the gold jewelry, rinse it with clean water (preferably not hard water), and then wipe it with a soft cloth.
3. Roll a piece of cotton with a popsicle or matchstick for a gem-set ring, wet it in a mixture of flower water and glycerin, scrub the frame of the gemstone, and then polish the ring with a flannel cloth. Do not scrape with sharp objects such as razors.
4. Salt and vinegar are mixed into a cleaning agent, and it is used to wipe pure gold jewelry, which can make it last forever.
-
**Mercury removal tricks:
Prepare materials: cloth, flamethrower.
1. Wipe with a cloth**.
2. Use a flamethrower to heat lightly to restore the original color.
**Solutions and precautions for bracelets stained with mercury:
**After the bracelet is stained with mercury, it will cause **fading, and when the mercury comes into contact with**jewelry, the mercury will quickly react with **, causing the color of ** to look obvious white.
The best way is to heat it with fire, go to the maintenance department of the local gold shop, and use a flamethrower to heat it lightly to restore the original color. After the mercury encounters **, it will attach to the ** and form white, and people who don't know the truth think they have bought a fake**. Mercury will volatilize when heated, so it will soon return to its original color, so you don't have to worry.
When wearing gold and silver jewelry, avoid contact with hard objects and pull hard. Due to the low hardness of gold and silver, it is easy to be scratched or pulled off in contact with hard objects, which will destroy the decorative properties of jewelry. Avoid contact with other chemicals. Try to wear jewelry in places with chemical contamination as much as possible.
-
Hello, silver jewelry will turn black if it has mercury, you can try the following methods. 1.Use toothpaste and a toothbrush to scrub the blackened silver jewelry, and when the silver jewelry is back to its original shape, rinse it off with water.
2. Put the blackened silver jewelry in Coca-Cola for a long time, and when the silver jewelry returns to its original state, rinse it with water. 3. Put the blackened silver jewelry in the overnight strong tea for a long time, and when the silver jewelry returns to its original state, rinse it with water. 4. Use our usual edible acetic acid to clean the blackened silver jewelry, and when the silver jewelry returns to its original state, rinse it with water.
Hope it helps.
-
Summary. Hello Kiss I'm happy to answer this question for you,**Mercury removal tips 1Bake the surface of ** with an alcohol lamp, and then wipe the surface of ** with a towel2
Bake the surface of ** with a flamethrower and then polish it again3Heating is carried out with a gasoline injection wheel, and then the mercury will evaporate.
Hello Kiss I'm happy to answer this question for you,**Mercury removal tips 1Bake the surface of ** with an alcohol lamp, and then wipe the surface of ** with a towel after dismantling the sedan carBake the surface of ** with a sail flamethrower, and then polish it after the rough 3
Heating is carried out with a gasoline injection wheel, and then the mercury will evaporate.
If there is mercury on the gold jewelry. As long as the gold jewelry is placed on the flame of the alcohol lamp or gas stove, burned until it is red, the ants swim and hold it, and the flame is naturally cooled in the air, and you can remove the mercury from the sullen celebration. Friendly reminder:
This method is suitable for pure ** (above) products. Gold jewelry that has been worn out after cooling will be better if you use a detergent such as dish soap and a toothbrush to clean it.
-
Oxides can be removed from silver jewelry in the following ways:
1. You can add baking soda to clean water, then wash and wipe it, and then wipe the water on the silverware (ornament);
2. Use a silver cloth and silver paste to wipe;
3. Use a soft cloth dipped in some toothpaste to scrub the jewelry, then wash it with water, and wipe it clean with a cotton cloth;
4. Soak the silverware or silver jewelry in silver washing water, then wash it with water, and finally wipe it with a cotton cloth to keep it dry, but it is recommended to use silver washing water as little as possible, because silver washing water is a chemical product, which uses the corrosiveness of silver washing water itself to clean silver jewelry, and it will cause damage to silver jewelry after long-term use;
5. When the silverware is not in use, it is recommended to seal it with a sealed plastic bag to reduce.
-
Oxides can be removed from silver jewelry in the following ways:
1. You can add baking soda to clean water, then wash and wipe it, and then wipe the water on the silverware (ornament);
2. Use a silver cloth and silver paste to wipe;
3. Use a soft cloth dipped in some toothpaste to scrub the jewelry, then wash it with water, and wipe it clean with a cotton cloth;
4. Soak the silverware or silver jewelry in silver washing water, then wash it with water, and finally wipe it with a cotton cloth to keep it dry, but it is recommended to use silver washing water as little as possible, because silver washing water is a chemical product, which uses the corrosiveness of silver washing water itself to clean silver jewelry, and it will cause damage to silver jewelry after long-term use;
5. When the silverware is not in use, it is recommended to seal it with a sealed plastic bag to reduce.
Drink stains on black clothes, removed with the following methods: >>>More
1. Rice washing water to remove yellowing. Soak the clothes in rice washing water and let them sit overnight to remove the yellow stains of the white clothes. >>>More
1. Make the most of the summer sun.
We all know that sunlight contains ultraviolet rays, especially in summer. >>>More
How to remove tooth stains from people who drink tea regularly. >>>More
Coated with mercury. The mirror's ability to reflect light was not very strong, it was time-consuming to make, and the mercury was toxic, so it was later eliminated. Now the mirror, the back is a thin layer of silver. >>>More