How do you make a funny origami box? How to make an origami box

First, fold the middle line of the colored paper in half. Then fold the left side in half to create a crease. Fold the lower corner of the right side to the intersection of the diagonals, and then fold the right edge to the left.

Fold the right side to the back and cut off the excess with scissors. When opened, it is a pentagonal shape, folded into a triangle according to the creases. Fold the right corner down and divide the corner equally.

I fold the small corner of the top side downward, and I fold the top one to the back. Then fold the top corner down. When everything is folded, it becomes a little star, and we use our fingers to spread it and it's done.

A4 paper, fold in half once, fold in half again, fold the 1 4 rectangle, show a triangle, the other side is the same, fold the triangle, turn over a layer of triangle and press it to the left, so that there are three layers of triangles on the left, and the next layer of triangles is folded to the right, turn it upside down, fold it along the middle line, fold it up with a layer of paper below, fold the paper in, so that the box has been basically formed, stand up, open up, press down, turn over, and reshape the four sides a little, and it will be successful.

First, take a square piece of colored paper, first fold the two diagonals of the colored paper in half and then reset. Then we fold the four corners in half towards the center dot and turn to the back of the colored paper. Let's fold the opposite corners inwards inward.

Then we fold the two sides inward in half, as shown in Figure 1. Pull up the bottom side, fold the upper corner to the inside according to the crease, and then we can do the same operation on the other side according to the method above, and the four-leaf clover carton is folded in this way.

Fold a square piece of paper in half. The corners are folded towards the midpoint. Fold the four sides at 1 3.

Open the left and right sides, and stand up at 1 3 on the top and bottom sides. The right side is also erected at 1 3 places. The top one is folded down.

The left side is folded like this, and the box is ready. To make a lid, the first two steps are the same. Place the box in the middle.

Fold the four sides according to the edge of the box. Well, the lid is one, isn't it beautiful?

Take a square piece of paper, fold it in half, open it and fold it in half, folding the four corners in half along the center point. Fold the two sides of the folded square parallel to the center, and fold the two sides in half toward the center when opened. Open the origami, flatten the small triangle in the middle, and squeeze the two triangles inward.

Fold down the inside of the box and press the same method on the other side.

Fold a useless rectangular piece of paper in half twice, first pull one side open and fold it down with the center line, the same is true for the other side, fold it in half along the middle line, fold it in half along the other side, fold it over the left and right sides in line with the middle line, and the same is true for the other side, fold the lower part of the triangle up, and then open the corners of the four ends in turn after folding, and fold it inward, so that it is more firm, and it can be opened after folding.

Take a square piece of paper, fold it diagonally in half, fold the lower corner in half with the center intersection, open, align the lower corner with the crease roll just now, open the left paper along the dotted line in the figure, and flatten it, and fold back the right triangle area of the flattened part. Open the part on the right side that has just been folded, fold the three corners towards the center, and then fold back on the right side, and the heart-shaped box is complete.

Just a piece of white paper, fold it in half, continue to fold it in half again, open a layer so that it is folded, and then fold it in half, and then fold it in half, and the other side is also folded in the same way, so that the short side is folded in, and the four short sides must be folded, folded, and the upper part is folded down, okay, it can be stored like this when you don't usually use it.

Take a rectangular piece of colored paper, fold it in half from the middle, and fold it in half again. Fold the corners down, opening from the middle along the crease, and the other side in the same way. Fold both sides towards the centerline, do the same on the other side, fold the extra part underneath upwards, open it from the middle, and tidy it up a little.

The steps for the origami box are as follows:

1. First of all, you need to prepare a piece of paper that you don't use.

2. Fold the paper in half and then open it.

3. Re-fold the paper from both sides of the folded crease.

4. At this time, the paper becomes a rectangle, turn the paper back and fold it in half again.

5. After getting one side done, according to the previous step, roll and defeat the other side.

6. Fold the excess part of the paper in half according to the ** show.

7. Turn the paper over and repeat the above steps on the other side.

The role of packaging cartons for storage and transportation:

Some products become commodities and eventually reach consumers, and there are objective factors such as transportation and storage in the field of circulation. All kinds of commodities are different in size and form, which will bring many inconveniences to transportation or storage, and packaging cartons can solve this problem, it can unify the size and specifications of goods, in order to facilitate the handling or quantity inventory in the process of storage and transportation or circulation.

1. Prevent the product from being damaged and deformed. Product packaging must be able to withstand various external forces such as shock, vibration, jolting, compression, friction and other external forces in the process of loading, transportation and storage, so as to form protection for the inner product and have a certain vibration resistance.

2 Prevent chemical changes in the product. In the process of circulation and consumption, the product is susceptible to moisture, mildew, deterioration, rust and chemical changes, which affects the normal use of the product. This requires that the packaging can play a role in blocking moisture, moisture, light and harmful gases to a certain extent, so as to avoid the adverse effects of the external environment on the product.

Preparation materials: a rectangular piece of colored paper, solid glue.

Step 1: First, divide the rectangular paper into three equal parts, as shown in the figure below.

Step 2: Then fold the corner of the upper left corner to the first crease of the field, and then fold the remaining part in half towards this corner to get the crease, and the other end is folded in the same way, as shown in the figure below.

Step 3: Then fold the diagonal lines of the small squares at both ends of the mark to create creases, as shown in the image below.

Step 4: Continue to separate the first side on the right, then fold the middle diagonal inward, and then fold back along the other diagonal, the left side is folded in the same way as the right side, and the celery base is a three-dimensional rectangle, as shown in the following figure.

Step 5: Then continue to fold the opposite side of the single layer inward, then flatten the opening, and then fold it down twice as shown in the figure below.

Step 6: Finally, you can paste the bow trinket on the finished box with solid glue, and the box made of origami is completed, as shown in the picture below.

Origami boxes are a fun craft activity, and here are the simple steps:

1.Prepare a square of colored paper, fold it diagonally and then excitedly.

2.Fold the left and right corners towards the middle so that the top forms a triangle.

3.Fold the bottom up so that the tip of the triangle aligns with the bottom.

4.Then fold the bottom of the left and right sides inward, touching the crease of the previous step.

5.Then lift the whole structure up and fold the bottom up again so that the bottom forms a complete square.

6.Finally, fold the skins of the four horn socks inwards so that they fit snugly against the bottom of the box.

Once the above steps are complete, you will get a simple origami box. You can use different colors and sizes of paper to make a variety of styles of boxes.

To fold the box beautifully, you have to fold every step to make it neat and tidy. For each crease, carefully align the corners and corners and then press the creases firmly.

At the beginning, folding colored paper in half along the diagonal and edge lines can be a good help for the later origami steps. You can glue or tape the last extra piece of paper to the bottom of the box to make it more comfortable. Fold another box of the same to make the lid.

If your paper is colored on one side, fold the side that is clearly colored on the outside.

paper

Also known as matte felt paper, it is made of raw materials containing plant fibers through pulping, modulation, copying, processing and other processes, and can be used for painting, printing books and newspapers, packaging, etc. Different from the glutinous fiber, the glutinous is the "silk" of animal fibers. It is possible to fold any piece of paper for writing.

Paper is a carrier for writing, printing, and can also be used for other purposes such as packaging, hygiene, etc.

Such as printing paper, carbon paper, toilet paper, tissue paper, etc., due to the invention and popularization of paper, human beings can no longer use mud, stone, wood, pottery, metal and other materials to record words or pictures, but also so that a large amount of ancient information has been disseminated and preserved. Paper: A general term for paper.

Paper is counted in sheets, so paper is generally divided into: letterpress printing paper, newsprint, offset printing paper.

Prepare a square paper, fold the paper symmetrically horizontally and vertically, fold it into a small square along the fold, then fold the triangle upwards, fold it symmetrically into strips along the bottom, and use the same method on the reverse side, and then turn the corners left and right to fold the triangle in the middle, and the sharp corners at the top are folded down, and finally open the carton, and the simple and practical origami box is folded.

1. Prepare a square piece of paper first, which can be determined according to the size of the box you need;

2. Fold the square horizontally and vertically symmetrically, and select a diagonal line to fold it into a small square;

3. After that, fold the triangle upwards, fold the triangle downwards and align with the crease in the middle, fold it symmetrically into strips along the downward, and use the same method on the reverse side.

4. Then turn the left and right, fold the corners to the middle of the triangle and align it along the central axis, and fold the four corners of the front and back, left and right

5. Finally, fold the top sharp corners downward, align with the bottom sharp corners, and open the carton from the middle.

How to fold the carton:1. First of all, take a square piece of paper!

2. Then fold it in half!

Leave a mark on the back!

3. Then answer with traces.

Printed as a guide! Fold the four corners in half - and then fold the two sides parallel to the inside!

4. Then follow the pointing of the arrow. Keep folding it in half!

5. Fold out the ** shown below!

6. Then fold it gently!

7. Continue until you see the figure below.

8. Enter the key step, now place your finger behind point A of the diagram, slowly lift it up, and follow the pattern in the diagram below.

9. So you fold out one side of the box.

10. Then the other side does the same thing.

11. Then fold the top corner into the box.

12. In this way, another side is made.

13. Then turn the box around and continue to make another side 14. Call it a day!