What are the methods of floor heating cleaning, and which is the best way to clean floor heating

Current geothermal cleaning methods:

The first is chemical cleaning: chemical cleaning should be said to have a good cleaning effect, but it is rarely used because it is easy to corrode and aging geothermal pipes and system components, as well as polluting emissions.

The second is projectile cleaning: projectile cleaning decouples the geothermal tube from the water separator, puts the cleaning bullet in the pneumatic gun or geothermal tube, and then jams the pneumatic gun on the geothermal tube, and uses compressed air to eject the cleaning ejection into the geothermal pipe, and comes out from the other end of the tube to achieve the purpose of cleaning. The cleaning effect is good, and the tube can be restored to its original color.

The disadvantage is that the efficiency of unwinding is relatively low, and it is easy to jam when encountering joints and bending of geothermal pipes.

The third is pulse cleaning: Shenyang partner geothermal cleaning company provides you with automatic pulse cleaning, automatic pulse geothermal cleaning uses a combination of gas, water and electromagnetic pulses, converts kinetic energy into kinetic energy through internal vortex power, and carries out high-speed movement in the form of tiny molecules, through thermal energy, kinetic energy and electromagnetic pulse in the operation process. The dirt in the pipe wall is broken down and flushed out of the pipe with water molecules to achieve the effect of cleaning.

Web Links.

The best ways to clean floor heating are: pulse cleaning, projectile cleaning, and chemical cleaning.

1. Pulse cleaning: the advantage is that the operation is simple, only need to disassemble the position of the plug at both ends of the water separator, and it is suitable for all kinds of pipelines. The disadvantage is that the floor heating pipe and water separator are not cleaned for a long time, and the cleaning is not thorough.

2. Projectile cleaning: the advantage is that the cleaning is relatively thorough. The disadvantage is that it needs to untie the pipe, the operation is complicated, and it is not suitable for pipe cleaning that has not been cleaned for many years or the inner wall structure is serious, and it is not suitable for the cleaning of floor heating pipes with joints or dead corners underground.

3. Pharmaceutical cleaning: the advantage is that the cleaning method is simple, does not block the water flow, and the cleaning effect is good. The disadvantage is that the chemical agent used will cause some corrosion to some parts of the floor heating, and the sewage discharge after use will have an impact on the environment.

Time interval for underfloor heating cleaning:

Floor heating cleaning can be cleaned all year round, the best time is the early stage of the heating process every year, due to the different water quality of each section of the customer who has not been cleaned for more than two years at any time to pay attention to cleaning to prevent blockage, customers who do not heat in winter should pay attention to drainage and anti-freezing.

1. Chemical soaking: advantages - thorough cleaning, can fully dissolve the slime attached to the pipe wall, high-quality food-grade raw materials will not cause corrosion to the geothermal pipe; Deficiencies - most of them use low-cost strong acid preparations, which are easy to cause corrosion to pipelines and related components.

2. Projectile cleaning: advantage - cleaning is more thorough, using the friction between the cleaning bomb and the pipe wall to remove the slime attached to the pipe wall, without damaging the geothermal pipeline; Insufficient - the geothermal pipe needs to be disassembled, the underground pipeline has a joint that is not suitable for construction, and the cavity is easy to make the cleaning bomb stuck in the pipeline; At the same time, it is easy to cause secondary damage to the original water separator, valve and other related parts.

3. Pulse wave physical cleaning: advantages - no need for chemicals, no disassembly of geothermal pipes, cleaning is more thorough, due to its unique cleaning principle of slow care, the main pipeline and valve of the geothermal water separator can be cleaned at the same time, so as to avoid long-term scaling and valve blockage; Deficiencies - the construction is limited by space, and some household geothermal water separators are placed in hidden places, and it is not easy to construct when the two ends of the water separators are too close to the wall.

How to clean floor heating, floor heating is the most commonly used way of heating in winter, floor heating is very important to us in winter, and the heating effect is particularly good. Floor heating also needs to be cleaned after a long time, so how to clean the floor heating? Let's take a look at these related trivia.

How to clean the floor heating

1. Chemical agents

Regarding the question of how to clean the floor heating, many people will use chemical soaking to achieve the cleaning effect. In the process of using chemicals, because of the soaking of chemicals, some scale and mud in the pipeline equipment are taken off, so that the pipeline is smoother and will not block the water flow. Cleaning pipes in this way is not only effective, but also relatively safe.

2. Projectile cleaning

Nowadays, there are many people who use the way of projectile cleaning to clean the pipeline, and the projectile cleaning mainly uses the friction between the cleaning bomb and the pipeline to achieve the purpose of cleaning, and the use of this method not only does not damage the pipeline, but also can effectively remove more impurities and dirt at the same time, but the pipeline needs to be disassembled when using this way to do cleaning, but the time and labor required are relatively large, and it needs to be used selectively in combination with the actual situation.

There are generally several ways to clean underfloor heating

1 Rinse with clean water. This is relatively simple, and it is non-corrosive, so it will not have a bad effect on underfloor heating. However, the cleaning is not thorough.

2 Chemical cleaning.

3. Physical ejection cleaning method.

4 High pressure pulse cleaning.

General Operational Procedures

1. Close the water supply and return water isolation valves of the water separator;

2. Connect the pulse induction pipe, and connect the digital computer pulse generator with the water separator general bearing plug end;

3. Connect the water pipe, connect the water source and the computer pulse generator;

4. Connect the gas pipe, connect the air compressor and the computer pulse generator;

5. Connect the sewage pipe, connect one end to the head of the water separator return water bearing plug, and insert the floor drain at one end. Start the cleaning.

1. First of all, the valve of the water inlet and outlet should be closed, and the heating system of your home should be separated from the heating system of the whole area, so as to better operate later.

2. Install a faucet at the position of the plug of the return pipe. You can choose to install it yourself, or you can ask a plumber to do it.

3. Close the water distribution valve in turn, and then leave only one in the open state. The faucet installed at the back is connected to a section of hose that leads directly to the sewer in your home.

4. Open the water inlet valve for heating, and then open the valve of the faucet, and the hot water will be discharged along the water, so that the dirt will also be brought out by the water flow, so that it will have a cleaning effect.

5. After rinsing for a period of time, observe the quality of the water, and then follow the above methods to clean each pipe.

6. After these procedures are completed, you can also clean the sewage interception net by the way. If you find it too troublesome, it won't have much impact if you don't clean it.