How to pave plastic flooring, how to pave plastic flooring

Plastic flooring is an environmentally friendly, non-slip and easy-to-clean floor material, which is suitable for a variety of occasions such as home, commercial and public places. The following are the steps for paving plastic flooring:

1.Preparation: First of all, you need to clean the ground to ensure that the ground is flat, dry, and free of dust and oil and other debris. If the ground is uneven, it needs to be sanded or professionally treated.

2.Measuring size: Measure the size and quantity of plastic flooring according to the size and shape of the room to ensure the effect and aesthetics of the pavement.

3.Paved flooring: The plastic Zhili plastic floor is paved on the ground, which can be done dry or wet. Dry laying is to lay the floor directly on the ground, and wet laying is to apply glue to the back of the floor and then paving it on the ground.

4.Cutting the floor: If you need to cut on the floor, you can use a cutting tool to make sure that the size and shape of the cut matches the size and shape of the room.

5.Installing floor corner lines: Installing floor corner lines at the edges and corners of the floor can increase the aesthetics and stability of the floor.

6.Clean the ground: After the paving is completed, the ground needs to be cleaned to ensure that the ground is clean, tidy, and free of dust and oil and other debris.

It should be noted that the flatness and dryness of the ground need to be paid attention to when paving plastic flooring, so as to avoid problems such as blistering and cracking of the floor. At the same time, it is necessary to choose a high-quality, environmentally friendly, non-slip and easy-to-clean plastic floor to ensure the paving effect and service life.

<> plastic flooring is a very popular floor material, which has the advantages of non-slip, waterproof, easy to clean, etc., and also has high durability and aesthetics. Here are some steps for plastic flooring:

Preparation: The ground needs to be cleaned, leveled and dried before paving to ensure the effectiveness and quality of the paving. You can use an electric hammer or other tool to remove debris and bumps from the ground, and then clean the surface of the floor with a clean mop or suction bypass dust collector to ensure that the ground is dry.

Marking: Use plaster lines or other tools to mark the ground, determine the direction and location of the pavement, and then measure the dimensions of the ground to calculate the number of floors required.

Laying the floor: Starting from one side of the room, lay the floor on the floor, trying to keep the gaps between the floors even. It is important to note that the floor must be kept at a distance from the walls to allow for the expansion and contraction of the floor.

Cutting the floor: When paving to the edge of the room, you need to use tools to cut the floor to ensure that the floor fits the edge of the room.

Complete the installation: After completing the floor paving, you need to clean the floor and then observe whether the floor surface is flat. If there is a bulge or blistering, it needs to be repaired promptly. Finally, a protective agent can be applied to the surface of the floor to increase the durability and aesthetics of the floor.

It should be noted that when paving plastic flooring, it is necessary to choose the appropriate adhesive and operate according to the rubber installation instructions provided by the manufacturer to ensure the paving effect and quality.

Plastic flooring is an environmentally friendly, non-slip and easy-to-clean floor material, which is widely used in hospitals, schools, shopping malls and other public places and home decoration. The following are the general plastic floor paving methods:

1) Ground treatment: Before installing the plastic floor, the ground needs to be treated. The floor should be kept dry, level, and clean, and if there are uneven areas, they need to be trimmed. If there are other flooring materials on the ground that need to be removed, make sure the floor is level.

2) Laying the bottom layer: Laying the vertical plastic floor needs to lay the bottom layer first. The bottom layer can be used to select moisture-proof paper, environmentally friendly floor mats and other materials. The bottom layer should be laid flat and firm, avoiding bulging and loosening.

3) Carry out trial paving: Before the formal paving, it is necessary to carry out trial paving to ensure the laying effect and construction quality of the floor. During the trial laying, the floor needs to be cut into a suitable size according to the size and shape of the floor.

4) Pasting: When pasting plastic flooring, you need to choose a suitable adhesive and follow the instructions for construction. The adhesive should be applied to the ground, then the floor is laid on top and the floor is flattened with a tool to ensure a perfect fit between the floor and the floor.

5) Entering the remaining land Wang line treatment: After the laying is completed, it needs to be processed, and the excess floor is cut to complete the paving of the ground.

It should be noted that the installation of plastic flooring needs to pay attention to the ambient temperature and humidity, and avoid construction in a high temperature and high humidity environment. At the same time, the ground needs to be treated before laying to ensure that the ground is flat, clean and dry, and to avoid problems such as loosening and falling off.

The paving method of the plastic ground mu shed lifting board is such as and excited:

Preparation: Confirm that the floor needs to be leveled and dusted, and check whether it meets the wall slit line standard before laying. This is the basis for determining the direction of installation in the arc, vertical, and elastic structure.

Paving: Take the plastic floor out of the container and splice the pavement on the ground. According to the actual Centib needs to be cut and scrapped, the bottom of the starting edge needs to be left with 4 mm of insulation barrier, which can be matched with the wooden floor after being attached to the wall for more than 10 mm.

Fixing: Use special high-strength adhesive glue and other products to evenly coat the plastic floor into the treatment scope. Different types of different techniques are also different, idle anti-slip mats can be tightened or flattened by tightening the belt, and the diamond-shaped positioning method is selected for the oblique grid arrangement.

The following steps are required for the pavement of plastic flooring:

Preparation: First of all, you need to check whether the ground meets the requirements, whether it is flat, dry and clean. If the ground is uneven, it needs to be repaired. If there is moisture on the ground, it needs to be evaporated.

Cutting floors: Depending on the size and shape of the room, choose the appropriate length and width of the floor. Use a cutter or knife to cut the floor into the desired shape and size.

Install the baseboard: Install the baseboard and remove the protective film from the baseboard. The baseboard needs to be installed in the dark corner of the wall to ensure that the baseboard in the corner of the wall is naturally connected.

Paving the floor: Place the floor flat on the ground and fix the floor to the ground with a screwdriver. Use screws to secure the floor to the ground, paying attention to the spacing of the screws and the thickness of the floor.

Adjust the floor: Check whether the floor is flat, if there is unevenness, you need to adjust it. Use a hammer or screwdriver to gently tap the floor to level it out.

Fill the gaps: Use a professional caulk to fill the gaps between the floors. Make sure the caulk is similar in color to the floor and is flat.

Cleaning and acceptance: After the pavement is completed, clean up the debris and dust on the ground and floor surface. Accept whether the floor is installed correctly, the surface is smooth, and there are no quality problems such as cracks and blistering.

It should be noted that when laying plastic flooring, it is necessary to use professional tools and materials, and to follow the correct installation method. If you are not sure how to install, you can consult a professional pavement worker or customer service of a plastic flooring brand.

The steps for laying plastic flooring are as follows:

1.Prepare tools and materials: flooring kits, glue, floor cleaning tools, pencils and blades, etc.

2.Check the floor: Check if the floor is flat, dry and undamaged. If there are any problems, they need to be addressed.

3.Clean the floor: Use a vacuum cleaner or broom to remove dust and debris from the floor. Then, use a floor cleaning tool and clean water to clean the floor thoroughly.

4.Measure and cut floors: Use a pencil and blade to measure travel and cut floors. Make sure the floor matches the size and shape of the room.

5.Determine Installation Direction: Determine the direction and sequence of the flooring. In most cases, paving the floor along the long side of the room will make the room look more spacious.

6.Apply glue: Use a roller brush or brush to apply the appropriate glue to the ground.

7.Flooring: Flooring is laid on the ground in a predetermined direction and sequence.

8.Use clamps to fix the edges and corners of the floor: Make the dismantling of the width of the tong to fix the edges and corners of the floor with clamps.

9.Install the baseboard and doorway panel: Install the baseboard and doorway plate as needed.

10.Inspect and clean the floor: Check that the paved floor is flat and has no loose or crevices. Finally, wipe the floor with a damp cloth and remove excess glue and dirt.

The following steps are required to install plastic flooring:

Cleaning: The first thing to do is to make sure that the floor is clean, dry and level, as any obstacles and dirt will affect the quality of the flooring. Use a vacuum cleaner or damp mop to clean the floor thoroughly and eliminate any floor irregularities with particles.

Layout: Decide on the way and direction of the plastic flooring. In some cases, this ridiculous energy means that the floor needs to be laid at different angles along the wall to suit the specific space needs.

This may require multiple measurements and markings in order to get a perfect row of cloth during the laying process.

Preparation: To start the front beam early also need to leave the required corners, gaps and damping materials. According to the manufacturer, pressing the shock-absorbing material prevents the formation of pedaling sounds, making the floor quieter, softer and more stable.

There is a gap of about 1 4 inches from the door frame to accommodate floor paving and expansion.

Paving: Start gently holding the floor with your hands and extending it through the corner where you started to lay it. The strength should be even and firm until all floors are laid.

At each corner and corner of the wall inside the floor needs to be trimmed, if necessary, under the floor the grating required to subtract the length until it is far from the position. After finishing, it is recommended to wash the surface again (it can be gripped or ashed).

In this way, you will be able to successfully install the plastic flooring!

Plastic flooring can be done by following these steps:

Prepare for God's rotten work: First, clean the ground, making sure it is flat, dry and clean. If the ground is uneven, it can be trimmed with self-leveling cement. If the ground is wet, you can apply moisture-proof treatment first.

Measurement and planning: Measure the dimensions of the room, determine the starting point and direction of the pavement. Based on the measurement results, calculate the required amount of flooring, leaving an appropriate margin for the edges.

Laying the base layer: If the ground is hard, you can directly lay plastic flooring on the ground. If the ground is soft, you can first lay a layer of floor base, such as plywood or MDF, to increase the stability and support.

Laying floors: Starting from the starting point, gradually lay the floor in the planned direction. Stitch the flooring together to ensure that the edges fit snugly and avoid gaps and uneven sections.

For the pasted plastic flooring, use special floor adhesive to paste the line. For lockable plastic flooring, follow the instructions for locking.

Cutting and trimming: Cut the floor with a suitable tool, such as a saw or cutter, as needed, to fit the shape of edges and obstacles.

Laying edges and transition strips: At the edge of the floor and in the transition area, install suitable edge strips or transition strips to enhance aesthetics and protect the edge of the floor.

Cleaning and maintenance: After laying the plastic floor, use a mop or damp cloth to clean the surface of the floor to ensure that the floor remains clean and shiny. Avoid using excessively aggressive cleaners to avoid damaging the floor.

When laying plastic flooring, you can refer to the installation instructions and recommendations for specific products to ensure the correct paving method and the best results. If you encounter a complex installation situation or are unsure of how to pave it, it is recommended to consult a professional flooring installer or technical support from the manufacturer.

Plastic flooring is a new type of floor decoration material that is environmentally friendly, durable and easy to clean, which is suitable for homes, cosmetics stores, exhibition halls, medical reform and excavation temples and schools. The following are the steps for paving plastic flooring:

1.Cleaning the foundation floor:First of all, check whether the foundation ground is flat, and if there are unevennesses, self-leveling concrete or cement slurry should be sanded. Then clean the floor, making sure it's clean.

2.Extended Foundation Ground:Ensure that the foundation ground is hollow and small, the expansion joints should be uniform, the width should not be less than 4mm, and the depth should not exceed 2 3.

3.Positioning:Draw horizontal and vertical lines on the ground as required to determine the direction of laying.

4.Making environmentally friendly substrates:Moisture-proof paper, environmentally friendly substrate or special cushion are laid on the foundation floor in turn to increase the compactness and natural elasticity.

5.Installation of plastic flooring:Use the right-angled tool to arrange the floor, cut it to size, and then use the connecting strips to join the floor together and fix it horizontally and vertically.

6.Trimming:According to the requirements of on-site use, the glue fixing parts are fixed at the edge of the floor tile, and the on-site laying is recommended to be laid continuously as much as possible.

Finally, the paved plastic floor should be kept clean and safe on site, ensure environmental protection and cleanliness, and ensure that each operation step completes the degree of standardization. If you have no experience in paving floors, it is recommended that you hire a professional to pave them. Scattered.

Plastic flooring is a kind of ground pavement material often used on the market, which is suitable for all kinds of places: such as gymnasiums, schools, hospitals, office buildings, hotels and so on. Plastic flooring has a long service life, waterproof, non-slip, anti-wear, easy to clean, and environmentally friendly and odorless.

Pay attention to the following points when paving:

Step 1: Preparation.

1.Before paving, the size of the floor needs to be carefully measured, and then the appropriate length and width of the plastic floor should be cut in a timely manner.

2.If the ground is uneven, you need to use a grinder, brush, etc. to reduce the difference between the height of the ground and ensure that the ground is flat.

3.Before paving, place the plastic floor in a cool place and naturally flatten it for a period of time to avoid warping or deformation during paving.

Step 2: Paving process.

1.Lay the base adhesive on the floor. The bottom layer of adhesive should be evenly distributed and the thickness should not exceed 2mm.

2.On the bottom layer of adhesive, the CAPTCHA plastic floor. The plastic floor is laminated with the bottom glue, and the extension of each part should be connected with the gradient of the wall or the same type of ground, and the ground should be smooth.

3.If the plastic flooring needs to be cut, use a cutter to cut it to the desired size. In general, parts with special requirements, such as sharp corners, need to be treated with special tools.

4.After the flooring is installed, the surface of the floor needs to be cleaned with auxiliary tools (rags, erasers, etc.). Do not use any cleaning utensils that contain rough substances.

Step 3: Completion and acceptance.

1.After laying, before placing heavy objects such as chairs and tables, the plastic flooring should be reviewed to ensure that there will be no cracks, blisters, gaps and other phenomena.

3.Care should be taken during use to avoid impact, friction or sharp objects damaging the surface, and it is not advisable to discard cigarette butts or other sharp objects on the floor.

4.Avoid using acidic or alkaline detergents to clean the plastic flooring to avoid causing damage to it.

This article introduces the paving method of plastic flooring in detail. If the above methods are followed, the paving effect can achieve the desired effect, and at the same time, it can better protect the floor and increase its service life.