Do you have! Welding wire that is welded directly with a windproof lighter!

It is difficult to grasp the effect of fire welding, and it is easy to appear false welding or virtual welding, welding wire.

It is used with a welding gun, and it is used for home processing of stainless steel small parts, and is not used in industry. Able to process and weld copper, iron, aluminum, stainless steel products. The welding product should not be too thick, and can only be used for small work processing, repair and trial.

TIG welding. Unlike electric welding.

The electrode itself is a filler, and TIG welding does not have a filler. TIG welding stainless steel without welding wire is the use of melted base metal to form a weld. If two stainless steel plates are butt, in the case of no welding wire, the two plates must have no gaps, when the tungsten produces a high current for the weld--- that is, high temperature is generated, the two plates are melted at the same time, after the welding torch switch is released, the molten stainless steel water will condense together and weld up, if there is a seam, the welding wire must be added.

GMT-SKD61 > HRC 40 43

Aluminum die-casting mold, with good heat resistance and crack resistance, hot gas stamping die, aluminum-copper hot forging die, aluminum-copper die-casting mold, with good heat resistance, wear resistance, crack resistance. Generally, hot die casting molds often have tortoise shells.

crack-like, mostly caused by thermal stress.

It is also caused by surface oxidation or corrosion of die-casting raw materials, and the heat treatment is adjusted to an appropriate hardness to improve its life, and the hardness is too low or too high is not applicable.

No! If you don't have an electric soldering iron at hand and want to use it urgently, you can use a windproof lighter, the steps are as follows: 1

The part that needs to be welded is polished, that is, the oxide layer on the surface is scraped off. 2.The solder wire is in contact with the weldment, and then the purpose of heating the weldment and the solder wire at the same time with a windproof lighter is to tinn the weldment, and the weldment can be made after the tinning of the weldment is completed, but it must be noted that the lighter weldment does not hurt the insulation layer of the wire and other components and items.

It is difficult to grasp the effect of fire welding and is prone to false welding or virtual welding, the welding wire is used with a welding gun, and the household processing of stainless steel small parts is not used in industry. Able to process and weld copper, iron, aluminum, stainless steel products. The welding product should not be too thick, and can only be used for small work processing, repair and trial.

TIG welding is not like electric welding, the electrode itself is a filler, and TIG welding does not have a filler. TIG welding stainless steel without welding wire is the use of melted base metal to form a weld. If two stainless steel plates are butted, in the case of no welding wire, the two plates must have no gaps, when the tungsten produces high current for the quasi-weld--- that is, high temperature is generated, and the two plates are melted when they are cracked in the field, after the welding torch switch is released, the molten stainless steel water will condense together and weld up, if there is a seam, the welding wire must be added.

GMT-SKD61 > welding zinc patch, aluminum die-casting mold, good heat resistance and crack resistance, hot gas stamping die, aluminum-copper hot forging die, aluminum-copper die-casting die, good heat, wear and crack resistance. Generally, hot die casting molds often have tortoiseshell cracks, most of which are caused by thermal stress, but also caused by surface oxidation or corrosion of die-casting raw materials, heat treatment is adjusted to appropriate hardness to improve its life, hardness is too low or too high is not applicable.