How to maintain a new set of solid wood furniture?

The ground is level: The floor on which the furniture is placed must be kept flat, with all four legs stable and flat, preferably not on uneven ground. If the furniture is in a state of constant shaking and instability, it will cause the tenon or other firmware to loosen and fall off after a long period of use, which will affect the service life of the furniture.

Some people have a habit of laying wooden and iron boards under one leg of the furniture to compensate for the unevenness of the floor, which is not a good habit. If the pad moves slightly, it will also make the furniture unstable. Even if it is flat, the interior of the furniture will be subjected to varying degrees of ground force.

The best solution is to trim the floor or use a large area of carpet, hard plastic, etc., to achieve the goal of stabilizing the four legs.

Cleaning and dusting: It is best to use cotton knitted fabric as a rag and use a soft wool board brush to remove dirt from dents or embossed decorations. If the furniture uses paint as a coating, do not wipe the stains with alcohol, gasoline and other solvents.

Colorless furniture polishing wax can be used, applied thinly and evenly, and dried with a cotton cloth to reduce shedding and enhance shine.

Keep out of the sunIt is best to avoid direct sunlight outside the window, solid wood furniture is exposed to sunlight for a long time, and the paint will turn yellow, fade, and the metal part will appear oxidation and deterioration. Like this case, you can install curtains or blinds to protect the furniture.

Avoid moisture: Indoor humidity should be kept within normal values. When using a humidifier, you should spray away from solid wood furniture, as moisture will cause wood rot, metal fittings to corrode, glue parts easy to unglue and chrome plated parts easy to delamination.

Avoid using alkaline water to clean furniture, and do not use water to rinse directly, but use a damp cloth to wipe it.

Remove stainsPainted furniture will be yellowed after long-term use, you can use a pure white yarn knitted cotton cloth dipped in a little toothpaste to gently wipe, and then wipe off the toothpaste residue with a damp cloth, and then dry it with a dry cloth, which can greatly improve the yellowing phenomenon; Painted furniture, because often put boiling water cups and hot soup bowls on it, so there will be white burns, affecting the appearance, can be dipped in a little strong tea or toilet water, as well as a little alcohol, gently wipe, can be removed. If there are slight scratches on the surface of the furniture and the paint film is peeling off, you can use a colored pencil to slightly repair it according to the tone of the furniture, and then gently apply a thin layer of colorless transparent nail polish.

First of all, the ground should be leveled, dust should be removed, furniture should be kept away from sunlight, moisture should be avoided, and stains should be removed.

Clean it regularly and don't leave the set in a shaded and backlit place for long periods of time. Solid wood furniture is easy to get damp if it is placed in a cool place for a long time.

Solid wood furniture should be kept away from radiators and air conditioning outlets, away from direct sunlight, which can be blocked by curtains, and the indoor air should ensure proper humidity, between 40% and 70%.

Dusting should be done using a clean, soft cotton cloth, such as an old white t-shirt or baby cotton cloth. Drying the cotton cloth after soaking can reduce conflict and avoid scratching the furniture. Note!

To avoid residual moisture on the exterior of the furniture, it is advisable to wipe it again with a dry cotton cloth. Remember not to wipe down furniture with sponges or dishwashing utensils. In order to remove traces caused by airborne pollutants, cooking fumes, stains from the operation process and residues from the glazing process, Archium advocates the use of special furniture cleaners.

This solvent can also help remove residual wax. It can be cleaned once every half a month. Solid wood furniture generally needs regular waxing maintenance.

Normally, waxing can only be done once a quarter, so that the furniture looks shiny, does not absorb dust from the outside, and is easier to clean. And it can lock the moisture in the wood, which is conducive to avoiding cracking and deformation of furniture.

Before using a wax polish, you should check that the appearance of the furniture is intact. Use a muslin cloth to wipe off the outside dust, and a small amount of steam and alcohol to wipe off stains that have been left for too long or are difficult to remove. Then apply it with a small piece of cotton cloth and an appropriate amount of wax polish, and then use a larger dry cloth to evenly wipe the wax in the form of a circle.

Don't wax too often, or it will clog the pores of the wood. The mortise and tenon structure must not be forgotten: the mortise and tenon structure is very important for solid wood furniture.

Once loosened and dropped, solid wood furniture should not be used continuously. Therefore, it is usually necessary to pay attention to check these joints for parts to fall off, degumming, tenon cracking, tenon loosening, etc. If the tenon is cracked, please ask a professional maintenance personnel to deal with it.

Being too close to the heat source simply allows the wood to lose water, causing some dryness and deformation. Therefore, when using solid wood furniture, it should be avoided from direct sunlight and kept away from heat sources as much as possible, such as strong heating, at least about one meter. Do not usually put hot cups, teapots, etc. directly on the furniture, otherwise it will burn the furniture.

It is best to add a layer of thermal insulation pad. Solid wood furniture should not be placed in an excessively dry environment, pay attention to the humidity balance, the indoor air is relatively dry, and it is easy to cause cracks that are difficult to repair. When the weather is dry, you can use a humidifier, put a pot of water or plant it indoors to increase indoor humidity and effectively solve the problem of cracking of solid wood furniture.

However, it is necessary to pay attention to the humidity balance and not to overdo it. Wood is hygroscopic, try to avoid excessive humidity. In addition, furniture care essential oils can be used to moisturize solid wood furniture, lock in moisture in the wood, prevent wood from cracking and deforming, nourish the wood, prolong the life of the furniture, and prevent the furniture from getting wet.

For solid wood furniture or wood products coated with wood wax oil, using wood wax oil 1-2 times a year is a very effective and simple method of furniture maintenance. In the face of inevitable climate change, furniture that has been regularly maintained will also be more "resistant", shiny, and the surface will not absorb dust, making it easier to clean. The time limit for waxing is also tricky.

Commonly used furniture such as dining tables, coffee tables, chairs, etc. It is recommended to use it every six months, and other furniture can be selected once a year. First and foremost, the most important thing is to clean the surface of solid wood furniture.

Then, wipe evenly along the texture of the solid wood furniture with a cotton rag. This process can be repeated, but not too many times. It is enough for the wood to absorb the wax evenly.

The solid wood furniture purchased at home, the usual maintenance methods are: 1Usual cleaning, including dusting and cleaning, it is best to use a clean soft cotton cloth when dusting, such as old white T-shirts or baby cotton cloths, etc.; 2.

Waxing, solid wood furniture generally needs regular waxing maintenance, under normal conditions, only once a quarter can be waxed; 3.Heat-proof or moisture-proof, the heat resistance of solid wood furniture is poor, too close to the heat source, simply make the wood lose water, moisture-proof, solid wood contains water, when the air humidity is too low, hardwood furniture will be shortened, too high will be expanded.

Pay attention to the cleaning and maintenance of furniture surfaces. To keep solid wood furniture clean, it is recommended to wipe the dust on the surface with a cotton cloth every day, including furniture, and clean the dust at the corners. Avoid using alcohol, gasoline, or other chemical solvents to remove stains.

It is recommended to wipe it with warm tea water, apply a little light wax on the original part after drying, and gently grind it several times to form a certain protective film.

If you want to maintain solid wood furniture, you can buy those essential oils that are specially used to clean solid wood furniture online. If you feel troublesome, you can use soap to replace some soapy water, gently wipe the floating ash on it with a soft towel, and then use a dry towel to wipe off the water stains on the surface.

1. Daily cleaning can be wiped with soapy water.

2. Regular waxing, furniture wax can be used.

3. You can also use furniture essential oil, Bi Lizhu, etc. to care for the following precautions for solid wood furniture: try to avoid large temperature and humidity differences between indoor and outdoor, resulting in cracks in solid wood furniture.

The heat resistance of solid wood furniture is generally poor, and it is too close to the heat source, which is easy to make the wood lose water, and local dry cracking and deformation occur. Therefore, solid wood furniture should be avoided from direct sunlight when used, and at the same time try to stay away from heat sources, at least about one meter. The indoor humidity of solid wood furniture must be slightly higher than its own moisture content, so consumers should understand the moisture content parameters of solid wood furniture when buying furniture, and refer to the humidity of the use environment marked on the manual.

Solid wood furniture is a type of furniture that is durable, but it will also leave traces of time after a long period of use. At this time, the owner needs to renovate and maintain the solid wood furniture. However, how to renovate solid wood furniture when it is old?

What are the maintenance methods? Let me introduce you!

1. Dentation treatment.

Solid wood furniture has a dent, you can first wipe the dent with a damp cloth, after a while to see if it swells due to water absorption, if there is no change, you can put a wet cloth on the furniture, and then iron it with an iron at low temperature to make the recess swell, and then smooth it with fine sandpaper.

2. Scratch treatment.

Scratches are a common problem on solid wood furniture, and it is also the main reason why solid wood furniture becomes mottled, when we find that there are scratches on the surface of solid wood furniture, you can apply a layer of cod liver oil on its surface, and wipe it after a day, simple and convenient.

3. The topcoat falls off.

Wipe once or twice with half a cup of water and 1 4 vinegar, or with alcohol, toilet water, or tea on a soft cloth, and then wipe the floor wax again. At the same time, this method can also remove the traces of whitening on the paint surface.

Fourth, daily cleaning.

Wood has the characteristics of thermal expansion and contraction, easy to be corroded, etc., so when wiping solid wood furniture, it is good to wipe it with a wet fine rag, and it must not be washed with hot water, alkaline water or disinfectant water, so that the residual temperature or chemicals will destroy the paint on the surface of the furniture, and the gains outweigh the losses.

5. Daily maintenance.

Solid wood furniture should not be placed in places that are too wet, too humid, too high in temperature, near vents, radiators, etc. In normal times, the dragging of furniture should also be minimized, so as not to affect the internal structure of solid wood furniture and cause unnecessary losses.

The above are the five key points of the renovation and maintenance of solid wood furniture that I brought, I don't know if it helps friends who are preparing for furniture to be renovated?

Maintenance of solid wood furniture.

Prevent excessive**: Light has a damaging effect on solid wood homes, and the infrared rays in the light can cause the surface of the furniture to heat up, resulting in warping and brittleness. The harm of ultraviolet rays is greater, it can not only fade the furniture, but also reduce the mechanical strength of the wood fiber, so that the life of solid wood furniture is not long.

2. Dry-proof and moisture-proof: Dry and damp are the two major enemies of solid wood furniture. If the air humidity is too low, the moisture content of the furniture wood is insufficient, and there will be warping or drying, cracking and brittleness, loosening of the structure, and increasing the number of gaps.

If the air humidity is too high, it will cause the solid wood furniture to swell and distort it. 3. Remove dust: The dust on the surface of solid wood furniture can be removed with a soft brush, and then gently wiped with a softer cloth.

Of course, it is also possible to use a vacuum cleaner to absorb dust from outside the crevices and hidden parts. 4. Waxing regularly: Waxing should be carried out after the dust is completely removed, otherwise wax spots will be formed, or cause wear and tear, and scratches will occur, but you must remember to wax regularly.

5. Avoid touching: When handling solid wood furniture, be sure to lift it above the ground, lift it gently, or use thick plastic foam packaging to carry it tightly, and never drag it on the ground to avoid unnecessary damage to the solid wood furniture itself.

In order to better use the furniture, of course, it is necessary to maintain, now many people buy a mobile phone and film it, if you are relatively wealthy, a few years to change a set of furniture, then there is no need to maintain, to the time to lose it.

1. Solid wood contains water, and hardwood furniture will shrink when the air humidity is too low, and expand when it is too high. Generally, solid wood furniture has a lifting and shrinking layer during production, but it should be noted that it should not be placed in a place that is too humid or too dry, such as near a high temperature and high heat place such as stove heating, or a place such as a basement that is too humid, so as not to produce mildew or dry cracking.

2. Solid wood furniture sticks to the oil, residual tea is an excellent detergent, after wiping, spray a small amount of corn flour to wipe, and finally wipe the corn flour. Corn flour absorbs all the dirt that adheres to the surface of the furniture, making the paint smooth and bright.

3. If the surface of solid wood furniture is white wood paint, it is easy to turn yellow over time, you can wipe it with a rag dipped in toothpaste, and be careful not to use too much force. You can also stir the two egg yolks well, apply them to the yellowed area with a soft brush, and carefully wipe them clean with a soft cloth after drying.

4. Avoid placing too heavy items on the surface of the furniture for a long time, otherwise the furniture will be deformed. Even if it is a table made of solid wood, it is not advisable to lay non-breathable materials such as plastic sheeting on the tabletop.

5. The surface of the furniture should avoid friction with hard objects, so as not to damage the surface texture of the paint and wood, such as placing porcelain and bronze and other decorative items to be particularly careful, it is best to pad a soft cloth.

6. If the floor in the room is uneven, it will cause the furniture to deform for a long time, and the way to avoid it is to use small wooden pieces to flatten it. If it is a bungalow or a low-lying house, the furniture legs must be properly raised if the ground is wet, otherwise the legs are prone to moisture corrosion.

7. Never wipe solid wood furniture with wet rags or rough rags. Use a clean and soft cotton cloth, add a little furniture wax or walnut oil after a while, and gently rub it back and forth along the wood grain.