-
Detailed tutorial on GPRS setup.
www via GPRS:
1. Settings - Connection - GPRS - New Creation.
2. Description: GPRS for WAP
Connect to: WAP network.
Access point: CMWAP
Username:
Password: Primary DNS:
Secondary DNS:
IP Location: 3. Settings - Connection - Proxy - New Creation.
Description: WAP
Connected from: WAP network.
Connect to: Secure WAP network.
Proxy (name: port): 9201
Type: WAP
Username:
Password: Settings - Connection - Proxy - New Description: Web
Connected from: WAP network.
Connect to: Internet.
Proxy (name: port): 80
Type: http
Username:
Password: 4. "Complete" to the [Connection] item, Menu - Advanced Internet Connection: Automatic.
Company Connection: Automatic.
WAP connection: GPRS for WAP
Secure WAP Connection: Automatic.
Go to IE - Menu - [6 Options] - Connection], cancel 'Auto Frame Measurement Setting', and select Network: Internet.
In this way, you can go to both the wap network and the www network.
-
WAP Homepage:
Port number: 9201 80
Connection type: WSP HTTP
Domain Access Point: UNIWAP
Username: Empty.
Password: Empty. MMS.
Multi-** Center:
Port number: 9201 80
Connection type: WSP HTTP
Domain Access Point: UNIWAP
Username: Empty.
Password: Empty.
-
Desktop --- Start --- Settings ---6 Connect --- **Server --- menu --- added.
1.China Mobile CMWAP
Connecting party WAP network.
Connect to a secure WAP network.
**Server.
Type wap2China Mobile Internet
Connector WAP
Connect to the Internet
**Server.
Type: http
Once you've set it up.
To the desktop Start Internet menu 6 options Connect Auto-detect settings preceded by a check mark Select Network: Secure WAP Network.
Then shut down, restart once, boot should be fine.
-
Here is a Unicom GPRS, MMS setting parameters, which is about C600 WM5.
And a lot more** instructions
-
I haven't used SP for a long time, and I can't remember how to set it up.
** of CMWAP is definitely 80
Let's look at this setting for the rest!! Just use CMWAP.
-
GPRS setup installation package for lazy people.
-
I have it on my phone too.
This one is simple.
Software (system) support, but no hardware equipment.
-
The first is to determine whether your Dopod C600 is licensed, if it is licensed, because restricted by Chinese regulations, Chinese mainland does not allow wifi function, so Dopod will have its own WiFi function module hardware shielded before leaving the factory, so there are options on management, but can not turn on the WLAN function.
-
There's no hardware for this, so just the settings are actually useless, and a dedicated C600 system can solve it.
-
It's called "sleeping to death", and I haven't encountered it, but I've heard of it for a long time.
The landlord searched for "Dopoda Sleep to Death" to see how others solved it.
Paste a paragraph casually below.
To put it simply, it is also called the system "suspended animation", and there are generally two states: in most cases, the signal of the mobile phone is very good, and the signal light is also flashing, but the other party dials his own number, and can hear the ringing, but the mobile phone has no response, however, sometimes, the PDA function can generally be used normally (in a few cases, there is no response); There is also a situation where the mobile phone cannot activate the system, press any button, the screen does not respond, this kind of situation does not appear much, most of them may be related to the installed software or installation method.
About the reason for sleeping dead,The major forums are full of opinions,Different ROMs have their own different versions of commentary,If it's a ROM problem,Although most of us can't solve it by ourselves,However,You can solve it by flashing the machine to upgrade those system versions that have been corrected。 Since all of the above problems exist objectively, what strategies and countermeasures should we adopt in terms of our capabilities?
1 First of all, there must be a stable ROM,As far as S1 is concerned,The kernel of the mobile heart machine version should be pretty good,Relatively,A lot of system versions,It's already very stable,It's also the most stable PPC mobile phone I've ever used,Some other upgraded versions,Such as 19202,19209 and other kernel ROMs,After most of the oil tests,The response is also quite good,It's also a relatively stable system。
2 Because the problem of sleeping dead is also related to the software used: for this reason, we can try to install green software, and try to avoid some conflicting software, running on the system, but randomly started software, system software, and even network tools that need to be used frequently, such as QQ, etc., need to be installed in the fuselage memory, and other software (including cab installation and PC installation) can be installed on the memory card as much as possible.
3 Developing a good operating system is the root of eliminating this kind of problem, in the final analysis, it is the human factor, artificial intervention. Since we all know that poking PP restart can solve the problem of "sleeping dead", in order to prevent problems, we can use third-party software, such as addintimer (multi-function timer), to set the system restart time every day, so that the system enters closed-loop mode and automatically restarts the cycle, which can save the trouble of manual restart. In addition, we also need to frequently close some programs that are running in the background and are no longer in use, so as to free up RAM space as much as possible.
For S1 normal friends, RAM and ROM are quite valuable, because, **The running memory required to run is about 3M, below this value, any sleep death, may happen.
The above is a little bit of my own experience sharing, and finally, I wish you all a happy game.
-
Software conflicts, if you have software installed for more than one application, it is easy to cause conflicts.
-
Who did you brush it for?
It is recommended to brush down the e-large streamlining and try it first.
If there is a ROM with integrated software, it may be a problem with the software settings.
-
This one can't be solved. Only downgraded.
-
There must be dust inside, and mine is often like this, removing the keyboard and washing it with alcohol.
-
It's hard to explain your problem, I'm using Dopod C600 now, but I don't use a digital analog stick, I suggest you restore the system, sometimes it's caused by some software errors, system stability, etc.
If you really can't use the analog joystick, the use of the joystick will not be so easy to break, if it is broken, it will be replaced, only 20 yuan.
First of all, you can't be afraid of trouble when playing smart phones, and if you are afraid of trouble, you can change to a non-smart phone with your friends, and you don't need to read the following content. >>>More
The steps to set it up are as follows:
1.Data connection settings Go to Settings Data Connection menu Connection, and delete everything in the dial-up connection, VPN connection, server connection, GPRS connection! >>>More
The easiest way,Use one-click root (it is recommended that you still use a third-party flashing tool to crack root,z4root just gives you a method,But it's all the same,That is to crack root,You can try bell pepper,Zhuo master,Brush elf,,360,Mung bean,Deep flash, etc.,,,,If it doesn't work,Try the phone crack,Kingroot,Z4root.): >>>More
You try a different version, and now the latest one is also used. >>>More
I also just bought and am researching.
1 Did you touch the keypad lock on the side of your phone The light only lasts for 60 seconds at most. >>>More