How to decontaminate the plastic wood grain floor, and how to wipe the plastic floor to make it clea

1. Keep the floor dry and clean, and avoid contact with a lot of water. It is not allowed to scrub with corrosive liquids such as alkaline water and soapy water to avoid damage to the paint film, and it can be wiped with a wrung out cotton mop, not with a wet mop, gasoline, flammable materials and high-temperature liquids.

2. Waxing every once in a while, the time interval depends on the finish of the floor paint. The method is to first wipe the floor with a semi-dry rag and wax it. To spread evenly and "soak" the floor surface, wait for it to dry a little and then wipe it back and forth with a soft cloth until it is smooth and translucent.

3. If you accidentally pour water or leave water on the ground, you must wipe it with a dry soft cloth in time. After wiping it clean, do not directly expose it to the sun or bake it on an electric stove, so as not to dry too quickly and the floor will dry and crack.

4. Do not throw cigarette butts or matches and other kindling on the floor to avoid scorching the surface of the floor; Avoid sharp, sharp objects, scratches, and heavy objects that are pressed for long periods of time.

5. After paving, the floor should be exposed to direct sunlight as much as possible, so as to avoid excessive ultraviolet radiation of the paint and early cracking and aging.

6. If the paved floor is not inhabited for a long time, it is necessary to open the window frequently for ventilation, and do not cover it with plastic sheets or newspapers. Over time, the paint film will become sticky and lose its luster. At the same time, do not directly contact the floor with objects with high temperatures, if the indoor air humidity is lower than 40, you need to increase the temperature appropriately, if the humidity is greater than 100, you need to take dehumidification measures.

You scrub back and forth with a damp towel first, and then use a dry towel to wipe it off. The surface of the plastic wood grain floor is a wear-resistant layer, which is pressed with high temperature and high pressure, and there is no problem with scrubbing!

How to wipe the plastic floor to be cleaner: how to deal with the special dirt of PVC plastic flooring: 1

Oil stain: local oil stain, pour the water-based degreaser stock solution directly on the towel to wipe it; For large areas of oil, dilute the water-based degreaser at 1:10 and clean it at low speed with a floor cleaner and red grinding discs.

2.Black offset printing: Polishing with spray cleaning wax with high-speed polishing machine and white polishing pad.

For long-lasting vinoffset printing, you can pour a strong vinoffset remover directly onto a towel to wipe it off. 3.Gum or chewing gum:

Use a professional strong adhesive remover directly onto a towel and wipe it off. 4.Detergent:

Water-based degreaser, spray cleaning and maintenance wax, strong black offset remover, strong adhesive remover.

When the plastic floor is damp for a long time, the temperature changes greatly or the construction is not standardized, wrinkles are easy to appear. If not dealt with in time, it will not only affect the beauty of the ground, but also may have potential safety hazards. Next, I will introduce the treatment method of wrinkles on plastic flooring.

1.Exposure to the sun.

Move the excessively humid floor to the open sun to let the floor dry naturally, and if the ambient humidity is high, you can also use a fan to enhance air drying.

2.Extrusion process.

In the wrinkles, squeeze the floor with a large weight and hold it for at least 24 hours, and the heavy object can choose a hard and heavy object such as an iron trowel to achieve the initial wrinkle removal effect.

3.Hot ironing.

Use a hot iron for hot ironing, place the hot iron on a clean white cloth, adjust it to 50-60 degrees Celsius, cover the cloth over the wrinkles and turn it over, and the ironing time in each place does not exceed 30 seconds, which can quickly eliminate wrinkles.

4.Reinstall the floor.

If none of the above methods can solve the wrinkle problem, it is recommended to reinstall the floor, because the site and installation details will directly affect the flatness of the floor.

Finally, it is necessary to remind everyone that in the process of dealing with the wrinkles of the plastic floor, it is necessary to pay attention to safety at all times, pay attention to prevent electric shock, fire and other accidents, especially during the construction process, be sure to maintain ventilation.

Wipe directly on the floor with a rag dipped in rice water, or spray the rice water evenly on the wooden floor (not too much), and wipe with a dry rag for 5 minutes, you will achieve quite satisfactory cleaning results.

Self-formulated lotion. Mix 450 grams each of soft soap, bleaching earth, baking soda and 2270 ml of water in a large pot, bring them to a boil and boil to half of their original volume, then cool and store in a jar for later use. Brush the floor with a hard brush dipped in this liquid, usually along the lines of the floor, and then wash and dry with hot water.

Salad oil, milk and tea. When mopping the floor, add a few drops of salad oil to the water to make the floor very shiny. Or use sour milk with a little vinegar, which can not only remove the stain, but also polish it very brightly.

In addition, the dirt on the painted floor can be wiped off with strong tea juice. It is also easy to remove the stain by wiping the smudge on the kitchen floor with burnt honeycomb soot and then mopping the floor with a sprinkle of vinegar on the mop.

When cleaning the wooden floor, first use a mop to remove the dust on the surface of the floor, and then dilute an appropriate amount in a bucket of water according to the ratio of detergent and the degree of dirtiness of the floor, and soak the mop to mop the floor from the inside of the room to the door. However, it is important to wring out the mop as much as possible to prevent too much moisture from penetrating into the inner layer of the wooden floor, causing mold and rot.

If you encounter a difficult place to clean, such as a crack in the floor or a corner of a wall, you can use an old toothbrush to brush directly with floor cleaner, or you can pour the cleaner on a rag to wipe the floor. However, some floor cleaners have a higher concentration of surfactants, which makes semi-wet floors more likely to get dirty after mopping. Therefore, it is best to choose a quality floor cleaning product.

If you want your floors to stay shiny for a long time, you can also apply a layer of wood floor wax after using a floor cleaner. However, be sure to wait for the floor to dry completely before applying wax, so as not to completely adhere to the wax layer, so that little by little white spots appear on the floor.

Wood flooring is a very popular floor pavement material, and its natural texture and beautiful appearance have become the choice of more and more families. However, if the wooden floor is not well maintained, over time, it will leave dirt and dust in the wood floor texture, which has a very bad impact on the appearance.

To clean the dirt in the texture of the wooden floor, it can generally be done through the following steps. First of all, use a vacuum cleaner or mop to clean the surface of the wooden floor before cleaning to remove debris and dust. Next, take some soft brushes and cleaning solution and gently scrub the dirt from the wooden floor.

The cleaning solution can choose some of the best wood floor cleaning and curing agents on the market. Finally, wash it with clean water and dry it with a rag.

If there is a very stubborn dirt left in the wooden floor, you can try to use a hard brush (such as a wire brush) to slowly grind it off, but be careful not to damage the surface of the wooden floor. At the same time, you can also consider using professional cleaning tools, such as wood floor waxing machines, for deep cleaning. It is advisable to avoid using chemicals or acidic solutions to clean wood floors, etc., which may cause surface damage or color differences.

Overall, to keep your wood floors beautiful and durable, they need to be cleaned and maintained regularly. Of course, it is recommended to avoid leaving too much dirt and debris on the wooden floor as much as possible in ordinary use, and clean it up in time to prolong the service life of the wooden floor. <>