The turn signal switch pulls down, what light is on?

The turn signal switch pulls down to be the left turn signal.

The switch pull down of the car turn signal is the left turn signal of the car, and the turn signal of the car pushes up is the right turn signal of the car, which is in line with the thinking of the human body and is convenient for the operation of the owner. Think of the turn signal lever as the steering wheel of a car, with the turn signal downwards operating counterclockwise, that is, turning to the left, and the turn signal going up is operating clockwise, which means turning right. When driving on a daily basis, the function of the turn signal is very important, it can alert the surrounding vehicles and avoid collisions.

If the vehicle needs to leave the original lane, it needs to turn on the turn signal in advance, which is also the basic principle of safe driving, so be sure to master the correct use of the turn signal and not take it lightly. In particular, when the vehicle enters the roundabout, it is also necessary to turn on the turn signal to prevent the vehicle from suddenly changing lanes, and other vehicles cannot avoid it in time, resulting in accidents.

The left turn signal is on.

Turn signal method:

1. Up "right" and "left", the turn signal is basically up (clockwise) to turn right, down (counterclockwise) to turn left. This design is also in line with the human body's feelings, and more in line with the human body's operating thinking.

Second, overtaking first hit the left steering and then the right steering, according to the provisions must be overtaken from the left side, so you need to hit the left turn signal first, and after overtaking, when you want to return to the original lane, then hit the right turn signal.

3. Turn on the left light when entering the highway and the right light when leaving the highway. This is because when you enter the highway you turn left, and when you leave the highway, you turn right. In the same way, when entering the main road, use the left turn signal, and when entering the auxiliary road from the main road, use the right turn signal.

Fourth, do not use the light when entering the roundabout, and turn on the right light when leaving the roundabout. This is because you have to follow the road when entering the roundabout, so you don't need to turn on the lights, and when you leave the roundabout, you have to turn the right turn signal to warn the vehicles behind and the oncoming vehicles. This is a clear provision of the new traffic regulations, and many drivers used to use the left turn signal when entering the roundabout.

5. Use the right turn signal when parking on the side of the road, and the left turn signal when starting from the parking place. The reason is very simple, parking on the road is to turn right, so hit the right turn signal, when driving away from the road, are to turn left, so hit the left turn signal, if you are not in the right direction, it means that you are going in the wrong direction.

6. When making a U-turn, you need to hit the left turn signal. U-turns are generally to the left, so use the left turn signal. If you make a U-turn to the right, you are going backwards. The left turn signal is used to warn the vehicles behind me not to pass on my left.

7. Turn signals in advance, when preparing to turn, you should turn on the lights 10-20 seconds in advance, so that the drivers behind you have enough time to react, but sometimes you should judge how long to turn signals in advance according to road conditions and traffic conditions and vehicle speed, but generally not less than 10 seconds.

Cars in my country are all left-hand driven, so the turn signal is on the left-hand side, and pulling down must be the left light on The right-hand driving car is just the opposite, because the turn signal switch is on the right-hand side

Yes, connect the turn signal to the ON gear. In this way, when the key door is opened, the turn signal is on, and then the wire from the flash relay is connected to a normally closed relay. That's it, give a good review?

The steering light lever operates up and down to control the high and low beams of the car, and lifting up means turning on the low beams. The downward push means to turn on the high beam, after turning on the high beam, there will be a blue light icon on the dashboard that will always be on.

The turn signal on the right and left is in line with the general habits, down is the counterclockwise direction, the average person will understand it as left, up is the clockwise direction, the average person will understand it as right, and the turn signal is an important indicator light that is turned on when the motor vehicle turns, reminding the front and rear vehicles and pedestrians to pay attention, so whether it is turning, merging, overtaking, starting or stopping.

How to use the turn signal:

When a car enters or exits a roundabout, it should turn on the corresponding turn signal according to the direction of travel.

In the vehicle driving, when the traffic in this lane is not smooth, when it is necessary to change lanes, you should observe whether the adjacent lanes are free through the rearview mirror, and turn on the corresponding turn signals in advance without hindering the normal driving of vehicles in other lanes, and then change lanes.

When the car makes a U-turn, turn on the left turn signal, and pay attention to whether there is an oncoming car in front and behind the car, and then make a U-turn.

When overtaking is required on sections of the road that are not marked with a solid line in the center of the road, the left turn signal should be turned on and the horn should be honked (except on sections where honking is not permitted). If you are being overtaken, keep to the right.

When you need to pull over while driving, you should turn on the right turn signal in advance, and pay attention to the traffic dynamics behind the right side of the car, and then pull over.

When driving away from the parking place, you should turn on the left turn signal in advance and pay attention to the traffic dynamics behind the left side of the car before driving to the driving lane.

Turn signal switch, down is left steering, up is right steering. The following is an introduction to the turn signal:

Function: The turn signal is an important indicator light that is turned on when a motor vehicle is turning to alert the attention of vehicles and pedestrians in front and behind, left and right. Here are some reasons why the turn signal doesn't light up:

It is suspected that the turn signal is not lit, the light is on when the double flashes is on, and the turn signal switch is partially damaged; Individual turn signals do not light up, which is due to damage to the bulb; All the bulbs did not light up, and the turn signal fuse was damaged.

If you observe that there is a need to steer in front of you during driving, you must turn on the turn signal about 10 seconds in advance to remind the vehicle behind you to take measures in time, or slow down and stop to avoid collisions and even rear-end collisions. However, it is also best not to turn on the turn signal too long in advance, which may cause visual fatigue to the driver of the vehicle behind and cause "road rage", which is mainly up to the owner to grasp. The operation method is summarized as "up, right, bottom, left", so it is wrong to say that up, left, bottom, right.

In fact, it is not difficult, as long as the owner imagines the turn signal pole as a steering wheel, then he should turn that direction and hit the mountain shelter in that direction. The turn signal on the right and the left is in line with the general habit, down is counterclockwise, the average person will understand it as left, up is clockwise, and the average person will understand it as right.

The turn signal switch is raised upwards to the right turn signal, not the left turn signal

1. Pull down the left turn signal to turn on, lift up the right turn signal to light up, dial to the middle is closed, after the wheel is back to the right, the non-circular grinding tube is left or right, and the turn signal is automatically turned off.

2. The turn signal plays the role of a reminder to remind the surrounding cars and pedestrians.

3. Turn on the turn signal will emit flashing lights, and people nearby can avoid it in time to avoid car accidents.

As a signal light, the main function of the turn signal is to remind the surrounding vehicles in the daily driving process, and the watch wheel script indicates that you are about to drive and steer, so that other vehicles can pay attention to avoid collisions. Therefore, whether it is turning, merging, overtaking, starting, or stopping, as long as your vehicle needs to be wheeled out of the original lane, then you need to turn on the turn signal in advance, which is also the basic principle of safe driving.

In daily driving, the most likely places for car owners to ignore turn signals are included in roundabouts, from ramps to high-speed main roads, parking lots and other places, which are easy to cause accidents caused by vehicle turning and ignoring turn signals.

Answer]: B Authoritative Analysis of the Driving Test Book]:

Lifting up is the right turn signal illuminating, and pressing down is the left turn signal.

Lifting up is the right turn signal to light up, the switch is on the left side of the steering wheel, generally speaking, the downward dial is the left turn signal, and the top up is the right turn signal. Uses of turn signals:

1. The turn signal is a warning light for motor vehicles to avoid when turning to prompt vehicles and pedestrians around;

2. Turn on the turn signal, and the light flashes repeatedly to attract the attention of the surrounding people to avoid traffic accidents;

3. When driving on the road, you must develop the habit of turning your headlights and don't drive blindly.

Pull down the turn signal switch and the right turn signal will be on. 1. Pull down the left turn signal to turn on, lift up and point up only the right turn signal is on, Qin Jin dials it to the middle is closed, after the wheel is turned back, whether it is a left turn or a right turn, the turn signal is automatically turned off;

2. The turn signal plays the role of a reminder to remind the surrounding cars and pedestrians.

3. Turn on the turn signal will emit flashing lights, and people nearby can avoid it in time to avoid car accidents.

Answer]: B Authoritative Analysis of the Driving Test Book]:

Lifting up is the right turn signal illuminating, and pressing down is the left turn signal.