How to type the symbols on the laptop keyboard

Method 1: Press and hold the shift key of your keyboard.

Then press the number "2" key at the top of the keyboard to type "@".'Symbol. Not only that, but a row of number keys above the keyboard 0 9 above the special symbol.

It's all typed out this way. It should be noted that some input methods are not supported.

Method 2: With the keypad on, press and hold the Alt key.

Enter 64 in the keypad and release the Alt key.

To type the dot symbol on the computer, you can directly press the keys on the keyboard, or use special symbol input and soft keyboard input, and you can also type the dot symbol by typing dian or jgh with input method. The steps are as follows:

1. Keys on the keyboard: This method is the simplest, just convert the input method on the computer into the input state of Chinese, and then press the [ ] key in the upper left corner of the keyboard. This key is located below the esc key, before the number key 1;

2. Special symbol input: There are many input methods that can input special symbols, select [Special Symbols] in the right-click menu in the status bar of the input method, find the [spacer], click to enter;

3. You can also use the pinyin of directly entering [jiangefu] on the input method, in addition to displaying Chinese, the corresponding symbol will also be displayed, and the pinyin of entering [dian] will also be displayed in the input method;

4. You can also open the soft keyboard of the input method, and continue to click to select [Punctuation]. At this time, the soft keyboard will appear on the computer desktop, and we see that the number key 9 is a dot, at this time, as long as you press the 9 key on the keyboard or click the 9 key on the soft keyboard with the mouse, you can enter this point.

Fault 1: Some letters are typed out of numbers, resulting in inability to type.

This situation is because we accidentally switched the integration mode of the letter and numeric keypad to the numeric mode, at this time we will find that the letter on the right is typed out of the number, this situation is because we have turned on the numeric keypad, the solution is very simple, press the fn+num key combination to switch back.

Fault 2: The notebook input method cannot be switched, or the switching input method is stuck.

There are often netizens who encounter the phenomenon of opening the browser,Switching input methods is stuck,In fact, this phenomenon is a typical input method and input method or other application conflicts。 Because the input method that comes with Windows is not very easy to use, so many friends will choose to install Sogou, or search and other input methods, but it should be noted that most of the domestic Internet giants only care about their own interests, and do not consider compatibility with some other competing input method software, so if you install multiple popular input methods may cause conflicts between input methods, resulting in conflicts between input methods that are often switched.

You can enter the control panel to find the language and then the text and input language options, find the input method settings, and enter the following interface, you can delete some input methods that are not commonly used, as shown in the following figure:

Fault 3: The laptop keyboard is malfunctioning.

Notebook keyboard is actually more prone to failure, especially water or knocking for too long may also lead to damage to the notebook keyboard, generally the notebook keyboard is broken, some keys fail, for such problems it is recommended that you use an external keyboard, because the notebook replacement keyboard is very expensive, so it is not recommended to replace, you can also use the system's own screen keyboard, the opening method is: start - program - accessories - auxiliary tools - screen keyboard - open it.

How to input special symbols and punctuation marks on a computer keyboard:

In Chinese, we press the shift key + the number area in the main keyboard area on the keyboard, and you can enter from left to right from left to right: ! #￥%…Symbol.

If you enter the @, and the symbol is pressed and held in Chinese, you can enter the @, symbol.

For example, if you enter a symbol such as $, you can enter the $ symbol by holding down the shift and key in English.

Input: In Chinese, you can enter shift+the corresponding key: ,".

In Chinese, press the button on the keyboard; ', key, input; ', punctuation.

How to play common symbols:

1. Semicolon (; Directly click, there is a draw icon on the keyboard.

2. Full stop (。 Direct point.

3. Book title number (""Hold down the shift key and click the two keys in front of the question mark.

4. Double quotation marks (" Hold down the shift key and click the ( in front of the enter key") key.

5. Dash (- hold down the key in front of the shift key (=).

6. Vertical bar (|Hold down the shift key to delete the key in front of the (backspace) key.

7. Ellipsis (......Hold down the shift key and the number key (6).

8. Exclamation mark (!) Hold down the shift key and the number key (1).

Common punctuation.

Semicolon (,) Title number (《》Double quotation marks (" Single quotation marks (' Dash ( - vertical bar (|.)Ellipsis (......Exclamation mark (!) Plus (+) Minus (-) Question mark (?) colon (:) percent (%), etc.

1.How to input special symbols and punctuation marks on a computer keyboard:

In Chinese, we press the shift key + the number area in the main keyboard area on the keyboard, and you can enter from left to right from left to right: ! #￥%…Symbol.

2.If you enter the @, and the symbol is pressed and held in Chinese, you can enter the @, symbol.

3.For example, if you enter a symbol such as $, you can enter the $ symbol by holding down the shift and key in English.

4.Input: In Chinese, you can enter shift+the corresponding key: ,".

5.In Chinese, press the button on the keyboard; ', key, input; ', punctuation.

For example, those symbols on a computer keyboard.

A question mark, a comma, or an exclamation mark.

You can press the upper gear key, which is shift. Then press the corresponding symbol button.

So that you can play it out.

How to play the existing symbols on the keyboard (1) There are two symbols on a key on the keyboard.

First, bring up the input method and right-click the icon position of the input method. 2.Open the options menu and click to select the "Soft Keyboard" option.

3.In the drop-down options menu of the Soft Keyboard, select the Special Symbols option. 4.

A soft keyboard that calls out special symbols, which corresponds to the input keys of the computer keyboard, and can realize the keyboard input of special symbols through the correspondence.

To type a keyboard symbol on your computer, you can use the NCTRL key with your left hand and then press the symbol key.

Computer keyboard symbols need to be held down by the Ctrl key and then the symbol key at the same time.

For computer keyboards, you can press the shirt key and then press the punctuation key.

The symbols of the computer keyboard can be selected to insert in the document, and the selection symbol can be selected to select special symbols.

Do you know how to enter symbols on the computer with a keyboard, in a few simple steps, it is easy to complete.

Details are as follows:

1.Press and hold the shift key of the keyboard, then press the number "2" key above the keyboard to type "@符号.

2.With the help of Sogou input method, the specific steps are as follows:

3.With the help of the shortcut key is Ctrl+Shift+O, open the Sogou Toolbox.

4.Find the "Symbol Collection" in the "Sogou Toolbox".

Press the main shift key and look for the keys marked with these symbols on the keyboard.

1. Semicolon (; l;

2. Full stop (。 Directly click on the symbol in front of the question mark key;

3. The title number of the book ("》Press and hold the upper key and click the two keys in front of the question mark;

4. Double quotation marks (" Press and hold the upper gear key and click the ( in front of the enter key.)") key.

5. Single quotation marks (' directly click on the ( in front of the enter key") key.

6. Dash (——Press and hold the key in front of the upper gear key point (=);

7. Vertical bar (|) Press and hold the upper key, click the key in front of the delete key (backspace key);

8. Ellipsis (......Press and hold the upper key and tap the number key (6);

9. Exclamation mark (!) Press and hold the upper key and tap the number key (1);

10. The symbols of the keyboard are mainly concentrated in the upper number keys, and the symbols can be entered by using the [shift] key + number key. There are also some third-party input methods with sign shortcut input,For example, Sogou Pinyin method can be input V1 to V9There are a large number of punctuation marks that can be used,Smart ABC,Press V and press 1 to find the symbol。

Open the Chinese input method, in the Chinese punctuation mode, "shift+," enter "symbols", "shift+." "Input" >> "Note must be in Chinese punctuation mode.

Hope mine is helpful to you.

Where you need to type, turn on the English input status, then hold down the shift key, and then press the : key.

You can use the input method tool to open the symbol encyclopedia to enter.

The specific steps are as follows:1、Click the notepad that needs to be entered and issued,Press and hold shift and ctrl at the same time to pop up the selection interface of Sogou input method。 2. Select the special symbol in the input method and click to use it.

3. The bottom is some commonly used symbols, and the top is the most recently used symbol, which can be used by clicking.

Special SymbolsSpecial symbols are real text and can be copied and pasted into text, such as mathematical symbols, unit symbols, tabs, etc.

How do you type punctuation marks on the keyboard? Here's how:

1. There are some keys in the left half of the keyboard, there are 2 characters on one key, hold shift, you can type the above characters, for example, hold shift and 5 to type %.

2. There are also some keys on the right, which are also two functions on the key, but these functions may not be able to type characters.

3. Press the numlock key to switch the upper and lower symbols of the keypad, and the following keys can not enter characters, but some function keys.

4. When switching, the leftmost one of the 3 lights will be on or off, and the keypad can type numbers when it is on, and it is the function key when it is off.

That's all for it, go ahead and give it a try.

The steps to type out computer symbols on the keyboard are as follows: Blind Boy

Computer: Lenovo Legion Y700

System scum: windows10

Software: WPS2019

1. Some of the number keys on the keyboard and the buttons on the right side of the letters can be combined with shift groups such as large keys to make punctuation marks.

2. For example, press and hold shift+number key 6 to type ellipsis in the Chinese input method, and press 9 to open the parentheses.

3. In addition to using the shortcut key of shift, you can also use the alt+number key combination to realize the input of symbols, for example, using alt+41457, you can play a solid circle, alt+41460 to play a solid square, and alt+0178 to play a square.

Symbol type.

It is a conventional social communication tool, and its representation is language. Under normal circumstances, the parties to the teaching use of a certain symbol under the premise of an agreement, which is consciously or unconsciously. The audience's selective attention, understanding, and acceptance should be used under the premise of the agreement.

The types of symbols used by the transmitter or receiver consciously or unconsciously in a specific communication link, such as language, **, color, etc. in the film are different symbols.

Symbols can be divided into signals and symbols, which in turn can be divided into verbal and non-verbal signs. The former is the literal meaning of the symbol and belongs to the core part of the meaning, and the latter is the extended meaning of the symbol and belongs to the peripheral part of the meaning.

The method of changing the symbol of the computer keyboard is as follows, which is introduced by switching punctuation marks as an example:

1. When using, you can use the "shift" key to switch punctuation marks on the keyboard. For example, press "Will be displayed" without pressing "shift", as shown in the image below.

2. The punctuation marks on the number key row above the keyboard require the "shift" key to be pressed to enter the operation, for example, press "shift" and "3" at the same time, " " will be displayed, as shown in the figure below.

3. Or use the input method installed in the computer to enter punctuation. Right-click on the input method and select the Punctuation option in the Soft Keyboard submenu, as shown in the image below.

4. Then in the open punctuation soft keyboard, you can directly enter the punctuation marks corresponding to the keyboard, as shown in the following figure. The above is how to change the symbol on the computer keyboard.

Summary. 1.Comma, period: Switch the input method to Chinese, find the corresponding comma or period key on the keyboard, and press it.

2.Don number: Switch the input method to Chinese, and then press and hold the question mark key on the keyboard, and the ton number will come out directly.

3.Double quotes: Hold down the shift key, find the quote key on your keyboard, and double-click it.

4.Colon: After holding down the shift key, find the colon key on your keyboard and press it.

Computer symbols: how to type them out with a keyboard.

1.Comma, period: Switch the input method to Chinese, find the corresponding comma or period key on the keyboard, and press it.

2.Don number: Switch the input method to Chinese, and then press and hold the question mark key on the keyboard, and the ton number will come out directly.

3.Double quotes: Hold down the shift key, find the quote key on your keyboard, and double-click it.

4.Colon: After holding down the shift key, find the colon key on your keyboard and press it.

What about this. Ask about custom messages].

shift+enter the key above.

Is it possible, dear.