-
Here's a right one for you:
If you want to install XP in a new way, and install it with a virtual optical drive, that's not possible! Reason: Run setup with a virtual optical drive, when the new installation is new, we think that your current XP system has put part of the installation file into the C disk, but after a restart, you have no system, how to load the virtual optical drive driver and how to use the virtual optical drive?
Because I think that the system copies the installation file into your C disk, then you also need to use an XP CD! The way downstairs is to install the virtual optical drive ghost,That's another thing,The system doesn't need to start,PE system can pour the ghost disk image into your computer,That's 10 minutes to get it。
So, if you want to install it completely new, and you don't need to install it with an optical drive, there is also a way:
Floppy drive boot, USB flash drive boot and disc boot to DOS state. In this way, you need to make a windows 98 system disc (your local disk should be in FAT32 format, otherwise you also need to load the NTFS support program, which is very troublesome), and then run the disk buffer program (this file is available in the windows98 system), otherwise it will be very slow and slow.
Then go into your computer disk, copy down the XP system installation folder, enter the i386 directory, run, and then just wait! Remember to load, or you might have to wait a day.
Doing a clean install of a hard drive can seem a bit difficult, but if you've installed Windows 98 with a boot floppy disk, it's not that hard.
Either you can ghost the system into your computer under DOS or PE. This is the most trouble-free fool's errand.
-
I used the hard disk installation "ghostxpsp3 quick installation professional version of the PE environment virtual optical drive installation up to 10 minutes。
Soon my windows only go two grids, before using tomato garden sp2 to four or five grids up and down the system and installation method !! I found it all on the Internet) no, I will pass you the installation method!
You have to go down the system yourself, it's too big to pass it, and it's very convenient to go to the deep home page.
-
PE itself is a micro system, you can first use DM and other tools to block the hard disk, and then enter PE to copy the ghost version of the XP package directly to the hard disk, restart and use ghost to read the ghost image on the hard disk. ok
bs downstairs The deep homepage has been closed early, and the tomato garden house has been copied, who dares to open it.
-
Summary. Hello, I have seen your question and am sorting out the answer, please wait a while
It doesn't match the question I asked. No.
-
The steps to install the system with PE are: use the U Depth U disk boot disk maker to make a boot U disk ghostwin7 system image file.
Step 1: Complete the U depth U disk boot disk.
Step 3: Change the electric circle trapped Sun Brain mode to ahci mode, otherwise the win7 system will appear blue screen after the installation is completed.
1) Formal installation steps: U depth U disk boot disk connected to the computer, after restart, press the start shortcut key when the boot interface appears, wait for the system to enter the ruler u depth main menu, select and run U depth win8pe installation maintenance version (new machine), enter key to confirm.
2) After the orange chain enters the PE system, it will pop up the system installation tool that comes with the PE system"U Depth PE Mounting Tool", click"Browse"Select the win7 system image file stored in the USB flash drive, the installation tool will automatically load the installation file required for the system image package, we just need to select the installed disk partition, and then click"OK"Keystroke.
3) Do not modify the pop-up prompt window, press it directly"OK"Can.
4) After waiting for the disk to complete the formatting, the win7 image file will be installed.
5) After completing the above operations, you only need to restart the computer for subsequent installation, and you can enter the win7 system after completing the subsequent settings.
-
1. After entering PE, select the ISO system file in the USB flash drive. Right-click on it and select Load as Virtual Disk.
2. After clicking in, click OK to mount successfully.
3. After the mount is successful, go to the desktop and open the Windows installer.
4. The first one is to select the image file, go to the virtual disk that has just been mounted, find sources, and click in.
5. After entering, you can see it, select it and click OK.
6. The second one can select the system disk to be installed on, and the default is generally C disk.
7. The third option is also to select the disk to be installed, which is generally the C disk.
8. After all the selections are made, click to start the installation.
9. Click OK again, and wait until the progress bar below is full to restart the computer. The computer system is installed.
-
Be patient.
If you have a question, you can know that you can ask a question, and it is recommended to bring **.
-
Yes. If you enter PE, you can do whatever you want with the system. It is recommended to put the system installation package on the hard disk to perform the installation.
-
Entering PE is also to use "kill him" to find the system files in the USB disk and install it.
-
Computer reinstallation system Use U disk PE installation system.
-
How is the USB flash drive PE system made? Learn to install the system for minutes, and no longer ask for help.
-
In the CD or USB disk installation option, you choose PE to start After entering PE, there is an option to select the installation system.
-
I found you a ** explanation. Look at it.
-
Here's a portal for you, here are the steps you want The post source is from the deep forum.
Memory, chips.
Upgrade the memory, the speed is more obvious. >>>More
The slow boot may be due to too many loaders, which can be solved with msconfig, click Start Run msconfig to clear the startup items. >>>More
Under normal circumstances, the manufacturer's computer will give you a system backup, that is to say, your one-click restore can be used under normal circumstances, and you must make a backup of the desktop document before restoring to prevent file loss. If it doesn't work, you can contact the dealer to see if the computer is still in service time, if it is free to install the system, if not, it will require a system installation fee ranging from 30 yuan. But I suggest that you should buy a system disk, learn to install it yourself, or ** a mirror yourself, etc., there are a lot of things on the Internet, you can achieve it, you try it.
When installing the system, there is an item for installing partitions. The default is the C drive, have you changed it or are you mistaken? >>>More
Hello. i386 installation system refers to the use of hard disk under DOS to install the system, mainly refers to the installation of XP, Win7 has not supported DOS hard disk installation, **XP original image, decompress to the directory of other partitions, use the U disk or CD boot disk with into the pure DOS environment to guide the computer into DOS, go to the i386 directory under the command prompt, and then run the winnt in it, exe to start the hard disk installation XPOther steps are the same as using the original CD to install XP.,Don't talk about it here.,Follow the prompts to go through the whole process.,XP operating system is installed.,I wish you a smooth ride.,If it helps.,I hope it's timely.。