Can 502 glue stick rubber and metal

502 glue is a one-component instantaneous curing adhesive synthesized by advanced production process with the addition of tackifiers, stabilizers, toughening agents, polymerization inhibitors, etc., mainly -cyanoacrylate. Cyanoacrylate is an acrolein-based resin, and when the super-adhesive is applied to the surface of an object, the solvent will evaporate, and the surface of the object or moisture from the air (more precisely, hydroxide ions formed by water) will cause the monomer to undergo a rapid anionic polymerization reaction (anionic).

polymerization) to form a long, strong chain that glues the two surfaces together.

Rubber and metal can be glued to some of it, but it is not particularly strong.

First of all, the use of 502 glue: porous and absorbent materials, metals, plastics

Rubber, wood,

Ceramic, leather.

Second, product features.

If this product is exposed, it will be catalyzed to quickly polymerize and solidify the characteristics of adhesion when exposed to a trace amount of water vapor in the air, so it is known as an instantaneous adhesive. This product is widely used in steel, non-ferrous metals, non-metallic ceramics, glass, wood and flexible materials such as rubber products, leather shoes, soft and hard plastics, etc.

Third, how to use it.

When using, first clean the rubber surface, remove the oil stain, and then apply glue on the joint surface, the amount of glue should be moderate, (each drop of glue can be coated with 8 10cm2), anastomosis the glue joint surface and appropriate force pressure, wait for a while to stick firmly. The maximum bond strength is reached within 24 hours before the adhesive can be delivered.

Fourth, security matters.

This product adheres quickly, prevents the operation of **, clothing is adhered to, this product has weak tear gas, be careful to prevent splashing into the eyes, pay attention to ventilation when using.

YH-896 glue for rubber and metal bonding.

Polyethylene is a plastic and an inactive molecule, and it is not easy to exchange heat when bonding, so 502 cannot function like it does on objects composed of other active molecules.

502 This glue will not dissolve and react with items during use, and the adhesive effect is achieved through curing. 502 glue requires heat exchange during the curing process, and the faster the curing effect, the faster the bonded items will be.

Summary. Rubber products are stuck with 502 glue, what is the way pro! Hello, glad to answer for you.

The solution to the rubber products being stuck with 502 glue is: remove it with a glue remover, which is the simplest and most direct method, which is sold in many stores, drop directly on the 502 glue, and then gently wipe it off. In addition to this method, you can also use toilet water, insulating oil, and banana water to remove it, the method is the same as above.

Does 502 glue belong to high-temperature resistant glue 502 glue is resistant to high temperatures, from some experience in our lives, we can also understand one or two: when the 502 glue handle is sticky, the most common method is to immediately call a basin of hot water, wet the towel for more than ten minutes, and the glue can be softened. From this point of view, 502 glue does not tolerate high temperatures, so the instructions for the use of 502 glue will also have the words "storage below 25 degrees".

Hope mine can help you! Do you have any other questions?

How to dissolve as quickly as possible.

Rubber products are stuck with 502 glue, what is the way pro! Hello, round hole is happy to answer for you. The rubber products are stuck with 502 glue The solution is:

Use a glue remover to remove, this is the easiest and most direct method, many stores sell it, drop directly on top of the 502 glue, and then gently wipe it off. In addition to this method, you can also use toilet water, insulating oil, and banana water to remove it, the method is the same as above. Does 502 glue belong to high-temperature resistant glue Does 502 glue withstand high temperatures, we can also understand one or two from some experiences in our lives:

When the 502 glue handle is sticky, one of the most common methods is to immediately bring a basin of plum cavity and take hot water, wet the towel for ten minutes, and the glue can be softened. From this point of view, 502 glue does not tolerate high temperatures, so the instructions for the use of 502 glue will also have the words "storage below 25 degrees". Hope mine can help you!

Do you have any other questions?

Is it OK to use alcohol?

Pro-can't alcohol can't remove 502 gum.

Hello dear, glad to ask you, can 502 glue stick rubber and metal: can 502 glue stick plastic products, rubber products, wood materials, metal materials, and leather materials, etc. In addition, 502 glue can also be used for self-bonding of non-ferrous metals, rubber, ceramics, steel, plastics and other materials or mutual bonding between materials.