How to deal with the water on the waterproof surface before doing floor heating

The company has introduced the extruded polystyrene foam board technology, the plant covers an area of 3,000 square meters, and a new and renovated 1 high-end product production line, Line 1 mainly produces B1, B2 insulation extruded plastic board, and Line 2 mainly produces ordinary waterproof and thermal insulation extruded board. The product has the characteristics of fire prevention, heat preservation, sound absorption and noise reduction, and the thermal insulation performance is better!

Bathroom floor heating is brushed with a layer of waterproof material before laying floor heating, that is because after the floor heating is heated, the waterproof material will volatilize, if it is in the upper part of the floor heating, it is easy to damage the waterproof layer.

As for waterproofing paint to do waterproofing, if you plan to do it yourself, you can take a look at the specific methods given by Hubang floor heating:

First, grassroots treatment.

Waterproof layer base (leveling layer): the surface of the base layer should be solid with a certain strength, clean and clean, no floating soil, sand particles and other dirt on the surface, the surface is smooth, smooth, no loosening, it is required to smooth and calender, and the residual mortar block or protrusion should be flattened with a shovel.

Second, the details of processing.

1) Yin and yang angle: The connection between the ground and the wall should be wiped into an arc with a radius of 20mm.

2) Pipe root position: After the pipe root is positioned through the wall, the floor slab is blocked with cement mortar, and the parts connected to the ground around the pipe root are plastered into a figure-eight shape with cement mortar.

3) The pipes and connectors through the wall should be installed firmly, and the joints should be tight, if there is rust

The oil stain should be cleaned with a wire brush, sandpaper, solvent, etc.

4) After the base is treated, there should be no obvious water accumulation on the base layer.

Third, the waterproof layer construction:

1. Requirements for the base surface before construction: it must be flat, and there must be no defects such as chiseling holes and grooves.

2. Before construction, the wall and floor need to be sprinkled with water to remove the gas in the wall holes, so that the wall surface is denser and the surface is more permeable.

3. When the powder is mixed with the liquid material, it is necessary to use an electric drill, and stop it for 3-5 minutes after stirring at a constant speed; If it is manual stirring, it needs to be stirred for about 10 minutes, and then left for 10 minutes before use.

4. When using, if there are bubbles in the slurry, the bubbles need to be brushed open, and there should be no bubbles.

5. Note: Brushing, the first time you need to paint in only one direction, and the second time you need to paint in the opposite direction.

6. The interval between the first and second coatings is best about 4-8 hours.

7. The façade is not easy to brush out the thickness, and it can be painted several times When painting, there will be left and right holes, so it needs to be painted again and again to increase its density and fill the void density.

8. It is better to do the closed water test after 2-3 days of construction, and it is better to do the cement curing cycle within 7 days, and more maintenance is required.

Do in the house need to wear a pair of big cotton boots, the feet are not hot, floor heating in our here are paved, in the community, self-built houses are paved floor heating, now are paving floor tiles, winter soles are cold, after paving floor heating, the heat will go up from the bottom, first from the foot heat, the house is warm, we are popular here to pave floor heating, next year our home will also be paved floor heating, I will send the floor heating laying process to everyone floor heating is an emerging form of heating in the past ten years, there is a momentum to replace radiators, but it is not easy, People in the city have more contact. Rural people have just come into contact with it in recent years, and there are not many people who really know how to do it, and when they need heating at home, they will be entangled between radiators and floor heating.

For example, if you don't use 10 kilowatt-hours of electricity a day when you don't heat up, the electricity bill per kilowatt-hour is yuan, but if you use electricity for heating, you need to use 100 kilowatt-hours of electricity every day, then the extra degree is not yuan, and the electricity bill will rise, and the more you use, the higher the electricity price. So the average rural person can't bear it. My whole body felt refreshed.

I don't quite understand what you mean by floor heating and plumbing, floor heating, including coal and electricity, in the countryside is not upstairs to live in the place should be a good gas stove, gas stove than electricity, but also cooking and tea, if it is a small number of buildings in the countryside and a small number of people live without collective heating, it is not easy to say.

In fact, this floor heating and plumbing have their own advantages and disadvantages, and this should also be decided according to their own house area ratio. It is also determined by the individual's economic conditions. However, in rural areas, there is still more water heating, which is also considered in terms of cost and some expenses.

My home is just using plumbing, and it's good to use. So why did we choose plumbing instead of underfloor heating?

Professionally called natural (gravity) circulating hot water heating system: the system consists of a heating center (boiler) and a cooling center (radiator), and the radiator and boiler are connected by a supply and return channel. The principle is:

In the process of water circulation, the density difference between the water supply and the return water is generated due to the existence of the temperature difference, and the system relies on the density difference between the supply and return water as the circulation power.

The ground needs to be waterproofed, because in case of water leakage, the loss caused by not waterproofing is very large.

It may take some time to do waterproofing, but it will save a lot of trouble in daily life, so it is necessary to do waterproofing.

Of course, it is needed, because the floor heating may be damaged and leaked after a long time, so it must be waterproof first.

Of course, it is necessary to do waterproofing, because the drip bar is also easy to be damaged when it is used, so that water leakage can be avoided.

It needs to be done, because it is afraid that the water floor heating will leak at any time, so be sure to do a good job of waterproof measures to reduce the trouble in the future.

Yes, this is because hot water can ruin the cleanliness of the floor and may cause the floor to warp.

When installing water floor heating, you need to do a good job of waterproofing, because after having floor heating, there will be some water left on the ground, if you don't do waterproof at this time, people are easy to slip.

Of course, we have to do waterproofing, but in many cases we don't do it, so we don't operate according to the process, and it will be very troublesome if there is a problem later.

Need. This prevents water leaks, protects the floor, and protects the floor.

It needs to be waterproof, in case the water seeps in, it is always bad for the machine.

Before laying floor heating, it is necessary to do waterproofing, so that the water pipe will not affect the downstairs after the leakage, in the case of conditions, it is recommended to do two times waterproofing, in the floor heating below and above each layer of waterproofing, after the completion of the waterproof work, it is necessary to carry out a closed water test to check whether the waterproof work is in place.

Second, what needs to be paid attention to in the laying of floor heating.

1. When laying floor heating, it is necessary to find a professional floor heating construction team to lay, and before laying, it is necessary to check the tightness of the floor heating system, and ensure that the ground is dry.

2. In the process of laying floor heating, it is not allowed to nail on the ground, and after the laying is completed, it is also forbidden to nail on the ground, so as not to cause damage to the floor heating pipe. Before laying laminate flooring, a layer of EPE composite film should be laid, which can play the role of insulating moisture.

3. When laying the floor, the keel can not be laid, so as not to affect the heat dissipation effect of the floor heating, so as to damage the floor heating pipes, and after the floor heating is installed, it is necessary to wait for 24 hours to open the floor heating for heating, and it cannot be opened for use immediately after the floor heating is laid.

With the continuous development and change of technology, there are more and more heating methods nowadays, and underfloor heating is one of the most popular, because this method takes up the least space. So, does the floor heating need to be waterproof? What do you need to pay attention to when installing underfloor heating?

Let's take you to find out.

Underfloor heating needs to be waterproofed, because this can prevent water pipes from leaking, so as not to cause unnecessary trouble to the downstairs neighbors. If your own conditions allow, you can do two times of waterproofing, and make a layer of waterproof above and below the floor heating, but if the conditions are limited, then do a layer of waterproofing on it, that is, wait until the floor heating installation is completed and then do a layer of waterproofing.

Precautions for underfloor heating installation.

1. The installation of floor heating must find a construction team with professional knowledge of floor heating. If you are looking for an amateur decoration team to install, the effect of paving is self-evident. Floor heating must be checked before paving the tightness of the system, the ground needs to be kept dry, and the moisture content of the cement floor is best lower, and the indoor humidity in the construction process can not be too large, regardless of whether there is geothermal heating, the ambient humidity before and after installation must be about 60 degrees.

2. During the construction of floor heating, the ground cannot be nailed, and after the construction is completed, the ground is also forbidden to nail, because the ground will destroy the heating coil if it is nailed. In addition, before laying the laminate floor, it is necessary to lay EPE composite film, which can isolate the moisture, so that the moisture can be released from the surrounding skirting boards, and it is necessary to remember that the keel can not be laid, so that the thermal conductivity of the air will become smaller, affecting the heat dissipation effect of floor heating, and it may also damage the pipe.

Article summary: The above is all about whether floor heating needs to be waterproof and what needs to be paid attention to in floor heating installation, I hope it will help you. If you want to know more about it, please stay tuned to Qeeka Home.

First, the ground to be laid geothermal is treated, keep the ground tidy, dry and flat, and then brush a layer of waterproof paint, which can prevent the leakage of geothermal pipes from seeping into the downstairs, and the insulation layer can be laid after the paint is dry to avoid the smell of the waterproof membrane when heated, and then you can lay the geothermal pipe, and then lay a layer of EPE composite film on the surface to isolate the moisture, and finally lay the floor.

Waterproofing is mainly done in bathrooms, kitchens, balconies, waterproofing has nothing to do with installing floor heating, floor heating is mainly in the living room, bedroom, these places do not need to do waterproofing.