How to channel the beads in cross stitch, how to embroider cross stitch beads?

The easiest way to thread beads is a half-needle, or 1-4 needle. If you want to fix the beads without falling off or shifting, you need to use two strands of embroidery thread as follows: first fix the beads on the embroidery cloth with half a needle (the embroidery thread passes through the beads), then thread the needle back through the opening hole, separate the two strands of embroidery thread, cross both sides of the beads, and finally thread the needle through the hole at the opposite corner.

If the design is a string of beads. When embroidering such beads, first of all, wear all the beads on the embroidered cloth with a half-needle, and after the beads are strung together, the thread is walked back, this time on top of the embroidered cloth, and the beads are strung again. The last method is to use a full needle.

Fix the beads on the embroidery cloth with half a needle, then add another needle to make a full needle, and string the beads again. Whether the direction of the hole in the bead is sideways or upwards depends entirely on the direction of the full needle and which needle of a cross x is on it. Let's try it.

When stringing beads, don't pull the thread very tightly, if you pull it too tightly, the beads will be squeezed left and right to ......When you wear the beads, the hand feels the power of just straightening the line, and when there is a large area of beads, after the span of the bottom line is repaired, it is necessary to fix it at intervals with a thread, and the entire bead part, the distance of the fixed beads should be consistent, so that it is neat and ......Just like necklaces, if the necklace is too tight, the beads will be squeezed into a crook......ed arrangement

Cross-stitch. Bead embroidery on it:

1. Thread the embroidery needle through the hole on the top of the cross-stitch from the reverse side.

2. Pull the bottom line out.

3. Prepare the beads you need and spread them flat on the table.

4. Pinch the needle and pass the tip through the hole of the bead.

5. Put on the needle tip of the bead and thread it back diagonally on the hole in the cross-stitch (i.e., follow the cross-stitch method).

6. So the beads are embroidered.

Embroider the beads on the cross-stitch top, pass the needle through the hole in the cross-stitch top, and pull the bottom line out; The specific operation steps of embroidering the beads on the cross-stitch are as follows:

1. Thread the needle through the hole in the cross-stitch.

2. Pull the bottom line out.

3. Prepare the beads you need and spread them flat on the table.

4. Pinch the needle and pass the tip through the hole of the bead.

5. Put on the tip of the bead and put it back on the opposite corner of the hole in the cross-stitch.

6. So the beads are embroidered.

Half-needle embroidery you will be able to embroider beads with half-needle embroidery. Arrange along the grid, a needle up to wear a bead and then from the diagonal needle eye to pierce down, it completes a grid, simply put, embroider half a needle to wear a bead, so look at the picture next to embroider on the line. The beads are not easy to wear, you can prepare a small box, pour the beads into the small box when wearing the beads, and when you need to use the beads, use a needle to prick the small box.

Don't wear it with your hands, it will be easy to get pricked in your hands.

First come from one end of the cross.

Then pick a bead with a needle and place the needle diagonally from the cross.

Come from the other end. Divide the thread in half and snap it on both sides of the bead.

Finish! The following is a cross-stitch bead rendering.

1. Choose the size of the beads: It is important to choose the beads. When embroidering, try to choose beads with a more uniform size, too much difference will affect the overall effect.

2. Pay attention to the direction of the beads: the tilt direction of all beads must be consistent.

3. About the starting point: it is usually patterned'The bottom row (bottom left or bottom right) is the starting point.

4. About the needle: When starting the needle, after passing a few needles on the back of the embroidery cloth (be careful not to penetrate to the front), thread it from the needle starting point.

5. About the needle: when the embroidery thread is about to run out, thread the needle into the back of the embroidery cloth, thread a few needles on the back of the embroidery cloth, and then cut it directly without knotting. Be careful not to tie knots in the embroidered cloth.

6. After each stitch is embroidered, the needle is on the front of the embroidered cloth, and only when the needle is collected will the needle go to the back of the cloth. So you don't need to use a bandage to assist in the completion, Small summary: It is a very simple bead embroidery method, hehe, in fact, it is similar to cross-stitch, as long as two stitches, thread the thread first, thread a bead after sewing the first stitch, sew a stitch diagonally, and then repeat the ......I hope everyone can embroider the perfect bead embroidery!

Generally, we use thread directly to sew our cross-stitch, but now there are many cross-stitch based on beads to embellish, that is, to thread the beads into the sewing process, so that the cross-stitch looks better, so how does cross-stitch wear beads? How many strands of thread are used to wear beads?

First come up from one end of the cross, then pick a bead with a needle, go down the needle diagonally from the cross, and then come up from the other end, divide the thread in half, and clamp the bead on both sides. In this way, the beading of the cross-stitch is completed.

The number of strands used for cross-stitch beading should be determined according to the size of the beads you are stringing, generally if it is only 8 dense beads, that is, the smallest type of beads, use 2 strands. If the inner diameter of the bead is relatively large, increase it to 3-4 strands, you can also measure it with your eyes, if it is the smallest bead with the smallest hole, the thread is not good to take when you can use the fish wire to pass, because the pinhole is sometimes too large to pass through smoothly.

So there is also a trick to how to choose this kind of beaded thread, embroidery thread of one color with beads, embroidery thread of one color with background embroidery cloth or transparent thread.

Each thread has its own effect, with light threads making the beads appear brighter, and dark threads preventing the beads from being confused with the colors of other threads. If you want to fix the beads without falling off or shifting the element, you need to use two strands of embroidery thread in the following way: first fix the beads on the embroidery cloth with the method of embroidering half a needle (the embroidery thread passes through the beads), then thread the needle again through the opening hole, separate the two strands of embroidery thread, cross both sides of the beads respectively, and finally thread the needle through the hole in the opposite corner.

Don't underestimate a small beading activity, it also has a lot of tricks in it, but as long as we master the tricks, our work will become easier and more effective with half the effort, so you might as well learn it.

1. The thread passes through the beads first, and is embroidered.

2. Embroider to the grid where the beads should be worn, first upload the thread from the beads, and then embroider the cross-stitch.

1. Cross bai embroidery bead embroidery.

Soft art is on the embroidered cloth for the exclusive use of du

According to the DAO abstract pattern or geometric pattern of his own design, he specially embroiders the beads of one or more genera and species by hand. The highlight of bead embroidery art is the jewel, crystal gorgeous, bright and coordinated color, refracted by light and embossed effect, is the ideal high-end fashion gifts, interior decorations for modern life.

2. So how to string beads with cross-stitch beads?

First come from one end of the cross. Thread a bead with a needle and put the needle diagonally from the cross; Come from the other end. Divide the thread in half and snap it on both sides of the bead and you're done!

After embroidering, wear it, otherwise leave a place or something, and then it will be troublesome if you count the wrong grid, and there is nothing wrong with wearing beads after embroidery, and it is not easy to leave blank.

Embroider the beads with half a needle.。 Pay attention to the direction.

The beads are left empty, and they are all done, and then the beads are worn.

1. First come from one end of the cross.

2. Pick a bead with a needle and needle diagonally from the cross.

3. Come up from the other end. Divide the thread in half and clamp the beads on both sides of the 4 and last strokes to complete.

1.Embroidering beads requires two strands of thread.

2.Use the half-needle method to fix the beads on the embroidery cloth.

3.Come from the other end.

4.Separate the two strands, bypassing both sides of the beads.

5.Pierce through the hole in the opposite corner.

This bead is very firmly fixed on the embroidered cloth, and it is also very tight to move by hand.

Each bead should be embroidered with one needle, half a needle, and the direction should be the same.

There is a pillar between the towns of the light.

After putting on the beads, embroidery according to the technique of half a needle can be done.

Look at the drawings yourself and check the line. If you really don't understand, ask the people around you to teach you.

1.Embroidering beads requires two strands of thread.

2.Use the half-needle method to fix the beads on the embroidery cloth.

3.Then get the needle out of the hole where it started to come out (the bottom left corner of the grid)4Separate the two strands, bypassing both sides of the beads.

5.Pierce through the hole in the opposite corner.

This bead is very firmly fixed on the embroidery cloth, and the manual movement is also very firm, and the direction of the bead is the same.

Because many embroidery friends ask how to embroider this bead, so here is an explanation.

11ct, similar to the normal embroidery lattice, 2 strands of thread embroidered beads, the first stitch through the middle of the beads, the beads are nailed to the cloth; When embroidering the second stitch, separate the two strands and jam the beads between the two strands.

14ct, the same as 11ct.

At present, many embroidery friends are OK to wear it directly, such beads are relatively loose, I hope it will be a little helpful to major embroidery friends.

It's similar to cross-stitch, but as long as two stitches, thread first, thread a bead after the first stitch, sew a stitch diagonally, and repeat, it's okay, it should be said that it's simpler than cross-stitch.

This one is not embroidered, but glued one by one, very simple.