-
The bathroom is where everyone bathes, so waterproofing is particularly important. Once the waterproofing is not done well, it may bring unnecessary trouble to the surrounding neighbors, the bathroom waterproofing of the new house is far from enough, then we need to improve the waterproofing project of the bathroom ourselves, and the following will bring you the introduction of bathroom waterproof knowledge.
Skillful use of waterproofing agent Waterproofing agent is a toilet waterproofing product recommended by many people. Mainly use waterproofing agent mixed with cement mortar to do it at the base of the kitchen or bathroom, and after it is dry, then use waterproofing agent mixed with cement ash to brush a layer on the surface layer for the first time, so that the small holes produced after the first drying can be blocked, so as to play the role of waterproofing. In addition, carefully brush the roots of the pipe with waterproofing agent for better waterproofing effect.
How to do toilet waterproofing Introduction to toilet waterproofing knowledge.
Use the coil to first clean the base layer and dry the base layer, then spread the coil on the ground, and heat the coil with a spray gun, which is the gap bonding between the coil and the coil. However, the membrane is fragile, and the surface is easy to be broken by the stones when backfilling, resulting in water leakage, and it is not easy to deal with the root of the pipe.
The ground is oriented to the slope of the floor drain, cement mortar or bean stone concrete can be used, but the surface should be flat. The slope near the door is small, and the slope near the floor drain is large, so you can grasp it according to the specific situation. The ground is uneven, and it may be uneven when applying waterproof coating, or the ground is easy to crack because of unevenness, which will crack with the ground even if the waterproof paint is applied.
The pipeline passes through the root of the floor slab to strengthen the waterproofing. After the pipe root building sealing paste is sealed tightly, and the cement is smoothed and the foot pads are smoothed, the glass wire cloth reinforcement layer is 1 or 2 layers when brushing the waterproof coating. The same measures are taken near the floor drain.
Waterproof construction is a concealed project, the follow-up construction may also damage the waterproof layer, if the floor tiles have been laid, do not smash the floor tiles, with professional joint waterproof materials, all the gaps are blocked to do a good job of waterproofing. It is also suitable for waterproofing projects after the failure of the waterproof layer in the bathroom.
The above is about the relevant introduction of bathroom waterproofing, if you want to know more about the relevant information of bathroom waterproofing, please pay more attention to the decoration network, together with the decoration network will provide you with more complete, more detailed and updated information.
-
You can go to places where there is water less, and you can use waterproof glue to waterproof.
-
<>1. Isolation of the intrusion of external water It is used to isolate and prevent the intrusion and infiltration of external water sources such as rainwater, snow water, dew, and groundwater; It is partly used in the waterproofing design of the interior and exterior walls and roofs of houses. Common methods include: waterproofing of curtain wall caulking glue or liner strips, painting waterproof materials with good waterproof performance, waterproofing layer design of covered roofs, etc.
2. Avoid contact with rainwater, snow, dew and other water sources, which are very susceptible to the gravity of raindrops and the driving force generated by wind convection, and splash water sources into the house; In order to prevent water sources from intruding or attaching to the building body and gradually infiltrating; Generally, it is common to install eaves and windows with water shelter boards and wing panels; to pull away from the contact with the water source for a waterproof effect.
3. Protection against the leakage of used water The so-called use of water sources includes all domestic water, water for household appliances and equipment, as well as industrial water required for production and sewage discharged. The core construction project of waterproofing project is to ensure that the waterproof layer design of these pipelines and interior walls and floors can effectively prevent water leakage.
The design of the waterproof layer is still based on the characteristics of various water sources, the use area, the use mode and the drainage system, etc., and the waterproof planning is carried out. 4. Plan an effective drainage system Water retention accumulates somewhere, which is easy to cause water pressure to increase and increase its intrusive power; In particular, the capillary action of the building will allow water to continuously infiltrate into the room, slowly causing dampness, corrosion and water leakage. Therefore, the drainage design in the waterproofing project is to achieve the anti-blocking function by not allowing water to be trapped.
-
1. You must go swimming under the guidance of your parents (guardians). Swimming alone is the most problematic, and if your companion is not a parent (adult), it can be difficult to ensure that you will be properly rescued in case of danger.
2. Those who are physically ill should not go swimming. Patients with chronic diseases such as otitis media, heart disease, ** disease, liver and kidney disease, hypertension, epilepsy, pink eye, etc., as well as colds, fevers, mental fatigue, and physical weakness should not swim, because the above-mentioned patients participate in swimming, which is not only easy to aggravate the condition, but also prone to cramps, accidental coma, and life-threatening. People with infectious diseases are more likely to spread the disease to others.
In addition, female students are not allowed to swim during menstruation.
3. After participating in strong physical labor or strenuous exercise, you can not jump into the water immediately to swim, especially in the case of sweating and fever, you can not go into the water immediately, otherwise it is easy to cause cramps, colds, etc.
4. Polluted (poor water quality) rivers, reservoirs, places with rapids, confluences of two rivers, and rivers and lakes with drops are not suitable for swimming. Generally speaking, rivers and lakes with unknown water conditions are not suitable for swimming.
5. In bad weather such as thunderstorms, wind, sudden weather changes, etc., it is also not suitable for swimming.
The waterproofing materials of engineering waterproofing are classified as follows: >>>More
The basic function of waterproof and breathable membranes is the same: waterproof and breathable. >>>More
Characteristics of waterproof and breathable membranes:
1. Air tightness: In 2005, the National Institute of Standards and Technology (NIST) released a report entitled "Investigation on the Impact of Air Tightness of Commercial Building Envelope on HVAC (Heating, Ventilation and Air Conditioning) Energy Utilization", which showed that the use of waterproof and breathable membranes can save up to 40% of the energy cost of heating and cooling in buildings without waterproof and breathable membranes. >>>More
There are many varieties of waterproof materials, which are divided into four categories according to their main raw materials, let's take a look at which four categories they are: Asphalt waterproof materials. It is made of natural asphalt, petroleum asphalt and coal asphalt as the main raw materials, asphalt linoleum, paper tire asphalt linoleum, solvent-based and water emulsion asphalt or asphalt rubber coatings, ointment, it has the following characteristics, respectively, adhesion, plasticity, water resistance, corrosion resistance and durability. >>>More
Solvent-based coatings: There are many types of such coatings, and the quality is good, but the cost is high, the safety is poor, and the application is not very common. >>>More