The xenon lamp will be very hot for a while, should you replace it with an LED light?

Xenon lamps operate in a temperature range of -40 to 120° and heat generation is normal. If it's too hot, it should be poor heat dissipation, and it is recommended to change the LED headlights. The domestic Qideng LED can be "open heat dissipation", using high-density thickened copper heat dissipation belt + built-in copper vacuum heat pipe + aviation aluminum, which improves thermal conductivity and heat dissipation performance by 300%.

Xenon lamp refers to a high-pressure gas discharge lamp filled with an inert gas mixture including xenon gas and no filament of halogen lamp, referred to as HID xenon lamp, which can be called metal halide lamp or xenon lamp, and is divided into xenon lamp for automobile and xenon lamp for outdoor lighting.

If the xenon lamp is very hot for a while, it is caused by poor heat dissipation, so it is recommended that you replace it with an LED one, which basically does not heat up

It is recommended to change to LED headlights. The LED lamp emits light from the cold light source, with high luminous efficiency and no heat. Like the P90 of Qideng LED, the heat can be completely exported out of the assembly, and the thermal conductivity and heat dissipation performance are very good.

Hello car owner, if your vehicle is equipped with xenon lamps with high heat, then it is recommended that you choose LED lamps with good heat dissipation, LED bulbs have a long service life, low working temperature, basically non-destructive installation, you can choose to change it.

Hello. Sure the LED lights are good! Energy saving and environmental protection, stable performance, no delay, instant start, general LED light model is 12V35W. Low heat generation, best brightness.

Summary. <>

Hello, dear, very happy for your question, xenon lamp for LED only change bulb, help you to inquire, no" No, xenon bulb is high-pressure, if you want to change it, you have to replace the entire xenon lamp. "Hope mine can help you. Wishing you good health and a happy mood!

Is it okay to change the xenon lamp for LED only for the bulb.

Hello, dear, very happy for your question, xenon lamp for LED only change bulb, help you to inquire, no" No, xenon bulb is high-pressure, if you want to change it, you have to replace the entire xenon lamp. "Hope mine can help you. Wishing you good health and a happy mood!

Kiss xenon lamp for LED only change bulb, no" No, xenon bulb is high-pressure, if you want to change it, you have to replace the entire xenon lamp. In general, if there is no lens, don't just replace the LED or xenon bulb, the light is scattered, and the angle of the annual inspection light will also have problems, and the annual inspection can not pass.

If you don't mind the penetration in rain and fog, you can consider LED bifocal lenses. 2. Xenon lamps are suitable for rain, fog and sunny days, and are more comfortable to use. If it is damaged, it can be replaced at any time, and the overall paving effect is better than that of LED.

3. LED uses cold light source, small glare, no radiation, and no harmful substances are produced in use. The working voltage of LED is low, and the DC drive mode is adopted, which saves more than 80% energy compared with the traditional light source under the same lighting effect.

It can be replaced, because the LED lights are relatively stable, and they are not as high-pressure as xenon headlights. The advantages of LED headlights are:

1. High brightness, the brightness is 4-6 times that of the original car halogen bulb; The temperature is very low, generally 50-70 degrees, because the temperature is low, the performance is very stable, there is almost no light decay, instant start, no delay;

2. Moreover, the paving is very even, just like the "5D car LED bulb C6F" that I often get here and ask me to help install during this time;

3. The paving is very uniform, not like the halogen bulb or xenon lamp of the original car, one by one, sitting in the cab, looking very comfortable, not easy to visual fatigue.

If the power is within the set range, the lampshade will not be burned out. However, if you use a high-power bulb that exceeds the set range, not only will the lampshade burn out, but it will also damage the rectifier, voltage regulator, and even the magneto.

Xenon lamp refers to a high-pressure gas discharge lamp that is filled with an inert gas mixture including xenon and has no filament that halogen lamp has, referred to as HID xenon lamp, which can be called metal halide lamp or xenon lamp, and is composed of lamp head, electronic ballast and other components.

The luminous principle of the xenon lamp is to increase the voltage to more than 23000V through the starter and electronic ballast, and the high voltage breaks down the xenon, which causes the xenon to form an arc between the two electrodes and emit light. Xenon lamps are divided into xenon lamps for automobiles and xenon lamps for outdoor lighting. The color temperature of the xenon lamp of the car is between 4000K and 6000K, which is higher than that of the headlight bulb of ordinary cars.

Xenon lamps reduce the burden on the vehicle's electrical system and improve driving safety at night and in foggy weather.

70-80 or so, will not burn out the lampshade.

Xenon lamps are also called HID gas discharge headlamps in the field of automotive lights. It replaces the traditional tungsten filament with high-pressure xenon gas encapsulated in a quartz tube, providing higher color temperature and more concentrated illumination. Since a xenon lamp is a beam of arc light formed by activating xenon gas with a high-voltage current, it can continuously discharge between the two electrodes to emit light.

The power of an ordinary automotive tungsten bulb reaches 55 watts, while a xenon lamp only needs 35 watts, a reduction of nearly one and a half. Xenon lamps significantly reduce the burden on a vehicle's electrical system.

The color temperature of the car xenon lamp is between 4000K and 6000K, which is much higher than that of ordinary car headlight bulbs. It has high brightness, the light color of the 4300K xenon lamp is white and yellowish, due to the low color temperature, the visual effect is yellowish, and the penetration of the light is stronger than that of the lamp with high color temperature, which can improve the driving safety at night and in foggy weather.

70-80 or so, it won't burn out.

Copy the lampshade. This is not going to happen. Its advantage that distinguishes it from halogen lamps is that it does not use tungsten filament to emit light, and it will not burn out the lampshade at all.

HID is the English abbreviation of High Intensity Discharge High Pressure Gas Discharge Lamp, which can be called heavy metal lamp or xenon lamp. Its principle is to fill a variety of chemical gases in the UV-cut anti-ultraviolet crystal quartz glass tube, most of which are inert gases such as xenon and iodide, and then through the supercharger (ballast) the 12 volts DC voltage on the car is instantly boosted to 23000 volts of current, and the xenon electrons in the quartz tube are excited by the high-voltage amplitude to generate a light source between the two electrodes, which is the so-called gas discharge. The white super arc light produced by xenon can increase the color temperature value of the light, similar to the daytime solar rays, and the current required for HID operation is only three times brighter than that of traditional halogen bulbs, and the service life is 10 times longer than that of traditional halogen bulbs.

Advantages of Hernia Lights:

1.Power saving1 2, halogen lamps consume less than 60W of electricity, xenon lamps only need 35W of electricity.

2.Since xenon lamps do not have filaments, they do not have the problem of being scrapped due to broken filaments and have a much longer service life than halogen lamps, which are equivalent to the entire operating time of a car's average life cycle.

This is not going to happen. The advantage that distinguishes it from halogen lamps is that it does not use tungsten filament to emit light, and it will not burn out at all. It uses high-pressure conversion to activate xenon to produce brightness.

This is not possible, the use of xenon lamps is within the safe driving range, and xenon lamps are characterized by high brightness

Recommend EOS brand xenon lamp, installation does not need to break the wire, **on**shop, quality***!

Hello answer, I am a car consulting without regrets. I've seen your problem. We're putting together the information for you. It takes a little time to type. Please be patient. We will get back to you as soon as possible.

Kiss! I'm not a robot, please don't close the order, I'll be sure to get back to you as soon as possible.

Cold glue is used for headlamp encapsulation. Paste the protective film of the lampshade, the oven temperature is about 150-160 degrees, and bake for no more than 15 minutes at most. Cold glue is more difficult to disassemble.

Is there anything else you would like to consult? If not, please give me a 5-star thumbs up. You can also follow me. You can always consult me if you have any questions about the car in the future. I wish you all the best in your work and a happy life, thank you.