What to do with 502 into the eye, what to do if the 502 glue gets into the eye

If 502 glue enters the eye, you should seek medical attention immediately and ask a professional ophthalmologist to help remove the glue.

Generally, rinsing has no effect, and it is not recommended to use chemicals to melt 502 glue or forcibly scrape it off the eye, otherwise it is easy to aggravate the ocular surface damage or even secondary infection.

Because the glue solidifies quickly when it enters the eye and will adhere to the surface of the cornea or conjunctiva, it is necessary to carefully remove it under topical anesthesia and then apply ofloxacin ophthalmic ointment to prevent infection.

502 glue is a kind of quick-setting glue, once it enters the eye, it will quickly solidify on the surface of the cornea or conjunctiva, thus forming an induration, which will cause the eye to have a very obvious foreign body sensation, or the feeling of eye grinding. In this case, it is recommended to go to the hospital as soon as possible and remove the solidified glue under the slit lamp to reduce or eliminate the foreign body sensation in the eye and avoid damage to the corneal epithelial tissue. Therefore, after accidentally dripping 502 glue into the eye, you need to go to a regular hospital as soon as possible, only in this way can you avoid more serious damage.

If damage to the corneal epithelium has already occurred, antibiotic eye drops may be used to prevent local infection, or corneal repair drugs may be used to promote corneal epithelial healing. It is recommended that you go to the ophthalmology department of the hospital for an examination, if there is a cornea, it should be removed in time, after removal, use Tobais eye drops, ofloxacin eye gel, pay attention to rest, do not stay up late, do not overuse your eyes, try not to look at mobile phones, computers, television, etc.

Recently, a 3-year-old boy in Anhui accidentally dripped 502 glue bought by his father as eye drops while playing, and almost caused an accident. It is reported that the child was immediately sent to the hospital by his family after putting 502 drops into his eye, and there is no major problem. The doctor said that if you accidentally get 502 glue into your eyes, don't be nervous, rinse it with water first, and then go to the hospital for treatment.

It is reported that some time ago, Xiaojie's father found that the corners of the furniture at home were cracked, so he bought a bottle of 502 glue and prepared to stick it himself. At about 3:10 p.m. the day before yesterday, Dad took out 502 glue, cut a large hole at the mouth of the bottle, poured out the glue and began to stick to the furniture. At that time, Xiaojie was playing next to his father.

When 502 glue accidentally dripped into the eye.

Seeing that his father put the glue on the small table beside him, Xiaojie stepped forward, without saying a word, reached out and took the glue, and poured it into his eyes in imitation of the way adults usually drop eye drops. Soon, the glue completely glued Xiaojie's left eye. With a "wow", Xiaojie cried and shouted "eye pain".

Xiaojie's parents then immediately sent the child to the hospital, where he received **. Fortunately, after examination, Xiaojie's cornea was only corroded and slightly damaged, as long as it was not infected within 24 hours, there was basically no impact on vision.

What should I do if 502 glue accidentally gets into my eyes?

Ophthalmologists said that not much glue can generally be rinsed with a large amount of water, and if possible, it can be rinsed with normal saline, and normal saline is generally available in pharmacies. If there is adhesion to the cornea, it is best to go to the hospital to remove it with a needle, and the other is to drop anti-inflammatory eye drops**, such as tobramycin eye drops. If you don't have time to go to the hospital, you can take a clean cool boiled water with a small amount of salt nearby, rinse it in large quantities, and dilute the harmful substances to the lowest concentration.

502 glue into the eyes can be rinsed with water first, and finally rinsed with a large amount of warm water, if slightly stuck to the surface of the cornea, can be removed with a gentle scrape, drop to promote corneal epithelial growth of the potion, but in the case of too much 502 glue, it is best to go to the hospital for **, to avoid hurting the eyes.

When the glue gets into the eyes, you can wash it with water first, and then rinse it with a lot of warm water, so that the solidified glue can be softened and diluted, and discharged in the eyes.

If there is still discomfort after the eye irrigation is completed, you need to go to the hospital for cherry blossom or treatment in time, after all, the eye is more important and fragile, and professional diagnosis and treatment can greatly avoid 502 glue from harming the eyes.

502 glue into the eye, may be slightly stuck to the surface of the cornea, a gentle scraping to remove it, and then drop a few drops to promote the growth of the corneal epithelium can be repaired, but for the amount of 502 glue that is too old and carryed, it is best to go to the hospital after rinsing**.

1. Rinse with water in time

If 502 gets into your eyes, rinse it with water immediately and flush off most of the 502 glue.

2. Rinse with warm water

After the tap water is flushed, there is warm water to rinse, which means that the glue that is about to condense can be diluted with warm water.

3. Wash your eyes with soap

No matter how much you rinse, there may still be residual glue, so wash it with soap.

4. Rinse your eyes with warm water

After washing with soap, rinse with warm water.

5. Seek medical attention: If you are not at ease or your eyes are uncomfortable, then seek medical attention immediately.

Rinse repeatedly with medical saline, and then use some anti-inflammatory eye drops to prevent infection.

Rinse quickly with plenty of water, constantly inverting the eyelids during the rinse.

502 glue is a kind of quick-setting agent, splashed into the eye should be immediately rinsed with a large amount of water, during the rinsing process to constantly reverse the eyelids, while turning the eyeball in all directions, to ensure that the 502 glue into the eye as much as possible. Even if there is a residue in the eye, because the eye secretes tears, 502 glue only forms a thin layer of translucent film on the surface of the cornea (black eyeball) after coagulation in the eye, and it has poor adhesion to the cornea, which can be removed with a sterile wet cotton swab lightly, so there is no need to panic. Because 502 glue contains a weak acid, it has a certain amount of damage to the cornea, which makes people feel eye pain and foreign body sensation (as you said: eye pain).

Immediately, the wind oil essence eye wash was saved, or surgery was required to remove the foreign body.

Wash immediately with hot water or acetone, and need to go to the ophthalmologist to give the conjunctival sac irrigation and wipe with a cotton swab. The slit lamp observes the condition of the cornea and removes glue residue. Antibiotic eye drops are given.

If you don't have time to go to the hospital, hurry up and take a clean cool boiled water with a small amount of salt, rinse it in large quantities, and dilute the harmful substances to the lowest concentration. If you go to the hospital like this, you will be more active.

Then an antibiotic eye drop is sufficient.

Go to an ophthalmologist for treatment, mild, can be separated, massaged.

If the adhesion area is large, it can be surgically separated in the outpatient setting, and the effect is quite good.

If there is no splash into the cornea, it generally does not affect vision, and the operation is good, it will not be **, and it will not leave a trace.

Immediate rinsing with topical antibiotic eye drops is required. If you have persistent fatigue, foreign body sensation, soreness, etc., it is recommended to go to the hospital for treatment, if the treatment is not thorough, the foreign body will remain in the eye, and it will cause symptoms such as eye inflammation.

When 502 glue splashes in your eyes, don't panic and don't rub your eyes with your hands, it will hurt the eye mask. Instead, start with some salt water, soak the salt water in a cotton swab, and gently apply 502 glue to the splashed eye. Then turn your eyes.

The aim is to soften the brine.

Cut your eyes with glue to prevent hardening, then go to a nearby hospital**. Your doctor will give you further tests. Don't worry about the effect of glue on your eyes.

I've experienced this before, and when I was splashed on the ground, my eyeballs couldn't move. Then came to the hospital.

The doctor also applies some saline to the eyes, even without taking medicine, as long as you often apply some saline to the spilled eyes, like this.

The glue will fall off layer by layer. For the next month, my vision was a little blurry and I couldn't see clearly. After about two or three minutes, vision slowly returns to normal.

502 glue is a quick-setting agent. If it gets into your eyes, you should immediately rinse it with plenty of water. During the irrigation process, the eyelids should be continuously flipped and the eyeballs should be rotated in all directions at the same time to ensure that as much of the 502 glue that enters the eye is rinsed off as much as possible.

Even if there is residue in the eye, after 502 glue cures in the eye, it forms a translucent film on the surface of the cornea (black eyeball) because the eye secretes tears. It has poor adhesion to the cornea. It can be gently wiped with a sterile wet cotton swab without panicking.

At this point, only eye drops that promote corneal healing can be completely **. I wish you a speedy **.

It is best not to dispose of the glue in the eyes by yourself, you can wipe off the glue from the eyes first, and then go to the hospital for effective and correct treatment.

You can use some cotton balls dipped in salt water and gently apply it to prevent 502 from aging.

You can quickly flush this with cold water and go to the hospital as soon as possible.

Rinse with plenty of water, and then go to the hospital in time.

You can use some cotton balls to dip in salt water, and the doctor will deal with it for you.

Don't rub your eyes with your hands, wash them with salt water and go to the hospital.

Do not rub your eyes, wash them with warm water in time, and seek medical attention in time.

The best way to do first aid is to wash it with clean water and then rush it to the hospital.

The best first aid method is to rinse with water and try not to rub your eyes with your hands.

The best way to do this is to go to the hospital and the doctor will take care of it.

We should all be no strangers to 502 glue, at home, glue is often used, and 502 with its super adhesion, often becomes our first choice. But when 502 glue brings convenience, sometimes it will stick to things that you don't want to stick because you are not careful, what are the ways to remove it?

1. Use banana water to drop on the glue stains, and at the same time use an old toothbrush to stir constantly, wait for the glue stains to become soft and take off, then rinse with water, rinse repeatedly, and continue to scrub until it is completely clean. Put an absorbent cloth on the back of the garment with glue marks, then apply some white vinegar to the glue marks, and finally scrub it clean with cotton dipped in water.

2. Drop 502 glue on the original place to melt the original 502, and then quickly wash it off with water.

3. With insulating oil, pour some insulating oil in the transformer on the table, at this time, the 502 glue will soon become very soft, so that it can be rubbed off quickly.

Glue is essentially a resin glue, as long as an organic solvent that dissolves the resin, such as acetone, is used. However, acetone is toxic if inhaled, so pay attention to how to use it, and you can stuff the adhesive part into the bottle. It is said that if you freeze it in the refrigerator, the glue will fall off, so you can try it first.

5. Stick 502 glue on a small area, as long as you soak it in hot water, if you stain a large area with 502 glue, coat it with acetone, and wait about 5 10 minutes to remove it.

So, what do we do when 502 glue accidentally goes in our eyes?

First of all, you need to stay calm and immediately run to rinse your eyes with water. When you feel that there is still 502 glue left in your eyes and it is not fully rinsed out, you must remember not to rub your eyes with your hands and force the residual 502 glue to flow out. At this point, the 502 glue should adhere to the eye, so you can switch to saline for rinsing.

Secondly, 502 glue has a certain degree of corrosiveness, when it remains in the eye and adheres to the eye membrane, it is necessary to pay attention to observe whether the eye membrane is congested, edema and other abnormal conditions. If only a small amount of 502 glue enters the eye and is rinsed in time, only a small amount of glue remains in the eye, and there is no congestion, redness and swelling and other abnormalities, you can go to the pharmacy by yourself and consult a pharmacist to prescribe some antibiotic eye drops for sterilization, disinfection, and prevention of complications such as infection. If a large amount of 502 glue enters the eye, and water rinsing, normal saline rinsing, antibiotic drops and other measures are ineffective, it should be sent to the hospital in time for symptomatic treatment to avoid unnecessary diseases.

Although 502 glue is very beneficial for some things in daily life, it is also necessary to pay attention to its use to avoid 502 glue sticking to unnecessary places, and to be careful that 502 glue touches the body and enters the eyes or lips and other body parts. Especially in ordinary life, 502 glue should be put out of the reach of children, because children's cognition is not very perfect, for this kind of item, there is no certain understanding, parents should pay attention to it.

I majored in interior design in college, so to speak, we are also art students, because we have to learn to draw, do handicrafts, draw drawings, design small works, etc., each semester will have a week-long internship time, that year is the first semester of the sophomore year, we were arranged to do handicrafts, design small works, and then design works in the dormitory, our dormitory is to make an architectural model, is a miniature version of our school, in which we need to measure the size, and then draw it according to the proportion, and then find the template, carving, It was cut to look like a school building and then glued together with 502 glue.

The previous process was relatively smooth, but, the last bonding link had an accident, the big-eyed beauty in Langfang, our dormitory, said this, directly cut the head of 502 with a knife, and then used too much force, sprayed it directly, sprayed it on the hair, eyes and face, at that time I heard her scream, we didn't know what to do, directly pulled her to the bathroom and rinsed, there was no in the eyes, but the eyelashes are still sticky, and the hair can't be removed, Later, I went to the hospital near the school and handed it over to the doctor to deal with, but fortunately, there was no danger, which scared us all, so for unnecessary trouble, we must be careful when opening the 502 glue and protect ourselves! If you can't handle it, go to the hospital as soon as possible, don't drag it, otherwise the glue will corrode your eyes, and the drier it is, the harder it will be to clean!