-
Good is good! But if you don't have a light cup, you may be arrested by the police!
The brand is the first choice Philips! It would be nice to have 6000k!
-
It is not possible to change the bulb in your car, the headlights of the Cruze are H4, and the xenon lamp will only be more astigmatism after changing the xenon lamp, so you should consider adding a set of bifocal lenses.
If you only change the bulb without a lens, it will astigmatize, and Philips does not seem to have an H4 xenon lamp. (h7's around 1800-2000's).
You can consider other brands.
-
Let's change the lens, one step in place, <>
-
To change the lights, you should also choose a regular and experienced service center. As a professional automotive lamp upgrade service center in Wuhan, Rely Auto Lighting Upgrade specializes in providing services such as bifocal lens xenon lamp upgrade, original high-end headlight upgrade, and automotive computer EUC upgrade. The introduction of annual examination and testing equipment for car lights, regular lamp changes, do not change the original car line, and the annual examination meets the standard!
Make your car upgrade more realistic! More standardized! Safer!
-
This car is a combination of far and near light, to change the xenon lamp suitable for your own car, what to change, good service, good after-sales, is a good product.
You can go to this forum and check it out, there are a lot of them, you can look for them.
-
Cruze modified hernia headlights are generally about 1000 yuan:
1. Xenon lamp (Paizhou HID) is a high-dust stove pressure gas discharge lamp;
2. Xenon lamp is a heavy metal lamp, by filling a variety of chemical gases in the anti-ultraviolet crystal quartz glass tube, such as xenon and other inert gases, and then through the supercharger to instantly increase the on-board 12 volt power supply to 23000 volts, under high voltage, xenon will be ionized and generate a light source between the two poles of the power supply;
3. The performance of xenon lamp has been significantly improved compared with halogen lamp, its luminous flux is more than twice that of halogen lamp, and the efficiency of converting electrical energy into light energy is also increased by more than 70% compared with halogen lamp;
-
The cost of converting the Cruze to the LED headlights:
1. It depends on how you change Zheng Bulk, if you replace the LED headlight bulb separately, the ** plus the working hour cost of the two headlight bulbs is about 600;
2. If the headlight is replaced, the assembly is about 1500 for a single headlamp; Next to Chi Cong.
3. It only takes a few hundred to change the bulb alone, about 500. If the effect is good, it is still at least 2,000 to modify the domestic lamp set;
-
1. Unplug the plug behind the headlight, this plug is relatively tight, and you need to use some force.
2. Next, pull down the dust cover, which is made of rubber very soft, and it will come down with a little force.
3. After removing the dust cover, there is a metal rod to fix the bulb, pinch the two ears and push it inside, and then pull it out, and the fixed rod is taken down.
4. After that, you can take the bulb down, in order to avoid burns caused by overheating of the bulb, it is recommended to wear gloves or wrap it in a cloth. Note that when holding the bulb, your hands should not touch the upper part of the glass, but only the lower part, otherwise the glass will be seriously affected by grease.
5. Next, put the bulb back into the lamp holder, and when installing the bulb, you should ensure that the action is gentle to avoid damage caused by bumps, and the position of the card slot corresponding to the base of the bulb should be aligned.
6. After putting the bulb in, fix the position of the bulb with a wire clamp to avoid shaking the bulb and scratching the glass surface when inserting the interface.
7. Then, align the corresponding plug of the bulb base and insert the interface firmly, at this time, the interface must be installed in place to avoid short circuit.
8. After changing the bulb, cover the dust cover tightly.
9. Then the work of changing the bulb is completed.
-
At present, there are four ways to modify headlights in cars1: Add a pair of high-brightness halogen bulbs such as silver warriors. This method costs the least amount of money and can improve the least effect.
2: Add a set of xenon lamps, the brightness is about twice as high as the original car, but because there is no lens, the astigmatism is terrible. The car on the opposite side is unbearable, and the original Focus car does not have a single light lens, so this method is not recommended!
3: Equipped with bifocal lens and xenon lamp, this solution is more cost-effective. The brightness has increased significantly.
However, the disadvantage is that the working hours are relatively long, and the requirements for the modification master are relatively high. It is recommended to install it in a professional relighting shop. 4:
Replace the headlight assembly, this method is also better. Exterior control. However, the cost control, the lenses used in it are relatively poor.
However, it has improved a lot for the original car.
-
The Cruze tail light is removed and replaced with the bulb as follows:
1. Open the trunk lid, cut off the power supply of the vehicle, clean the luggage compartment, and leave space for replacement;
2. Remove the dust plate on the back of the headlight. Most of the lights are divided into two forms: the bulb and the lamp holder are integrated and the bulb and the lamp holder are separated, the former is introduced here, and the latter is seen below for the replacement of the headlights;
3. Determine the lamp that needs to be replaced, press and hold the rotating handle on the rear of the lamp, and unscrew it. Replace the lights with new ones, pay attention to the model and color of the lights;
4. Install recovering lights and dust plates. Generally speaking, the disassembly and assembly of taillights is relatively easy, one has a large working space, and the other is relatively simple structure.
-
1.Development momentum cover. 2.
Unplug the headlamp bulb socket. 3.Open the waterproof bowl of the bulb of the headlight and pull it apart directly.
Pay attention to wipe first to avoid dust. 4.Hold the clamp spring that holds the bulb in place, screw it out, and remove the bulb.
5.Replace the bulb, noting the corresponding position of the gap, hold the collar and press it back until it is in place. 6.
Buckle back the waterproof bowl and take care to avoid dust. 7.Plug the headlight socket back in.
The Cruze headlights can be swapped out for LED bulbs. The Cruze model is an H4 model. If you replace the LED bulbs, you need dual lenses.
LED lights are lights that use LEDs (light-emitting diodes) as their light source. Due to the characteristics of high brightness, rich colors, low power consumption and long life, LED has been widely used in the automotive field.
Advantages of LEDs:
The light-emitting diode encapsulates a delicate chip in epoxy resin. Its particles are small and light, making them difficult to destroy. Compared with ordinary bulbs, it is more drop-resistant, durable, and not easy to break.
LEDs have a long service life. In general, 100,000 hours can be used. What is the concept? It is equivalent to 11 years, which is the longest service life of all kinds of lamps.
LEDs emit a variety of colors of light, just like many night scenes of cities, which are all light effects created by using it. Compared to other light types, its colors are more subtle and colorful.
Millions of car purchase subsidies.
-
1. Open the engine cover. 2. Unplug the headlight bulb socket. 3. Turn on the waterproof bowl of the headlight bulb and open it directly, paying attention to wipe it clean first to avoid dust.
4. Pinch the circlip that holds the bulb in place, turn it outward, and take out the bulb. 5. Replace the bulb, pay attention to the corresponding position of the notch, pinch the circlip, and press it back until it is in place. 6. Buckle back the waterproof bowl and pay attention to avoid sticking dust.
7. Plug the headlight socket back in.
Cruze headlights can be replaced with LE D bulbs, Cruze car models are H4 models, and if you replace LED bulbs, you need to be equipped with bifocal lenses. LED lights are lights that use LEDs (light-emitting diodes) as the light source. Because LEDs have the characteristics of high brightness, rich color variety, low power consumption and long life, LEDs are widely used in the automotive field.
Advantages of LEDs:
LEDs are made of delicate wafers encapsulated in epoxy resin, which is very small and lightweight, and is difficult to damage. Compared to those ordinary light bulbs, it is more resistant to drops, durable, and not easy to break.
LED has a long service life, generally speaking, it can be used for 100,000 hours, what is this concept, it is equivalent to 11 years of use, which should be the longest service life in various lamps.
LED emits many bright colors, like many city night scenes, which are used to create lighting effects. Compared with other types of lights, its colors are more colorful.
Photo by Li Shuiqing) @2019
1.First of all, I replaced the low-profile reading lamp.
2.Removed low-profile lights. >>>More
The new car includes two powertrains, a total of 6 models, with prices ranging from 10,000 yuan to 10,000 yuan. Among them, the new 320 automatic Xuanfeng urban version model, the official guide price is 10,000 yuan. The specific selling price is as follows:
Highly recommend Sega. Reason: I Jiaou series car, Cruze stick car; The body proportions of the Sega sedan are significantly different from those of the Cruze, the Sega sedan divides the length of the body more to the occupant's riding space, and is more like a hybrid of an MPV and a sedan, while the Cruze is a very standard sedan; Reason: The third Sega is the only model in its class that is equipped with cruise control and speed limiter as standard, which greatly improves driving pleasure and safety. Reason: The safety factor of Sega IV is higher than that of the Cruze, and maintenance is relatively cheap.
The Cruze sports styling, the Skoda Octavia as a family sedan, the positioning is different. If you are young and energetic, buy the Cruz, and if you are mature and stable, buy the Skoda Octavia. Both cars are good cars.
The parameters of the horn are fixed, and each horn has its own fixed frequency characteristics. I know that the crossover point of the general bass is generally set to about 120Hz, but how to set the crossover point of the middle and high tones? The power amplifier only amplifies the audio power, and to put it simply, it is the power to push the speaker, which has nothing to do with the parameters of the speaker. >>>More