WiFi works on mobile phones, but what happens when the connection is not available on the computer?

It's hard to say why, but I can provide a few solutions for your reference:

Disconnect and reconnect the wifi in the computer, if it doesn't work, leave the wifi unsaved and re-enter the password to connect.

Restart your computer. Restart your router.

Reinstall the wireless network card driver of the computer, it is recommended to install the original one. (The official website of the laptop is the first way to find the original driver) For desktops, you can refer to the installation software of various drivers, such as driver wizards, 360 drivers, etc.

If you have tried the above software problems and cannot solve them, consider replacing the wireless network card hardware of your computer, or buying an external wireless network card on shopping software, which is not very expensive, and the cheap one is about 40 to 50.

Wi-Fi network on the computer is not available, the general reason is the connection quality problem, or the Wi-Fi network encryption method is different, modify the router's wireless encryption mode to WPA WPA2, minimize the occlusion between the computer and the router, if this is not the case, check whether the router is turned on MAC address filtering or network access permissions, cancel these functions, in addition, check whether the router's working channel is the channel supported by the computer network card, if not, The fixed channel is the channel supported by the computer's wireless network card.

If the wifi can be used on the mobile phone, but the connection is not available on the computer, it should be caused by improper settings on the computer and need to be operated again.

You can use PC Manager to fix it and see if it can be solved.

1. Clear the DNS cache. This is mainly used in some ** situations that cannot be opened.

First, press the windows + r keys at the same time, enter cmd in the pop-up window, and press enter.

In the pop-up command prompt, enter ipconfig flushdns and press Enter.

2. Reset the winsock directory, enter netsh winsock reset in the command prompt, and press enter. After the reset is successful, restart the computer. This command is very easy to use.

Well, it's very likely to be this.,Well, the problem with the computer connection here, so you disconnect it and then reconnect it.,If it doesn't work, you can restart the computer and reconnect it If it doesn't work.,Just reinstall the network card and start it.。

The mobile phone can be used to prove that the wifi itself is fine, disconnect and reconnect on the computer to try it.

The computer needs a device with a wifi connection. Such as an external wireless wifi network card, or an internal wireless wifi network card.

If this is the case. That could be a mistake in password.

Summary. 1. If the mobile phone can't connect to the wifi, the data network connection will be automatically enabled, that is, it will automatically use the traffic to access the Internet, please try to turn off the traffic switch to see if the mobile phone can access the Internet. 2. If the first step is still OK, then you have to see if the computer can log in, if so, then it proves that it is a problem with the DNS setting of the computer, please set it in the network settings to solve the problem.

3. The wifi mobile phone can be connected to the computer is generally a problem with the computer, if there is a wired network can not be connected, there must be a problem with the IP address allocation, the reason may be that some malware installed secretly changed the IP, and it was changed to automatic, and it worked immediately. 4.If it doesn't work, you can only go to the computer repair point to repair it.

The wifi phone can be connected, but the computer cannot be connected to the wifi, and the display cannot be connected to this network.

Excuse me, but please go into more detail?

1. The data network connection will be automatically enabled when the mobile phone is not connected to the wifi, that is, it will automatically use the traffic to access the Internet, please try to turn off the traffic switch and collapse to see if the mobile phone can access the Internet. 2. If the first step is still OK, then you have to see if the computer can log in, if you can, then it proves that it is a problem with the DNS settings of the computer, please set it in the network settings to solve the problem. 3. The wifi mobile phone can not be connected to the computer is generally a problem with the computer, if the wired network can not be connected, it must be a problem with the IP address allocation, the reason may be that some malware installed secretly changed the IP, and it was changed to automatic, and it worked immediately.

4.If it doesn't work, you can only go to the computer repair point to repair it.

Summary. Hello! For you:

Reasons for not being able to connect to WiFi: 1. The security encryption settings of the user's WiFi network: If the user uses the WEP security encryption settings, it will cause the system to fail to connect to the network.

2. The system obtains the wrong IP address, resulting in the inability to access the Internet normally. 3. The computer is connected to wifi and prompts that the network cannot be connected, which may also be caused by the driver being not very compatible during the upgrade, we only need to update the driver.

The computer shows that it can't connect to this wifi phone, what is the reason?

Hello! Find out for you the reason why you can't connect to wifi:

1. The security encryption settings of the user's WiFi network: If the user uses the WEP security encryption to set up the tank, it will cause the system to fail to connect to the network. 2. The system obtains the wrong IP address, resulting in the inability to access the Internet normally.

3. The computer is connected to wifi and prompts that the network cannot be connected, which may also be caused by the driver being not very compatible during the upgrade, we only need to update the driver.

Workaround: Method.

1. Reset the Bishan WiFi hotspot setting in "Unable to connect to this network"When the error appears for the first time, click "Forget this network" to remove the network connection history from the system. Then refresh and search for the wifi network in the imitation, connect to the network again, enter the password, and try to connect. Method.

2. Restart the system and restore the configuration of the system IP addressThe default system is to automatically obtain the IP address, when the "Unable to connect to this network" appears"If the error occurs, that is, the system IP address configuration is invalid, restart the system and obtain the network IP again. Method.

3. Use the "Network troubleshooting" function to enter the network and Internet, select the first item "Internet connection" for analysis and diagnosis, help users troubleshoot, and display various repair solutions.

Open the Network and Sharing Center, click on the left "Manage Wireless Network", delete the previously connected network, that is, delete the cache file, and then connect to the wireless network, enter the password, the password must be correct.

Or log out of the computer once.