How to remove mildew stains from cutting boards, how to remove mold spots from cutting boards

1. Make the most of the summer sun.

We all know that sunlight contains ultraviolet rays, especially in summer.

So, take the moldy cutting board outside at noon and expose it to the sun. It both kills bacteria and evaporates the moisture from the cutting board. This avoids the growth of mold.

2. Make full use of table salt.

Table salt is a great way to kill mold.

Then brush the cutting board with clean water and a cleaning ball until clean.

3. Make good use of baking soda.

Baking soda is alkaline and can kill mold very well.

So, you can prepare a basin of warm water and pour in an appropriate amount of baking soda. Then put the moldy cutting board into the basin and soak.

After half an hour, remove the cutting board and brush it with a cleaning ball. Then rinse with clean water.

4. Make full use of ginger.

Ginger is a great way to get rid of odors from moldy cutting boards.

Therefore, you can first use a cleaning ball to scrub the cutting board, then find a piece of ginger, peel it, and apply the cutting board all the time. After a while, rinse with water.

You'll notice that not only is the cutting board clean, but the smell is gone.

5. Keep the cutting board dry.

This method is actually the most basic.

Because, in addition to high temperature, another reason why cutting boards can become moldy is moisture.

So, every time you finish using the cutting board, after brushing it clean. Hang it in a ventilated place. Keeping it dry is the only way to get the problem at the source.

6. Make full use of hot boiled water.

Boiling hot water can kill bacteria well, which can kill all kinds of mold on the cutting board.

So, you can boil a pot of boiling water and pour it on the cutting board. Brushing while ironing. This is a great way to get rid of mold.

Wood or bamboo cutting boards are easy to mold, there is a large amount of aflatoxin after mold, it is a strong carcinogen, mold is serious, it can not be used, light can be washed, shovel off a layer, and then dry, which can reduce the mold of the cutting board.

1. Take advantage of the summer sun.

Sunlight contains ultraviolet rays, especially in summer. So, take the moldy cutting board outside at noon and expose it to the sun. It both kills bacteria and evaporates the moisture from the cutting board. This avoids the growth of mold.

2. Use table salt.

Table salt is a great way to kill mold. So, you can moisten the cutting board first and sprinkle it with a layer of salt evenly. Marinate for half an hour.

Then brush the cutting board with clean water and a cleaning ball until clean.

3. Use baking soda.

Baking soda is alkaline and can kill mold very well. You can prepare a basin of warm water and pour in an appropriate amount of baking soda. Then put the moldy cutting board into the basin and soak.

After half an hour, remove the cutting board and brush it with a cleaning ball. Then rinse with clean water.

4. Use ginger.

Ginger is a great way to get rid of odors from moldy cutting boards. You can first use a cleaning ball to scrub the cutting board, then find a piece of ginger, peel it, and apply the cutting board all the way. Rinse off with water after some time.

5. Keep the cutting board dry.

This method is actually the most basic. In addition to high temperatures, another reason why cutting boards can become moldy is dampness. After each use of the cutting board, after brushing it clean. Hanging it in a ventilated place and keeping it dry is the only way to solve the problem at the source.

1. Make the most of the summer sun.

There are ultraviolet rays in the sun, especially in summer, so you can take the moldy cutting board outside at noon to expose it to the sun. It both kills bacteria and evaporates the moisture from the cutting board. This avoids the growth of mold.

2. Salt. Salt can kill mold very well, you can first moisten the cutting board, and then sprinkle a layer of salt evenly. Marinate for half an hour. Then brush the cutting board with clean water and a cleaning ball until clean.

3. Baking soda.

Baking soda is alkaline and can kill mold very well, prepare a basin of warm water and pour in an appropriate amount of baking soda. Then put the moldy cutting board into the basin and soak the orange bubble, and after half an hour, remove the cutting board and brush it with a cleaning ball. Then rinse with clean water.

4. Ginger. Ginger can be a good way to remove the odor on the moldy cutting board, first use a cleaning ball to brush the cutting board, then find a piece of ginger, peel it, and keep smearing the cutting board. After a while, rinse with water.

5. Keep the cutting board dry.

This method is actually the most basic, the reason why the cutting board will become moldy, in addition to the high temperature, there is also a reason is humidity. After each use of the cutting board, after brushing it clean. Hang the bent pants in a ventilated area. Keeping it dry is the only way to get the problem at the source.

6. Hot boiled water.

Boiling hot water can kill bacteria well, so as to kill all kinds of mold on the cutting board, boil a pot of boiling water, and pour it on the cutting board. Brushing while ironing. This is a great way to get rid of mold.

1. Prepare materials.

To deal with moldy cutting boards, you first need to prepare the materials you need for cleaning. Contains: White vinegar, table salt and 80% boiling water.

2. Pour white vinegar.

Pour white vinegar on the moldy wooden cutting board, because white vinegar has the effect of sterilization and sterilization, so pouring some white vinegar on the mold has a good effect on removing mold.

3. Pour in the salt.

After pouring white vinegar into the wooden cutting board and leaving it for a while, then sprinkle an appropriate amount of salt on the moldy part of the wooden cutting board, mainly because the salt has the effect of sterilization and sterilization, so sprinkle some table salt.

4. Pour in hot boiled water.

Rinse the moldy area of the cutting board with 80° hot boiling water, mainly boiling water can remove a large amount of mold, which is conducive to better mold clearing.

5. Wash with cold water.

Then place the wooden cutting board in the sink and turn on the faucet to rinse for four minutes. Wash away the white vinegar, salt, and mold residue that has been killed from the cutting board so that it remains clean.

6. Pour in the white vinegar again.

After the wooden cutting board is cleaned with cold water, in order to remove all the mold on the wooden cutting board and ensure the cleanliness and hygiene of the wooden cutting board, you need to rinse the wooden cutting board with white vinegar again, so that the mold on the wooden cutting board is basically cleared, and then save the wooden cutting board.

Moldy meals are best thrown away and not eaten again because of the presence of bacteria. You can use some dish soap to clean the pots and bowls.

How to clean moldy cutting boards:1. The most direct and easiest way is, of course, to scald it with boiling water, it is best to use boiling water, first brush the moldy cutting board with a hard brush and water, and then soak it in boiling water, there are very few residual germs, and finally put the cutting board in the sun to dry.

2. Sprinkle some baking soda on the moldy cutting board, and pour some white vinegar on the cutting board sprinkled with soda, the combination of the two has a strong cleaning power, then continue to sprinkle some salt on the cutting board, and spread them evenly, and finally wipe the cutting board with a clean cloth to cover the cutting board of these mixtures, and then rinse it with water and let it dry in the sun. You will find that after the above treatment, all the moldy black spots on the cutting board are gone.

3. Friends who don't have baking soda at home can go to the supermarket to buy a lemon, first cut the lemon in half, sprinkle a little salt on the lemon, and scrub it vigorously on the cutting board, and soon you will find that the mold on the cutting board is significantly reduced, and finally rinse it with water, the mildew is basically gone, and there will be a lemon-flavored aroma on the cutting board, which is both good and hygienic.