Is there one door or two doors in the toilet?

Wet and dry toilets need to be fitted with several doors.

Regardless of the inside and outside installation, only one door is needed, and now the bathroom is open, it is recommended to install a door inside.

Separate wet and dry bathrooms with a few lights.

1. Large compartments and baths can be selected, and the general dry and wet partition design can effectively collect water vapor, which can better avoid the diffusion of hot air and have better warmth. The safety is also high, and it will not slip due to water splashing on the floor, and it can also reduce the damage of water vapor to some household appliances and reduce the probability of accidents such as electricity leakage. Large apartments can use glass compartments and shower rooms to achieve dry and wet separation.

The shower part can use a glass compartment, and friends who like to take a bath can also install a bathtub in the glass compartment. Shanghai decoration network suggests that under the premise of fully considering the privacy, the bathtub may be designed close to the window area, using natural light sources, and enjoying the scenery outside the window, and the ventilation of the bathroom area will be better. The shower room is divided into an integral shower room and a simple shower room according to its function.

The overall shower room has more functions, ** is higher, and generally cannot be customized. The overall shower room with steam function is also called the steam room, which allows the owner to enjoy the "steam" service at home. It is important to note that there is illness and high blood pressure.

Sick people and children are not allowed to use the steam room alone. And compared to the overall shower room, the simple shower room does not.

Is it better to install the door for dry and wet separation, and is it good to make the bathroom dry and wet separated?

Nowadays, most bathrooms will be designed to separate dry and wet, which makes people look more comfortable, and the whole bathroom will not be wet, and some elderly and children are not afraid that it will slip. All you need to do is install a door between the wet and dry zones. The main thing to consider is privacy.

There is no need to set up a door between the dry area and the outside world, it will be more troublesome to install, and it will also affect the lighting, it is recommended to make a pass, so that it is not a doorway, and it will solve the problem of door to door; You can also install a door curtain, preferably a half curtain, which can play a role in blocking and decoration, and does not affect the lighting. In fact, the separation of dry and wet is good, so that it looks like the space will be larger, and the use of some suitable materials makes it seem that the light is more limited, so it is necessary to use the right materials. Nowadays, most bathrooms will be designed to separate dry and wet, which makes people look more comfortable, and the whole bathroom will not be wet, and some elderly and children are not afraid that it will slip.

All you need to do is install a door between the wet and dry zones. The main thing to consider is privacy. There is no need to set up a door between the dry area and the outside world, which will be more troublesome and will also affect mining.

Does the bathroom need to be separated from wet and dry?

It is recommended to be in place at one time, there are many without partitions have been redecorated, get a shower room or screen separation, after taking a bath will not be filled with moisture, easy to clean. I use the carved screen of Leibotun at home, which is very delicate, and the push and pull are also good, and after using it, I feel that the mirror, faucet or something will not be so susceptible to water vapor erosion.

This mainly depends on the size of the bathroom, as well as the design of this dry and wet separation, if the door is not in the way, two doors are better.

In fact, this does not have to be entangled, you can make a door, you can also do two doors, if you are in the consideration of saving decoration costs, you can make a door. There are several advantages of separating dry and wet toilets: 1. Dry and wet partitioning is to separate the washing, convenience and shower functions of the bathroom, overcome the defects caused by cross-water in the past, and reduce the overflow of the bathroom wall and floor.

Try to take two doors so that you can better separate each other!

It is enough to install a door for the dry and wet separation of the toilet, and there is another one that does not need to install a door.

There should be a door at the door of the toilet, and the shower room has its own door, and if it is a shower curtain, it is also a door at the door of the toilet, so it is generally a door.

Then you can separate it, make it dry and wet separation, enter the door first hand basin, then the toilet and bathroom, of course, if the area is not enough, you can put the toilet bathroom in a space, and then use a sliding door and other handle basins to separate from others, the bathroom can use a shower curtain, so clean and hygienic. If you buy a good hand basin, you don't even need to install a bathroom door.

All you need to do is install a door between the wet and dry zones. The main thing to consider is privacy.

There is no need to set up a door between the dry area and the outside world, it will be more troublesome to install, and it will also affect the lighting, it is recommended to make a pass, so that it is not a doorway, and it will solve the problem of door to door;

You can also install a door curtain, preferably a half curtain, which can play a role in blocking and decoration, and does not affect the lighting.

I hope you'll adopt it.

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry.

2. Open separation.

Semi-open dry and wet separation refers to the use of glass or some brick walls to separate the sink, so as to achieve the effect of dry and wet separation, this separation method has achieved a clear division visually, although the dry and wet areas are still in the same space, but the two are completely independent, the effect of this scheme is very good.

3. Shower room.

Bathroom dry and wet separation shower room decoration is also a good program, shower room is a more popular way of bathroom decoration in recent years, owners can customize the size and shape of the shower room according to their own living needs and bathroom structure, the shower room can effectively prevent water vapor diffusion, is a better scheme design in the bathroom dry and wet separation.

4. Use the shower curtain for separation.

In order to reduce the budget, but also to achieve the effect of dry and wet separation, many families will choose to use the shower curtain for dry and wet separation, the installation of the shower curtain is simpler and faster, and at the same time can reduce the splashing of water droplets, and the style of the shower curtain, the style is diverse, the decorative effect is more prominent, so that the effect of the shower curtain blocking water vapor is not very obvious, if the economic conditions are better, it is not recommended to use this kind of amplification of dry and wet separation in the bathroom.

5. Use different ground materials.

The use of different floor materials for dry and wet separation is only to divide the dry and wet areas on the ground, and lay some more waterproof materials on the area where the bathroom is located, and choose materials with more comfortable feet at the washbasin, this method is usually used with the shower curtain, and the dry and wet separation is achieved visually, but the actual effect is not very good.

The shower door suitable for installation at the straight corner also has an "L" shape, and the size of the base of the shower room has a variety of specifications, and the accurate size of the installation position should be measured before installation, and the position and size of the drain should be considered.

Generally speaking, the height and body shape of Oriental people are suitable for using shower rooms above 90 cm and 90 cm. In terms of area size, it is also 90 cm 90 cm specification, and the area of the "L" shape is larger than the area of the arc.

If you want more shower space, the key is the door. For example, the Rhine shower sliding door of Glystard, we can not see the superfluous decoration, the large frameless glass with neat lines, the L-shaped sliding door can be opened and closed very interestingly, and the left and right doors are closed as a square shower room when used, and there is a waterproof sealing strip in the middle for them to be handed over; Usually, it closes into the shower room to make the bathroom appear more spacious. That way, we can have more places to maneuver.

Under the premise that the basic material of the shower door remains the same, the details are becoming more and more perfect, such as chrome plating on the aluminum frame part, increasing the brightness of the surface, making the product more noble, and at the same time there are different tones, which can match the overall color of the bathroom. The addition of waterproof materials on the inside of the glass of the shower room can play a role in strengthening the function of waterproof stains; The opening and closing of the push-pull shower door is also constantly improving, and the latest slide rail design is based on the principle of a fixed rotating lever, opening and closing the door with a rotating bearing of 90 degrees to 180 degrees, which is no longer light and fluttering, but has a heavy texture. Due to the small size of residential bathrooms at present, the design style in recent years has gradually tended to reduce the transparency of the frame, and make the shower door with a whole piece of glass to reduce the weight of the space.

It is recommended to use frameless glass sliding doors, which take up less space, are waterproof and durable, and are beautiful and beautiful.

Glass sliding door bar!! Other materials are not waterproof.

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry.

2. Semi-open separation.

Semi-open dry and wet separation refers to the use of glass or some brick walls to separate the sink, so as to achieve the effect of dry and wet separation, this separation method has achieved a clear division visually, although the dry and wet areas are still in the same space, but the two are completely independent, the effect of this scheme is very good.

3. Shower room.

Bathroom dry and wet separation shower room decoration is also a good program, shower room is a more popular way of bathroom decoration in recent years, owners can customize the size and shape of the shower room according to their own living needs and bathroom structure, the shower room can effectively prevent water vapor diffusion, is a better scheme design in the bathroom dry and wet separation.

4. Use the shower curtain for separation.

In order to reduce the budget, but also to achieve the effect of dry and wet separation, many families will choose to use the shower curtain for dry and wet separation, the installation of the shower curtain is simpler and faster, and at the same time can reduce the splashing of water droplets, and the style of the shower curtain, the style is diverse, the decorative effect is more prominent, so that the effect of the shower curtain blocking water vapor is not very obvious, if the economic conditions are better, it is not recommended to use this kind of amplification of dry and wet separation in the bathroom.

5. Use different ground materials.

The use of different floor materials for dry and wet separation is only to divide the dry and wet areas on the ground, and lay some more waterproof materials on the area where the bathroom is located, and choose materials with more comfortable feet at the washbasin, this method is usually used with the shower curtain, and the dry and wet separation is achieved visually, but the actual effect is not very good.

1. The dry area is designed outside the bathroom.

Dry area design is a completely separated design scheme outside the bathroom, this practice is usually to put the bathing area and the toilet all in the bathroom, the outside is used as a washbasin, and the middle is directly separated by a door, this scheme is the most thorough and effective, the separate handwashing station area avoids the conflict between the toilet and washing, for the family with more residents, it is very practical, in addition, this design is also very suitable for small apartment types, many owners will think that their bathroom area is too small, there is no way to achieve dry and wet separation, By placing the sink outside the bathroom, you can easily achieve the effect of separating wet and dry.

2. Open separation.

Semi-open dry and wet separation refers to the use of glass or some brick walls to separate the sink, so as to achieve the effect of dry and wet separation, this separation method has achieved a clear division visually, although the dry and wet areas are still in the same space, but the two are completely independent, the effect of this scheme is very good.

3. Shower room.

Bathroom dry and wet separation shower room decoration is also a good program, shower room is a more popular way of bathroom decoration in recent years, owners can customize the size and shape of the shower room according to their own living needs and bathroom structure, the shower room can effectively prevent water vapor diffusion, is a better scheme design in the bathroom dry and wet separation.

4. Use the shower curtain for separation.

In order to reduce the budget, but also to achieve the effect of dry and wet separation, many families will choose to use the shower curtain for dry and wet separation, the installation of the shower curtain is simpler and faster, and at the same time can reduce the splashing of water droplets, and the style of the shower curtain, the style is diverse, the decorative effect is more prominent, so that the effect of the shower curtain blocking water vapor is not very obvious, if the economic conditions are better, it is not recommended to use this kind of amplification of dry and wet separation in the bathroom.

5. Use different ground materials.

The use of different floor materials for dry and wet separation is only to divide the dry and wet areas on the ground, and lay some more waterproof materials on the area where the bathroom is located, and choose materials with more comfortable feet at the washbasin, this method is usually used with the shower curtain, and the dry and wet separation is achieved visually, but the actual effect is not very good.