How to confirm the last pen identification code in Wubi typing?

When a word is split less than 4 symbols, its input encoding is: first type the code element code, and then add a "last pen font identification code", referred to as "identification code".

1. The composition of the "identification code": it is an additional code composed of the "last stroke" code and the "font" code. In the past, many people were afraid of "identification codes" because they could not be taught.

In fact, according to the following practice, you only need 5 minutes to learn: "1" type (left and right) type: after the code element is played, making up 1 last stroke is equivalent to adding the "identification code".

For example: Mu: 氵木, ("," for the last stroke, make up 1 ",") Ting: 氵丁丨 ("丨" for the last stroke, make up 1 "丨") sprinkled: 氵西一 ("一" for the last stroke, make up 1 "one").

2" type (upper and lower type) words: After the code element is played, the "code element" composed of two last strokes is equivalent to adding the "identification code". Example:

Hua: 亻匕十 (the last stroke is "丨", type 2, and the "type" is used as the "identification code") words: 宀子二 (the last stroke is "one", 2 type, and the "two" is used as the "identification code") Reference:

厶大彡 (the last stroke is "丿", type 2, and the "" is used as the "identification code").

3" type (heterozygous) type: After the code element is completed, the "code element" composed of 3 last strokes is equivalent to adding the "identification code". Example:

Same: 冂口三 (the last stroke is "one", type 3, and the supplementary type "three" is used as the "identification code") string: 口口丨 (the last pen is "丨", type 3, the supplementary type "" is used as the "identification code") country:

As for why these "strokes" can play the role of "identification code", you only need to carefully study the design of the area code and the definition of "identification code".

1. There is a special case when taking the identification code: when there are semi-enclosed words such as 辶, 囗, 廴, etc., although the last stroke is the last stroke of this semi-enclosed side, but when taking the identification code, it is not taken as the last stroke, but the last stroke of them is removed. For example, "even" to take the identification code to take k, "edge" to take v, if not, these two words will be duplicated.

However, there are other marginal words that are not in this column, such as: lotus takes u as the identification code, and bacteria take f.

Wubi Identification Code: The full name is Wubi Last Stroke Cross Identification Code.

The selection of the identification code is determined by the last stroke of the root of the Chinese character and the font of the Chinese character after the Chinese character is split. The order of entering the words that need an identification code is as follows: first type the root code, and then add an "identification code".

There are 5 basic strokes in Wubi, one (horizontal), 丨 (vertical), 丿 (apostrophe), (捺 and point), B (fold), these five strokes. Rules for determining identifiers:

1. The last stroke of each word must be the five strokes mentioned above.

2. Wubi divides the font into three structures: the left and right structures are identified by 1, the upper and lower structures are identified by 2, and the hybrid structures are identified by 3. For example:

The last stroke is "one", (left and right structure, identified by the first letter of the horizontal area, g.) The upper and lower structures are identified by the second letter of the horizontal area. The heterozygous structure is identified by the third letter of the transverse region d) and so on.

3. The horizontal area is GFDSA, the first three are the identification code 1G2F3D, the vertical area is HJKLM, the first three are the identification code 1H2J3K, the TrewQ area is TREWQ, the first three are the identification code 1T2R3E, the area is Yuiop, the first three are the identification code 1Y2U3I, the folding area is NBVCX, and the first three are the identification code 1N2B3V.

How to use the identification code.

First, consider the last stroke (last stroke) of the Chinese character system, so as to determine the area where the identification code to be added is located (horizontal, vertical, apostrophe, 捺, fold), and then consider the structure of the Chinese character (left and right, up and down, hybrid), so as to determine the position of the area where the identification code is added (the first, second, and third digits).

Such as: incense (root code tj). But under normal circumstances, the word "de" comes out. In order to play "incense", you need to add an identification code.

Since the end of the word "incense" is "one" (horizontal), it can be determined that its identification code is found in the horizontal area.

Secondly, since the structure of the word "incense" is "upper zhidao lower type", it can be determined that the identification code should be the second key (f) in the horizontal area.

Therefore, the complete code of the word "incense" is: tjf.

When there are less than four whole character roots entered by the Wubi input method, a "last pen identification code" needs to be added, and the input of two-character root Chinese characters and three-character root Chinese characters needs to add the last pen identification code.

The last pen identification code is a measure taken by Wubi font coding to reduce the repetition rate of Chinese character encoding

If the number of encoded letters is less than four, it is allowed to add a code at the end of the code of the Chinese characters with less than four characters;

Although the codes of Chinese characters based on the roots are the same, their last strokes are not necessarily the same; Even if the last stroke is the same, they don't have to be the same font. Supplementing the last pen identification code may make the original Chinese characters with duplicate codes not duplicate the code.

For example: 1. For example, the word "cypress", the way to play is SR, but SR is the secondary shortcode "analysis", so in order to distinguish, you have to add the identification code G. Therefore, the play style of "Kashiwa" is srg (the last stroke is one, and the left and right structures are also one, so it is 11, and 11 is g).

2. For example, "agent", the way to play is YJJ, but YJJ, if you don't add the identification code is the word "Qi", so, in order to distinguish, you have to add the identification code H, so the play of "agent" is YJJH (the last stroke is 丨, the structure is left and right is also one, so it is 21. And 21 is h).

identification code to come.

Meaning, after the word splitting is completed, there may be two or.

The corresponding key of the word split is still the same, which will constitute a duplicate code, and at this time it can be distinguished by the identification code, as far as possible to remove the duplicate code, so that each word has almost the only five strokes**.

The identification code determines the area according to the last stroke of a word, and then uses the font of the word itself to determine the position. Specifically, it is horizontal, vertical, apostrophe, point, fold five kinds of strokes, respectively, corresponding to five areas, the font is divided into left and right type, up and down type, heterozygous type, respectively, corresponding to the number. The identification code determines the key position by the area and the font, taking the word "plus" as an example, the last stroke is horizontal, belonging to the 1 area, the font is the left and right type, is 1 digit, and the identification code is 11 keys, corresponding to the letter G.

The five regions correspond to the five types of stroke region keys starting with the letters g, h, t, y, and b, and each region contains five keys corresponding to these types of strokes. The identification code needs to use 3 digits, and the following is a list of key points corresponding to the specific strokes and font identification codes.

The full name of the five-stroke identification code is the five-stroke last stroke cross identification code.

The function of the identification code is to distinguish between Chinese characters composed of different root contents on the same key within the phase, or Chinese characters with the same root but different structures. How to use First consider the last stroke (last stroke) of the Chinese character, so as to determine the area where the identification code to be added is located (horizontal, vertical, apostrophe, 捺, fold), and then consider the structure of the Chinese character (left and right, up and down, heterozygous), so as to determine the position of the area where the identification code is added (the first, second, third).

Such as: incense (root code tj). But under normal circumstances, the word "de" comes out. In order to play "incense", you need to add an identification code.

Since the end of the word "incense" is "one" (horizontal), it can be determined that its identification code is found in the horizontal area.

Secondly, since the structure of the word "incense" is "up and down", it can be determined that the identification code should be the second key (f) in the horizontal area.

Therefore, the complete code of the word "incense" is: tjf.

Wubi Identification Code: The full name is Wubi Last Stroke Cross Identification Code.

The identifier refers to each word structure and the last stroke. For example, the last stroke of a word is horizontal, this word is a left and right structure to hit G, up and down structure to hit F, other structures to hit D. The same goes for the others.

A bai Chinese character in the Wubi input method is generally composed of four characters du root zhi, and less than four character roots are supplemented with a special identification code behind the dao. The identification code is composed of the genus of the Chinese character and the last stroke, and the Chinese character font can be divided into three types: left and right, upper and lower, and heterozygous.

Therefore, the following identification code is constructed: left and right type (1) upper and lower type (2) heterozygous type (3) horizontal 1g (11) f (12) d (13) vertical 2h (21) j (22) k (23) apostrophe 3t (31) r (32) e (33) 4y (41) u (42) i (43) fold 5n (51) b (52) v (53).

It is the last stroke of each word, see what the last stroke of this word is, if it is a horizontal, then its identification code must be in a district, and so on, the tree is in the second district, the apostrophe is in the third district, the wax is in the fourth district, and the fold is in the fifth district! Then look at the structure of the word, if it is left and right, it is on the 1 key, for example, the word of the last pen identification code on these keys must be the left and right structure, then up and down is, fold is, understand? Thanks for adopting!

For those Chinese characters that are less than 4 yards, add an identification code after the source code of the Chinese characters! There are five cases of the last stroke of a Chinese character, three cases of the glyph (i.e., structure) of a Chinese character, and 15 cases of the identification code of a Chinese character, as shown in the table above. Hope my answer helps you!

That's what the last stroke of the word is. Horizontal and vertical skimming. Select the last pen identifier based on the last stroke. If the last stroke is horizontal. Left and right structure. It's g

Identification code: In the Wubi input method, it is used to distinguish the last stroke and font structure of the double code word (Chinese characters with less than four codes).

Its function is: to reduce duplicate codes and improve the speed of entry.

Last pen font identifier.

About the last stroke: In order for the identification code to have sufficient distinguishing ability, except for the hybrid structure with the side "廴辶", the last stroke of the Chinese character refers to the part that is surrounded (only for the hybrid structure), and the last stroke refers to the last root of the Chinese character.

Example: "The last stroke of the pen is (horizontal); The last stroke of "Liao" is (vertical);

The last stroke of "ripple" is (捺); The last stroke of "lotus" is (捺);

The last stroke of "load" is (vertical); The last stroke of "cause" is (捺).

Font structure (divided into three types):

Left-right structure (including left-center-right structure).

Upper and lower structures (including upper, middle and lower structures).

Heterozygous structure (the rest is heterozygous).

Schematic diagram of the structure of the five-stroke font:

Font formula: left and right type 1 up and down 2, cross single body surrounded 3.

Two or three roots are needed, and a single root is a word, don't bother!

Last Stroke Identification Code Formula:

Who is in which area at the end of the pen, and then look at the glyph code;

This generates a location code that points to Yes.