What are the specific practices of moisture proof and mildew proof indoor walls

Everyone knows that the room should not be too wet, otherwise, it will have a big impact on our ** and health, especially on the walls. As the largest area of the house, if it is damp, it will easily make the room smelly. So,Indoor wall moisture-proof and mildew-proof practicesWhat's in it?

Indoor wall moisture-proof and mildew-proof practices- Use dehumidifiers.

I believe this happens in many people's homes. The walls are damp. At this point, some monotonic agents and activated charcoal can be used to prevent moisture.

Indoor wall moisture-proof and mildew-proof practices- Moisture absorption.

It is possible to fuse moisture and moisture. When wet, it turns into water, which is then dehumidified with an air conditioner. Usually, air conditioners have a dehumidification function, but the effect is slow. It usually takes two to three hours for people to feel cold.

Indoor wall moisture-proof and mildew-proof practices—— Use lime and charcoal for dehumidification.

Put some lime in a small cloth bag, then tie it and place it in every corner of the house. In particular, this type of product has a hygroscopic effect, so it can reduce internal moisture and lime also has a disinfecting effect, while dehumidifying bamboo charcoal can be reused, but it is more useful. If it's not that effective, it won't be good.

Indoor wall moisture-proof and mildew-proof practices- Use some gadgets.

When molding on the walls, it is recommended to use a toothbrush, and then slowly clean with a moistened cloth, which will cause the walls to be neat and tidy, while avoiding the growth of mold. Bleaching powder and water can be used as a 1:99 ratio water reagent, they are poured into a water spray bottle to spray on the mold walls and also remove mold stains.

Indoor wall moisture-proof and mildew-proof practices- Close windows morning and evening to reduce humidity.

Everyone knows that humid air is very harmful on the walls, so first of all, it is necessary to prevent gases from entering the room, especially for some southerners, remember to close the windows of the house and not let the humid air enter the room. In the morning and evening, close the window on time.

6. Check in time, the water vapor on the wall is clear.

When it's wet, don't be lazy. Remember to check the humidity on the walls of your home. If you find that condensation has condensed on the wall, you must take appropriate measures to avoid unnecessary problems. Dehumidifiers, air conditioners, etc., which absorb moisture from the walls.

7. Moisture-proof latex paint.

First of all, we want to do a good job of basic dry putty, we should first brush the paint putty three times to paint the putty, just open the indoor ventilation putty will not reduce the moisture, if it is not the dry putty powder in the repeated putty or brush reproduction will cause sweat and even cracks in the wall in a large area.

8. Moisture on the decorative surface.

In the tiles, wall tiles, we can not let the decorative surface too dry, it can wash this with water, absorb water for about 30 minutes, mortar, and then the concrete adheres firmly, if the tile or tile wall must be soaked to reach a saturated state can be laid, but also pay attention to the impact of high temperature on the summer decoration details, which requires the team to build multi-layer and glued-laminated stone window frames, reduce the poor sealing, and avoid the future after two easy water.

If you want the indoor wall to avoid moisture, you should have a prevention of these things in the decoration.

Indoor wall moisture and mildew prevention practices must be cleaned when carrying out wall decoration: remove the base layer, use cement mortar, and keep the remaining shovel clean, as well as apply primers: primer coating roller (waterproof coating), heat load further, roller coating should be in the base coat suitable for hair water, to prevent the paint brush from diluting evenly.

After drying, putty is added, dried, polished with sandpaper and washed.

Indoor wall moisture-proof and mildew-proof practicesIn the decoration, we also need to pay attention to the application of mildew-proof and moisture-proof primers. Primer (true color) rollers coated with anti-mold evidence are an important step in the evidence of mold. The entire wall is coated with anti-mold paint to prevent mold and moisture.

If the mold is made from a wall, it can be applied directly to cover the surface of the colony.

The moisture-proof and mildew-proof practice of indoor walls is to clean the latex paint when brushing the paint: the painting sequence is to brush the wall, wipe the top of the board, and the wall is the first down. Start by cleaning the walls and wiping them down with a cloth.

Latex paint is polished with a pen. When using a new pen, remove floating and weak hair from the pen. Latex paint should be mixed well and diluted with water before use to prevent paint spillage.

After drying, wipe the surface with sandpaper and dry for 1 h (25).

Interior walls are moisture and mildew resistant practices in the second brush of paint: before the effect is very thick, stir the same requirements appropriately first pass, use the same should not be added to the water, to prevent the ends. After the paint or virtual drying, wipe the nib and small walls with a small sandpaper and then wipe gently.

Since the paint film is quickly dried, the brush line is coordinated with each other along the upper and lower brush lines, and the pen is immediately before the start time of the brush to prevent the brush line from gradually drying towards the joint to be operated quickly and continuously. The recoating interval is 6 h (25°C) and the relative humidity is adjusted to 85% or less during application.

When decorating, the waterproof layer is the first thing that everyone needs to pay attention to, to a certain extent, it can prevent water leakage from occurring, know how important the water throughout the room to waterproof installation and measure the thickness of the remodeling experience Please pay attention to.

The design style is also more important for the decoration, you should pay attention to the overall comfort and overall comfort in order to dress up the house. Of course, you have to listen to the special shirt of the house for ignition needs. Avoid controversy when you disagree with each other on the design because different people have different experiences when it comes to decorating a house.

Choosing household appliances, the perfect living room requires not only great care in painting and decoration, but also in the choice of appliances. For example, if computers and televisions are essential for every home at this time, you may need to choose a combination of décor styles.

As long as the decoration is done in accordance with the correct steps, the effect of the decoration will definitely satisfy you.

You can get it for free

1. Moisture-proof coating. The moisture-proof paint is applied to the wall, which can better penetrate into the wall, thereby increasing the moisture-proof and mildew-proof performance of the wall.

2. Wallpapers. The material made of natural materials is relatively strong, so it has a certain moisture-proof and mildew-proof performance, and the decorative effect of the wallpaper is relatively strong.

3. Waterproofing membrane. It is a flexible building material, and the waterproof effect is relatively good. Moreover, the waterproofing membrane has a wide range of uses, not only can be used on the highway, but also is very common in decoration, and it is not easy to break.

4. Plates. In the production process of the plate, more colloids will be added, so as to have a better moisture-proof function, and it will also bring better protection to the wall.

Precautions for wall decoration.

1. Ensure sufficient time for the maintenance period.

Just decorated wall, the maintenance period is 1 month, if the temperature is low in winter, the maintenance period needs to be extended later, often pour water on the wall with water, to ensure that the humidity during the curing period is below 10%, if you can not judge, you can use professional instruments to detect the humidity.

2. The iron nail head of the wall.

Secondly, when the wall is decorated, the exposed iron nails on the wall should be cut or knocked off, and the iron nail head should be treated with anti-rust.

3. Polishing the base surface plastering lap marks.

Then, if the overlap of the wall substrate is uneven, it will affect the flatness of the wall, and the substrate needs to be polished until it is flat before decoration.

4. The floating sand and lime sand on the wall need to be removed.

Before wall decoration, if there is floating sand or lime sand on the surface, it can be removed with a shovel, and the pits can also be repaired with similar materials for the sand hole on the wall. If it is found that the wall has a hollow drum phenomenon, only to remove the base layer, re-repair the putty to flat, if the wall crack is large, can only be repaired with mortar, and then smoothed.

The wall is really important to prevent mildew, and the wall should be moisture-proof and mildew-proof like this: using dehumidifiers, some monotonous agents and active agents can prevent moisture; The moisture-proof and mildew-proof indoor wall can also absorb moisture, that is, dehumidify through air conditioning; You can also use lime charcoal to dehumidify, put the lime and charcoal in a small cloth bag, and then tie it up and put it in every corner of the house.

The walls should be covered with cement, tiles should be pasted on them, and the waterproofing of the floor of the house should be done, and the sewer pipes should be drained smoothly, and the windows of the house should be opened frequently.

Buy an air dehydrating breather, it is like a vacuum cleaner, it can bring the wet air together, and when the humidity is too much, it will turn into water. Use air conditioner to dehumidify. Air conditioners used in homes generally have the function of dehumidification, but the method of air conditioning to dispatch indoor air humidity is slow, generally takes two or three hours, and will make people in the room feel cold.

1. Moisture-proof teaser liquid. Moisture-proof liquid, also known as moisture-proof coating, can penetrate into the wall very well, has the characteristics of moisture-proof and mildew-proof, and has the advantage that it will not turn yellow after long-term use, which is convenient for construction. 2. Wallpapers.

Generally, wallpaper is made of natural materials, so it has a very good breathing function, can play a moisture-proof and mildew-proof effect, and has a very high decorative effect. 3. Waterproof has a very high decorative effect. 3. Waterproofing membrane.

Waterproofing membrane is a kind of waterproof and waterproof penetration of flexible building materials, in addition to the application of indoor walls, can also be applied to outdoor roads, with water resistance and fracture resistance. 4. Plates. In the production process of the board, a lot of colloids will be added, so it has a certain moisture-proof performance and can protect the wall.