-
If it is a small place, the regular printing factory will do what ISO and other documents It will cost tens of thousands of dollars The import of the folding machine is not expensive now, about 10w, and it is an automatic folding machine, you are not good at controlling the position, it is recommended to use automatic.
All the printing processes, I can introduce you now, our company is relatively large in the printing industry.
First of all, it is divided into ordinary machine, UV machine (rotary machine), color printing machine (large color printing, small color printing), screen printing (silk screen printing).
Generally, it takes many steps to print a product: for example, a label
If it's simple, you can do it directly with an ordinary machine or a UV machine.
1 Computer Department out of the film (out of the knife mold line to do the knife mold).
2 Editions of the room to be published.
3. Direct printing by ordinary UV machine (of course, peritoneum and beer cutting are integrated).
4 IQC inspection can be shipped.
If it's a large color print, like the kind of instruction manual you said.
1 2 steps are the same.
3 large color printing.
4. If the sheet can be cut directly (paper cutter), if you need to fold the page, then go to the folding machine to fold, if you need to bind, you need to ride the binding, and if you need to bind the card, you need to bind the machine.
The above is just an introduction to the process, like you said, I suggest you buy a riding machine, I think you should not have much, of course, the machine is more expensive, our company is imported, more than 300w, domestic should be dozens of w
The UV machine is also very good, it can pick up some simple labels to print, and the machine is not expensive, and the profit is relatively high.
-
Printing points, prepress. Printing. Postpress. These 3 categories.
There's also gravure printing in between. Letterpress printing. Offset. Offset press. Something.
The machines needed are all counted as "Riding Nail", "Varnishing Machine", "Laminating Machine", "Printing Machine", "Paper Cutting Machine", "Hot Ironing Machine" and so on. It's up to you to make that kind of finished product. The machine that is needed to do that work is different.
I'm really interested in that. I recommend you go to the Print Expo. There's everything there, there's that brand.
-
I'll tell you that it's best to open a post-production factory, such as a peritoneal or cutting factory or a monochrome printing factory, the risk is lower than that of the binding factory, the color printing factory, the cost is low, and the risk is small!
-
Absolutely! Because engaging in a second-hand phone is a business issue and a business operation, if you are not very clear about the process of using the printing press. In fact, it itself has little to do with buying and selling second-hand printing presses.
However, it should be noted that at first glance, the printing press has a lot of buttons, which seems to be difficult. But in fact, its operation is really very simple, you only need to find a person who knows how to operate to ask him, and you can definitely touch him thoroughly in half a day. Because after you understand it, you can sell your stuff to your customers.
Because you know what's good, what's bad, what's the advantage? What's the disadvantage, right?
-
Plate binding, sample reading, inking, occasionally helping with paper loading, arranging third-hand work, etc.
-
It depends on how big the company is, what kind of machine is generally not proficient, it is the ink, the washing machine, the paper moving, and any work will greet you, and if you are proficient, you can do some things independently, and it is basically the same as the captain, but the captain still has to see when things come out.
-
What kind of printing press are you? There are also some printing machines in our factory that are idle.
-
The printing secretary is China's first printing software that is completely free of charge for people in the advertising printing industry. Printing**The little secretary does not need to enter words, does not need to use calculators, does not need to calculate formulas, and does not need to type**, and knows the printing of many local printing houses in a few seconds**. The small secretary of printing integrates the parameter settings of printers across the country, and uses a new "cloud computing" network technology to subvert the traditional printing model, change the traditional business channels, and lead printing enterprises to e-commerce.
As the first free printing software in the industry, the little secretary of printing solves the troubles of people in the advertising and printing industry about printing, and is a necessary business helper for people in the advertising and printing industry!
-
It depends on what printer you use, whether it is an inkjet or a laser printer, the longest inkjet printer is the problem of the printhead, here to remind you to buy a printer or buy a new one, because the printer is a consumable, second-hand printers are best not to, do not be greedy, so as not to lose more than you gain.
-
Before and after the shift, the operator must wipe the work, wipe the oil and ink inside and outside the fuselage, remove the waste paper and sundries in the machine, and often maintain the original color of the equipment and no rust.
The cylinder is one of the main parts of the printing machine, and it must be wiped at any time in each shift to keep the surface of the cylinder clean, especially the cleaning of the embossing cylinder.
Most of the parts of the paper feeding machine are exposed, and the oil stain and paper powder on the surface of the parts must be wiped off every shift to reduce the friction of each machine.
The motor and air pump of each part of the printing machine should keep its surface clean and dry to prevent accidents caused by poor heat dissipation.
When wiping the equipment, all parts of the oil eye, oil circuit, refueling device, and parts should be thoroughly and carefully inspected. If there is any omission of refueling, oil circuit blockage, damage to the refueling device, loose screws, falling off, etc., refueling and maintenance should be done in time (especially the spindle and the two ends of the stamping cylinder gripper tooth shaft, do not forget to refuel).
It is strictly forbidden to use broken cotton yarn and rags to wipe the equipment to prevent it from falling into the machine and causing accidents.
When the equipment is not in use during holidays, the ink roller must be scrubbed to prevent the ink from drying and solidifying, which will affect the performance and service life of the rubber roller.
In the daily production process, the equipment should be kept clean frequently, so that the ground is free of oil stains, water traces, waste paper and sundries.
-
It is still recommended to buy imported second-hand phones.
It is more durable than many of the current domestic new ones.
-
The machine cannot be judged by how new it is, but by how many prints it has been printed and how many years it has been used. to estimate the fineness of the machine. Secondly, when buying a second-hand machine, first of all, look at whether the embossing cylinder is hard and whether there is wear and corrosion at both ends of the cylinder.
Then it is to see whether there is an ink bar on the printing flat net, first to see if it can be adjusted well, or whether the base of the ink stick is seriously worn. Then look at the overprint, the 2 colors are printed, and then print again to see if the double lines overlap. It is also necessary to print two colors first, then print the upper group of monochrome or then print the next group of monochrome.
See if it's accurate. There is also a look at the electrical aspect. (Note the points!!
-
At a glance, you can tell that it is a blind question, and there is no need to import it. If you were going to import this thing, you wouldn't ask that. Find a professional for you to get it, you can't play it yourself, and you have a specialization in the art industry.
-
The Inspection and Quarantine Bureau has requirements, and it seems that it cannot be recorded, so it cannot be imported.
This can only be reduced, not deleted, because the energy conversion can not be 100%, there must be a part of the energy converted into waste heat, then there needs to be a device to transfer the generated waste heat, otherwise the system can not operate. On how to reduce the energy loss of thermal power plants, first of all, we need to know the working principle of thermal power plants, the water in the condensing tower is treated and sent to the boiler for heating after being pressurized by the water pump, turning into high-pressure and high-temperature steam, and then flowing to the steam turbine, so that the steam turbine rotates and drives the generator to spin electricity, and the steam flowing out of the steam turbine becomes low-pressure and low-temperature, and is sent to the condensing tower to condense into water. There is a problem here is that the steam temperature of the outflow turbine is still higher than the temperature of the condensing tower, and this high-energy steam is sent to the condensing tower to condense into water, which is simply a waste of energy.
6600 detailed evaluation.
6131 Assessment. >>>More
idsl + 2gtf + flashcard = 850
This ** suits. >>>More
There is a model article on this website.
In fact, you can go to Jincheng second-hand excavator market to have a look. His regular company. There are samples. >>>More
Set up an iCloud account (generally use the same account as the ID, you can also set it separately) Click on the email, contacts, calendars, reminders and other data you want to automatically back up to iCloud, here is a special reminder that you must click on "Find My iPhone", so that even if someone else steals or picks up your iPhone, it can't be used, and you can only disassemble the parts and sell them. **Open,There are "My**Stream", "**Sharing" two items below, if you turn on "**Stream", when your iPhone is connected to WiFi, it will automatically upload a new ** and send it to all devices logged in to your iCloud account. For example, you go to the park to play today, take some photos with your iPhone, you have another iPad, and this iPhone is with the same iCloud account, the iPad is at home, there is wifi at home, when you return to the company from the park, if the iPhone is connected to wifi, then all the ** you just took pictures in the park will be automatically synced to the ipad at home, so when you have privacy needs, don't turn on "my** stream", otherwise your**will" Live". >>>More