How to connect Toshiba TV to a mobile phone, how to project Toshiba TV

If the Toshiba TV is an Internet TV and has a network port, it can be directly connected to the LAN port of the router to access the Internet, and the specific operation method is as follows:

1. Connect the computer and router first, and set the router to connect to the broadband network;

1. Connect the broadband modem, router and computer as shown below. Connect the WAN port of the modem and the router with a network cable so that the router receives the network signal; Then use a network cable to connect the LAN port of the router and the network port of the computer host, so that the computer can receive the network signal transmitted by the router.

2. Power on the cat, router, and computer; Open the browser on your computer, enter the settings of the router (take tplink as an example)**", enter "admin" in the pop-up username and password dialog box, and then log in to the router's settings interface.

3. Under the settings interface of the router, click the WAN port setting under the network parameters on the left, enter the broadband and password of the network where the user is located, and then click Save; The router is successfully connected to the broadband network.

4. After completing the router settings, save and exit the router settings and restart the router. At this time, the computer can be connected to the router to surf the Internet, and you can open the web page to surf the Internet for testing.

2. Set up the network where the TV is connected to the router;

1. Required conditions: TV, networked router, network cable;

2. Connect one end of the network cable to the LAN port of the router and the other end to the network interface of the TV.

3. Turn on the TV, operate the TV with the remote control, and enter the "System Settings";

4. Under the interface of system settings, select "Network Settings" on the left, click on the right to appear the detailed interface of network settings, select "Wired Settings" and click to enter.

6. Through the above settings, the TV can be connected to the router to surf the Internet.

How does the TV connect to a mobile phone?

Summary. How to cast the screen of Toshiba TV.

1.Toshiba TV,You can use the app on your mobile phone for intelligent screen projection,Multi-screen interaction,What you want to see on your phone**,**,**Files, etc. can be projected to the big screen of the TV。

Hope it helps. ☘️

How to cast the screen of Toshiba TV.

Hello, glad to be able to answer your question, I hope my next one will be helpful to you.

How to cast Toshiba TV 1Toshiba TV,You can use the app on your mobile phone for intelligent screen projection,Multi-screen interaction,What you want to see on your mobile phone**、**,**、Documents, etc. can be projected to the big screen of the TV2Method: TV and mobile phone are connected to the same wifi,Open**app,****,Click on this cracked wax icon,Click on your TV model to chant,You can cast the screen, I hope it will help you。

Icon TV cannot be sent due to system maintenance.

1. First of all, make sure that the TV and mobile phone are connected to the sameWi-Fi.

Lebo projectionand turn it on, remembering the name of the device displayed in the upper right corner;

4. After the link is successful, click the orange [TV] button at the bottom of the phone, and a prompt will appear [Lebo projection will start to capture all the content displayed on your screen], select [Touch the button to start immediately];

5. At this time, the TV screen will synchronously display the content on your mobile phone, press the home button.

Summary. 5. Enter the password corresponding to the wifi in the pop-up password input box, and then click connect now, and the TV can be connected to the router's wifi to surf the Internet;

Wait a minute, I'm sorting it out for you.

Does the TV have built-in Wi-Fi function?

The TV has requirements for the setting of the wireless state closed router in the letter shed: WPA encryption method, the password type is selected TKIP, the PSK EAP is selected PSK, the password needs to be set to 8 digits, and the password can be used as a number 0-9 for TV identification.

2. After the setting is completed, select the wireless settings of the TV, enter the password, and automatically obtain the IP address, and the connection is successful.

If the TV does not have a built-in wifi function, it needs to be equipped with a wireless network card, and the TV has requirements for the wireless network card chip model.

Hello, you first check to see if your TV has a built-in wifi function.

I don't know where to find it.

I'll send you the steps first, and you can see if you can connect to them.

Good. 1. Turn on the TV and enter the main interface of the TV; 2. Operate with the remote control, find the system settings, and find the network settings after opening; 3. After entering the network setting bridge, find the wireless network settings and press the confirm button to enter the wireless network setting interface.

4. After entering, first turn on the wireless network to talk about the limb connection, the TV system will automatically detect the wifi signal around the world test and display it, the user selects the wifi signal sent by the router at home, click to connect;

5. Enter the password corresponding to wifi in the pop-up password input box, and then click connect immediately after the hole, and you can connect to the wifi on the router next to the TV sail;

6、Successfully return to the main interface of the TV with the network,Open the browser and enter**You can surf the Internet。

Try it first and see if there is a wireless network setup interface.

Let's follow the steps first, step by step.

This is almost the same as connecting your phone to wifi.

You try first, don't ask me.

Hello, is it connected?

No, I can't find where the system is set up?

The main interface of the TV.

Take a ** for me.

After turning on the TV.

App Service. See?

Set up. Point settings.

Wireless connectivity. See if there's any in the wireless interconnection.

There is one underneath the middle.

Enter the initial letter "dsjmd" in the TV program list on the search interface, and click **Install on TV. 3.Open it after installation,Stay in the main interface,Press in turn(Note that it is in order)The remote control【Left、Right,Left、Left、Left Mingbend、Right] button,You will see the TV automatically start**Live broadcast software。

4.After installation, open it,You can free **TV station programs,Successfully solved the problem of how Toshiba TV accompanies the ruler to call out the channel。

Hello, dear I am Xiaoqiang, a life coach, and I am very happy to be able to answer for you. Different models of Toshiba TVs may have different remote control pairing methods,Here are two common methods for spike noise:Automatic search match:

1. Turn on the TV2、Press the "Settings" or "Menu" button on the remote control to enter the setting interface of the TV3、Select options such as "Remote Control Settings" or "Remote Control Pairing"4、Press and hold the power button on the remote control until the TV receives the pairing signal5、Wait for the prompt message of successful pairing,At this time, the remote control can be used normallyManually enter the pairing code:1、Turn on the TV,And find the guess the pairing code of the remote control of the TV bumper machine (generally in the manual or on the label behind the TV)2, press the "Settings" or "Menu" button on the remote control to enter the TV's settings interface3, select "Remote Control Settings" or "Remote Control Pairing" and other options4, enter the pairing code and wait for the prompt message of successful pairing, at this time, the remote control can be used normally If the above methods cannot solve the problem, it is recommended to check the manual or contact the Toshiba after-sales service center for a more accurate pairing method.