How are the specifications of computer hardware interpreted?

The graphics chip is the core chip of the graphics card, and its performance directly determines the performance of the graphics card.

DDRII stands for Machine Memory, and Yes II stands for Dual-Channel Memory Module.

The CPU is the heart of the computer, and it is as important as the heart is to the human being. Actually, the processor is more like the brain, because it's responsible for processing and processing all the data inside the computer, and how good or bad it is determines how fast the machine runs.

Nominal clock speed is used to indicate the computing speed of the CPU.

The front-side bus means that the greater the amount of data transferred between the CPU and the memory, the more the CPU can be fully utilized.

L2 cache Cache is used to store some commonly used or upcoming data or instructions, when these data or instructions are needed to read directly from the cache, which is much faster than reading to memory or even hard disk, which can greatly improve the processing speed of the CPU.

Kernel architecture refers to the memory structure of the CPU.

The motherboard chipset is the core component of the motherboard, which connects the operation of the CPU and other peripherals. If the CPU is the heart of the entire computer system, then the chipset will be the torso of the entire body.

As such, the processor model Intel Core 2 Duo P7350

Intel is the processor differentiator, now there are two, one is Intel, one is AMD, yours is Intel, Core 2 is the platform, there is a Pentium system, Celeron's, yours is Core 2.

Dual-core, there is a single-core, dual-core, and quad-core, yours is a single-core, and the 7350 in the back is the model, hehe.

This one... There are too many, and it is recommended to Baidu it yourself.

Computer specifications and models are mainly on the brand machine, referring to the brand machine, which is generally attached to the back of the chassis by a label, most of which are divided into series, and then named after the model of the CPU. Here's how to check your computer's specifications and model:

1. First of all, press win+r to open the running window, enter the dxdiag command, and click OK to enter.

2. After the confirmation is confirmed, the following window will pop up, and the system model can be seen in the system, and the computer specifications and models can be seen in this interface.

3. You can select the computer option on the desktop, and right-click the properties to enter.

4. Or click to open the windows icon in the lower left corner.

5. Enter the system interface of the control panel, and click on the windows index to enter.

<>7. After clicking in, you can see the specifications and models of this computer.

Ask for the specific meaning of the computer model.

Does it refer to size? I think there's a 17r one. It should be the size, right? A: Yes.

What do you mean? Answer: I don't know, it should be the model of the sound card or network card

What is the meaning? A: Core i7 4500U

Description: Dell notebook, inch screen, i7 processor (CPU) 8G memory 1TB (that is, 1000G) hard disk, Windows 8 operating system.

It's a pretty good notebook and it should be a lot of money.

What are the specifications of the computer hall potato?

It refers to the size, weight, etc. of the computer.

What does the laptop model mean.

3317U and 3337U are related to the CPU of the ultrabook, and the CPU of the two computers is different.

What are PC specs.

CPU frequency, memory size, monitor type and model, graphics card type and memory size, motherboard type and model, .......

The size of the general computer screen is a few sizes.

Do you want the size or resolution of the monitor? Monitors are generally 17 inches, 19 inches, 22 inches, and larger!

The resolution is generally 1024*768, 1280*960, 1280*1024, 1440*900. It's probably these, but it's still based on personal preference, depending on whether you like a 16-to-9 widescreen or a 4-to-3 screen! If you think you can use it, thank you!

What do all the letters of the computer model mean?

Different brands, the same letters, have different meanings.

What does the WD in the size of the computer stand for?

Length and width and thickness ah ......

What does TM mean on a computer model?

TM is a registered trademark, but it has not been officially authorized to you, also known as OEM.

What does computer size mean? 10 points.

It's just the size of the display,It means that the display screen is 16:9 ratio of diagonal length inches,It has nothing to do with the configuration of the computer,If you buy a computer, it depends on the configuration level,The configuration is very important to the speed and experience of the computer。

What are the specifications and models of the electric celebrity.

Your question should refer to the brand machine, because the assembly machine can't be divided like this. The brand machine and model are all ordered by themselves, and they can't be used to refer to anything specifically, but most of them are divided into series, and then named after the model of the CPU.

win7 how to look at the computer configuration.

1) The first tool needed is definitely a computer equipped with win7 system, followed by the more commonly used hardware detection software.

2) When how to pass the system detection of win7, first turn on the computer, enter the win7 system, and see if the desktop has a "computer" style icon. If not, you need to right-click the mouse, select "Personalize" to change the desktop icon, and then tick "Computer". If you have one, just click on it.

3) If the system is win7 home normal version, click on the menu, there will be the word computer in the menu, and then right-click "show on desktop". This will allow you to place the Computer icon on your desktop.

4) Facing the "Computer" icon, continue to right-click, and select the "Properties" option to view the basic configuration of the computer. This includes the version, CPU, operating system, and installation memory. You can also look at the hardware configuration performance of the computer through the system.

5) The above is a preliminary look at the computer configuration, and a more comprehensive view of the computer hardware message should be on the left side of the property page click "Device Manager". ***, IDE ATA, IEEE 1394, and options such as processor, disk drive, etc., will appear. There is also information on all aspects of the graphics card and optical drive, and you can view it in detail if you need to view it.

6) Now the configuration of most computers can be viewed, but the view of hard disk capacity has not been solved. Then you need to right-click on "Computer" and select "Manage" to enter Disk Management. You can almost see the total capacity of the disk, which is usually calculated in g.

Hardware configuration is checked by professional software.

If the hardware information you see through the above methods is not detailed enough, then you can use some professional hardware detection tools for hardware detection! The most famous hardware detection tool is aida64, we first search for aida64 and ** to the computer.

**AIDA64 is generally a green version of the software, which can be used after unzipping. Directly run the "file" in the program folder to run the detection, the first run of the software will automatically collect the hardware information of the computer, and the information collection will automatically enter the main interface of the software.

After entering the main interface of the software, you can see that there are very detailed hardware testing items, and you can click directly to view the specific hardware parameters. The data displayed here is much more powerful than the device manager that comes with the Windows 7 system, not only the specific hardware model, but also the specific specifications are very clear, through which you can detect the hardware configuration of the computer very comprehensively.

If you want to see the detailed computer hardware specifications, Master Lu is a good choice, and his so-called computer score can't be believed. . .

There are many software tools available online to check your computer's configuration and hardware specifications.

A little more ordinary, the common one is the master, 360 and the like, you can see more rough hardware information.

If you need professional and detailed information, it is recommended to use AIDA64, which can not only look at the configuration, but also see very detailed hardware information.

It should be noted that the information seen by the master and the like can be faked, and the most reliable detection results are to reinstall the system and then check the configuration.

How to look at the model of the computer motherboard.

Method 1: Intuitive observation.

Many motherboards will be marked with the product model, such as the early G41 motherboard, which will clearly indicate its brand and model on the motherboard. In addition, you can also check the motherboard manual to know the detailed motherboard model. In fact, there is a simpler way, observe the self-test of the computer every time it is turned on, the screen with white characters on a black background of the general boot self-test, the first screen shows the information of the graphics card, of which the first line is the model of the graphics card chip; The second line of the second screen is the information of the motherboard BIOS, which has "

award bios...or ". .ami bios...

the word ; The third row of the second screen is the model and version of the motherboard. To see clearly, press the pause break key to stop the screen and press the enter key to continue.

Method 2 to check the motherboard model: Use hardware and software such as Master Lu, Optimizer, and Everest to detect.

The author recommends using software to view the motherboard model, and the motherboard information seen in this method is often very clear and clear, and there is no need to find the manual or carefully search and observe it like the above. Here is a comparison he recommends that you use Master Lu to view the motherboard model, the use method is very simple, only need to ** a Master Lu, and then after installation and startup, you can see the name and model of each hardware of the computer detected by Master Lu, of which the motherboard model is among them, as shown in the following figure:

Method 3: Go to the DirectX Diagnostic Tool to check the motherboard model.

From the desktop to enter the start of Run in the opening Run dialog box and enter dxdiag, as shown in the following image:

As shown in the figure above, enter DXDIA in the Start Run dialog box and press "OK" to enter the "DirectX Diagnostic Talk Tool", if there is a prompt when entering, press the enter key directly to confirm the entry. After entering the DirectX Diagnostic Tool page, you can see the motherboard model in the system information, where the motherboard BIOS version information is the motherboard-related information.