What is the fault of Xizi Elevator E35?

The reasons for the failure of Siemens elevator E35 are as follows.

First of all, check whether the line of the elevator is normal, and whether the limit sensors are normal.

If there is a fault in Siemens elevator, it is best to find professional personnel to repair it, after all, this is a problem that affects safety.

Xizi Electric, what is the fault of 135, this may be the foundation of Siemens' research, 35 is the code name, if there is a failure, is it a fault of 35?

Like this elevator, it is generally not easy to have problems, but if there is a problem, it is especially like the kind of convenient elevator, which is particularly dangerous.

What is the fault of the third and fifth of Xizi Elevator this depends on his playing time some time can not be different for all their ministers because it is no longer used this.

Xizi elevator 135 what is the fault, Xizi elevator, that is, the first thing is to say that if there is a fault, it is best to deal with it for those staff.

What is the fault of Xizi Elevator E35? In fact, it is best for you to contact the maintenance unit of the elevator and ask them to send engineers to provide door-to-door service.

Well, I don't know what's wrong with this device, but you can ask some professionals who can know that I live here, and there is something you want to know.

If you don't understand, you can directly contact the elevator maintenance personnel and ask them to help operate and repair it.

Siemens elevator has this fault, hurry up to find the elevator maintenance master, let them come to the door to repair.

Xizi Tiandi this morning, you can also follow the instructions to take a look at the fault in the Xizi store, and you will remember what the fault is after a dozen.

Xizi elevator its fault, if the fault is concerned, you can find that kind of after-sales personnel to help you repair it.

What fault is the elevator 135, 135 may be a problem with the electronic circuit board, you can go directly to the electronic repairer.

What are some specific debugging methods for the drama TV series here?

I just checked for you, and the information I told you shows that this is an internal line fault.

Riding tram 1325, this may be because the power is not enough, so if there is a problem with the circuit, you should be filial to the maintenance and find him to tell you that I can't help it.

This kind of statement may be a problem caused by his usual malfunction.

You can check the equipment manual, there is fault information in the manual, or consult Xizi customer service.

Summary. Elevator E37 fault solution:

Elevator E37 fault** indicates that the contactor feedback is abnormal, and there are many reasons:

1. The contactor is not engaged, and the hardware needs to be repaired.

2. The feedback signal of the contactor is sticky, and the system needs to be restored.

3. It is caused by the loose UVW wiring and needs to be reconnected to the UVW cable.

Do not overload the elevator to use, accidents may occur, which may lead to rapid aging of parts, the elevator should not press the emergency button at will, and it can only be used in an emergency.

What is the fault of Xizicio elevator E37-103.

Elevator E37 fault solution: Elevator E37 fault ** indicates that the contactor feedback is abnormal, and there are many reasons: 1. The contactor is not engaged, and the hardware needs to be repaired.

2. The feedback signal of the contactor is sticky, and the system needs to be restored. 3. It is caused by the loose UVW wiring and needs to be reconnected to the UVW cable. The elevator should not be overloaded to make it grinding, accidents may occur, which may lead to rapid aging of parts, and the elevator should not press the emergency button at will, and it needs to be used blindly when the emergency banquet is in danger.

Good! Thank you!

E37 fault** is expressed as follows: Talking about bending E37 brake contactor feedback abnormal Fault cause The output of the brake is inconsistent with the feedback signal Handling method 1 Check whether the spine brake coil and feedback contact are correct; 2. Confirm the signal characteristics of the feedback contact (normally open, normally closed); 3. Check whether the power supply of the control circuit of the wide brake coil is normal.

Summary. Sorry to keep you waiting, I'm happy to answer for you, what is the fault of the elevator report E38: E38 is the controller rotary encoder signal abnormal, the reasons are as follows:

1. When the elevator is running automatically, there is no rotary encoder pulse input; 2. When the elevator is running automatically, the direction of the input rotary encoder signal is wrong; 3 Set to open-loop operation (F0-00) under distance control. Solution: 1 Confirm whether the rotary encoder is used correctly; 2. Replace phase A and B of the rotary encoder; 3. Check the setting of F0-00 and modify it to closed-loop control; 4. Check whether the system grounding and signal grounding are reliable; 5 Check whether the line between the encoder and the PG card is correct.

Sorry to keep you waiting, I'm glad to answer for you, what is the fault of Xiangpai Elevator E38: E38 is the controller rotary encoder signal is abnormal, the reasons are as follows: 1 When the elevator is running automatically, there is no rotary encoder pulse input; 2. When the elevator is running automatically, the direction of the input rotary encoder signal is wrong; 3 Set to open-loop operation (F0-00) under distance control.

Solution: 1 Confirm whether the rotary encoder is used correctly; 2. Replace phase A and B of the rotary encoder; 3. He Yanxiang checked the setting of F0-00 and modified it to closed-loop control; 4. Check whether the grounding and signal grounding of the meditation system are reliable; 5 Check whether the line between the encoder and the PG card is correct. <>

Expand your knowledge: An elevator is a permanent transportation equipment that serves a number of specific floors in a building, and its car runs on at least two rigid rails that hang straight on the horizontal plane or have an inclination angle of less than 15 ° with the lead sock collapse line. There is also a step type, and the tread board is installed on the track for continuous operation, commonly known as a round escalator or moving walk.

Stationary lifting equipment serving the specified floors. A vertical lift has a car that runs between at least two rows of rigid rails that are vertical or have an inclination angle of less than 15°. The size and structure of the car are convenient for passengers to enter and exit or load and unload goods.

It is customary to use elevators as a general term for vertical transportation within a building, regardless of the mode of drive. Hope it helps you <>

What is the fault of elevator E37-104.

Hello, pro-source pants, I am happy to answer for you: what is the fault of the elevator E37-104 If it is the Menak system, the E37 fault ** means that the E37 brake contactor feedback is abnormal. The cause of the fault is that the output of the brake is inconsistent with the return number of the feedback message.

The handling method is as follows: 1. Check whether the brake coil and feedback contact are correct; 2. Confirm the signal characteristics of the feedback contact (normally open, normally closed); 3. Check whether the power supply of the brake coil control circuit is normal.

In the case of the Menak system, the E37 fault** indicates that the E37 brake contactor feedback is abnormal.

3. Check whether the power supply of the control circuit of the brake coil is called and disassembled normally.

Xizi elevator fault code 35 how to repair the file group method is as follows: Menak 3000 elevator e35 so the line of rough orange shoji **103 is not carried out hoistway self-learning or hoistway self-learning is unsuccessful.

1. It is not at the bottom or overhaul state when starting;

Solution: Confirm that the upper and lower forced deceleration switches and signals are normal;

2. There is no leveling signal input for more than 45 seconds of continuous operation; Solution: Check whether the leveling signal line is connected correctly;

3. The pulse recording of the floor is abnormal. Solution: Check the encoder.

Connection. Extended Materials.

Maintenance precautions.

1. The elevator is composed of two parts: mechanical and electrical. If the elevator is not maintained daily, the safety of the elevator will not be guaranteed; If the elevator needs to be refueled without stool fiber, it will cause wear and tear of the elevator mechanical parts, so that the service life of the elevator is greatly shortened, and the elevator cannot be used normally.

2. In the process of using the elevator, some elevator users find temporary workers or unqualified companies to do elevator maintenance in order to reduce costs and save money. If it is maintained by the elevator manufacturer or a qualified professional company, on the one hand, the maintenance technology and quality are ***, and on the other hand, once there is a problem, someone is responsible.

E53 Door Lock Shorting Fault.

In the automatic operation of the elevator, there is no door lock disconnection process when parking.

1. Check whether the operation of the door lock circuit is normal;

2. Check whether the feedback electric shock action of the door lock contactor is correct;

3. Check that the system has received the signal to open the door in place when the door lock signal is valid;

Supplementary Notes on Fault Logging:

1 e41 does not log this fault in the elevator stop state.

2 E42: This fault is the automatic reset when the door lock is on, and the automatic reset after the fault in the door area for 1s.

3 When an E51 or E52 fault is in progress, if the fault persists, it will only be recorded every 1 hour.

Elevator E36 failure refers to the elevator door that cannot be closed or closed tightly, which will cause the elevator to fail to operate normally. Here's how to fix it:1

Check the door leaf and door frame for foreign objects or debris stuck, and clean the door leaf and door frame silver. 2.Inspect the door leaf and door frame for damage or deformation, and replace the door leaf or door frame if necessary.

3.Check that the door lock is working properly and replace the door lock if necessary. 4.

Check whether the gap between the door leaf and the door frame is appropriate, and adjust the gap between the door leaf and the door frame if necessary. 5.Check that the sealing strip between the door leaf and the door frame is in good condition and replace the sealing strip if necessary.

6.Check the connection between the door leaf and the door frame for loose or damaged pieces, and replace the connection if necessary. 7.

Check that the sensor between the door leaf and the door frame is working properly and replace the sensor if necessary. 8.Check whether the elevator control system is working properly, and repair or replace the elevator control system if necessary.

The above are some possible solutions, but the specific solutions need to be judged and dealt with on a case-by-case basis. If you are not familiar with elevator repair and maintenance, it is recommended that you contact a professional elevator maintenance personnel to deal with it. Forward rents Kai.