How about a puppy vacuum cleaner to wipe the tiles, will it leave water marks?

The puppy vacuum cleaner is good and won't leave water marks.

1.Use glass water, with glass scraping, a scrape is OK, there is no water trace, and finally wipe off the four sides of the glass can not be scraped off (the advantage of using glass water is that a protective layer can be formed after wiping the surface, which is convenient for the next cleaning, and it is not easy to stick a lot of dirty);

2.Dry cloth or paper, wipe off traces at the end;

Regarding tiles, smooth marking can be washed with tile surface cleaner or direct water, and then wiped with a dry cloth; If it is a rough antique brick, you can use the kitchen's strong greasy detergent, the use method is told according to the instructions, (finally can be brushed off with a brush) If it is not very dirty, just wash it with water, after all, the thing hurts the surface of the tile.

Mix alcohol and dish soap in the water, wipe the glass with this to be particularly clean, and then wipe it again with a dry rag with particularly good water absorption to easily solve the watermark problem. If the tile is not clean, there may be a layer of wax on it, and it looks a little foggy, buy a bag of five cleaning powder, use a slightly damp rag or scouring pad to dip some five cleaning powder, apply it vigorously, and then wipe off the excess five cleaning powder with a clean towel. Usually wipe the floor in the water with some clothes softener + dish soap, according to 1 than dish soap to wipe the ground, so that the ground is not easy to leave lint and dust, with a particularly good water absorption mop wipe, the effect is better, when wiping the floor, the rag must be wrung out particularly dry, otherwise there will be a watermark after wiping the ground.

Hello, white vinegar scrubbing ceramics itself will not leave traces, unless it is a long-term soaking will leave traces, but will leave a smell, it is best not to use white vinegar to scrub the tiles!

The connoisseur [He Guangning] will answer for you. If mine is helpful to you, please be prompt! Your recognition is the biggest motivation for me to answer the questions! Thank you!

Hello, this wipe can remove stains but will not leave traces.

Probably not, pay attention to rinse after scrubbing.

Method 1: Choose a mop or rag with strong water absorption.

When we mop the floor tiles or wipe the tiles, it may be because the quality of the mop is not up to par and the water absorption is not strong, resulting in watermarks often leaving on the ground after mopping once, so we need to replace the absorbent mop or rag to clean.

How to drag a tile without leaving a watermark What to do if there is a watermark after the tile is wiped.

Method 2: Baking soda + dish soap.

We can add baking soda and dish soap to the water for washing the mop, then stir and mix, and then wash the mop, and keep the mop moist when mopping the floor for the first time, and we don't have to change the water too often, so as to ensure that all the stubborn dirt on the ground is dragged out; Next, use a dry sponge or rag to clean the dirty water on the ground, wash it and mop it again without leaving a watermark.

How to drag a tile without leaving a watermark What to do if there is a watermark after the tile is wiped.

Method 3: Wet mopping + dry mopping.

We can prepare two mops, first clean the tiles for the first time with a wet mop mop, and then use a dry mop to mop the watermark after the floor is cleaned, and when the floor is dry, it will not leave a watermark.

Mopping the tile floor with a mop will definitely leave a watermark, this is inevitable, it is recommended to mop the floor with a sponge mop, which has good water absorption and will not leave a watermark.

1. Try to wring out the water on the mop when mopping, 2The use of rubber wool mop will not leave a watermark.

To keep this tile free of water, the linen you use must be. It's almost dry. That.

Just wipe it with a dry cloth again.

1. The watermark on the tile is caused by too much water on the mop when mopping, and the waterproof property of the tile is good. If you want to mop the floor when the tile does not leave a watermark, everyone try to wring out the mop before mopping before mopping; Or we use a cotton mop with good water absorption to mop the floor; Or maybe we use a wet mop to mop the ground clean first.

Use a dry mop to mop the water stains dry; We can also add table salt to the clean water to speed up the evaporation of water from the ground when mopping.

2. If you want to mop the ground more cleanly, you should use a vacuum cleaner and a broom to clean up the dust and hair on the ground before mopping; When mopping the floor, we should not only mop the floor with water, but add some dish soap or baking soda + white vinegar, soap and other products to the water; Or use rice water to mop the floor, which can effectively remove the stains on the ground.

The way to not leave a watermark is to reduce the water content of the mop, unless there is a visible stain, otherwise you can use a dry rag directly.

My house is also a tile floor, I have used 84 and hand sanitizer to wipe at home, because the urine is acidic, after urinating, you will see traces on it, there is no way, you can only let him learn to pee in the designated place as soon as possible.

In addition, if you paint something with a smell on it, the dog will mark it in order to occupy the territory because of its nature, and continue to pee there next time and continue to open up new territory, in short, it is troublesome to urinate everywhere.

My experience is that it is best to wipe the urine clean with water and then let him learn to pee in the designated place as soon as possible.

With oxalic acid, it is very economical, and it is only a few quick dollars a bottle.

If you're afraid of yellow, you can clean it up with disinfectant.

There is a watermark on the tile floor after mopping, and there are generally the following reasons.

1. The mop itself carries too much bai. It is recommended to wring out the mop, or use a cotton mop, which has a better effect of absorbing water.

2. The surface of the tile has a good protective layer, which is repulsive to water.

Solution: 1. You can use a mop cloth first, and then wipe it with a dry mop cloth.

2. There will be no watermark if you scrape the ground with a glass scraper, but it requires a certain amount of skill and is too tiring.

In fact, it is also a common problem to flood the tile floor after mopping the floor, and it is recommended to wring out the mop before mopping or using a cotton mop, which has a very good water absorption effect. Another solution is to wipe it with a wet mop first, and then with a dry mop, so that there is no watermark on the surface of the floor tile.

Add a little water to the floor when mopping, and the floor will be mopped clean without leaving water stains, which is better than mopping the floor with clean water.

If there is a water stain, it may be that the mop is not clean, and the mop must be cleaned, otherwise there will definitely be water stains.

Using a cotton mop will absorb water, in addition, the mop should be wrung out after washing, and after taking it off, it can be wiped again with a cotton dry mop or cotton towel. Be sure to change to pure cotton.

Go buy the ones that are absorbent, and they should improve. If it runs economically, there is that kind of dust washer with washing, which is very useful.

Change the mop, or use two, one wet and one dry, and mop twice.

Putting the mop in the sun is basically dry and then mopping can solve the problem.