Midea electric water heater, the water is hot and cold, is it the problem of water pressure or the p

Twist the hot water outlet of the water heater without going through the triangle valve and mixing valve, if there is still a situation of hot and cold, it is 100% the problem of the water heater itself, which has nothing to do with voltage and water pressure.

The reasons are as follows:1unstable water pressure; 2.

The heating tube is not heated; 3.Start switch (outlet power off switch starts frequently); 4.Voltage instability; 5.

The quality of the water heater itself is not good or the quality of the shower you mentioned is not good; 5.The mixing valve is broken.

Oh, what kind of electric water heater is it, it is directly heated (i.e. hot), and the estimated household power is 7kw, right?

Replace it with electric water storage or gas as soon as possible, I personally have a suggestion that the instant heating type, the thermal power is less than 12kw and it is unrealistic to take a bath with a relatively large flow rate under different inlet water temperature conditions.

In addition: Midea's after-sales service is so understandable, if I do his work, I will say the same, because the water temperature is not constant is not a quality problem, but a problem of working principle. It is inevitable that the heating power of the instantaneous type is insufficient, resulting in the poor heating efficiency of the water (involving many formulas and experimental methods, I often study the determination of parameters such as thermal power, thermal efficiency, hot water yield, and hot water temperature rise, so I will not talk about it here.)

The fundamental way to solve the heating effect of instantaneous water heater is to increase the power of the electric heating pipe (which can also limit the amount of hot water output), the earliest 4-5kw electric heating pipe, now 6-8kw, has 10-15kw, but can China's household circuit provide such a large load?

It's still summer, and it's even more problematic in winter. When I returned to my hometown in Guizhou during the Spring Festival in 11 years, the instant heat of 7kw, the temperature of the tap water was 0 degrees, and the fifth gear (maximum power) was not enough for 20 degrees. So much for now, I hope it helps.

Is the water hot and cold when the mixing valve is adjusted, or is it hot and cold after the mixing valve stops adjusting for 30 seconds. If it is the former, it means that everything is fine, pay attention to the farther away from the mixing valve to the shower, the easier it is to get hot and cold, just adjust it slowly; If it's the latter, replace the pressure relief valve.

It's the problem of the machine, the beauty is that the advertising is good, the quality is not good, hurry up to compensate!

Is it a problem with the voltage, if not, there is a problem with the water heater.

My family is like this, the newly bought beauty, how did you solve it in the end.

It's a problem with Midea's electric water heater!

Water pressure problem: The water pressure is not enough and needs to be adjusted, or find the property personnel in the community to adjust.

Try adjusting the water heater's water output a little biter.

Check whether there is a blockage at the inlet of the water heater, and remove the foreign matter should be fine.

If the water outlet of the water heater in your home is far away from the water heater, you should check whether the cold water of the water heater is the maximum, because the tap water is not turned on to the maximum, and the water temperature at the water outlet is adjusted, and the water heater will be turned off due to insufficient flow and high key temperature.

The common hot and cold failure of water heater is because of the above four types. In addition, if there is too much scale in the water heater, it will also cause the phenomenon of hot and cold, which means that regular maintenance of the water heater at home is also a very important link, which can effectively reduce the frequent occurrence of water heater failures.

A water heater is a device that turns the temperature of cold water into hot water in a certain period of time through various physical principles. According to the different principles of the manuscript source, it can be divided into electric water heaters, gas water heaters, solar water heaters, magnetic energy water heaters, air energy water heaters, heating water heaters, etc.

Manufacture of air-conditioning part and manufacture of hot water section. In fact, these two parts are closely linked, inseparable, and must work at the same time. That is, to produce hot water and cool the kitchen at the same time. Or rather, while cooling the kitchen, it is also producing hot water.