How to zero the maintenance lamp of Lavida 2o12 1 4, t

Maintenance lamp zeroing method.

One. Use the car computer detector to zero the maintenance lamp.

Two. Manual zeroing by method:

1. Press down and hold the zero button "A" and press the brake at the same time.

2. The ignition switch is twisted to "on", do not start the car.

3. The character "INSP" will flash or the display will flash.

4. Continue to press down the zero button "a" until "...appears on the display.

5. Release the zero button "A" and release the brake.

6. The ignition switch is twisted back to the "off" state. The zeroing work is over.

Three. Go to the settings menu, the vehicle menu, select Oil Life, Reset to Zero.

Lavida's maintenance lamp zero method: the first step is to turn off the electric door key, and wait for all the lights on the dashboard to go out. Step 2: Press the one on the right side of the dashboard with your left hand and open the electric door with your right hand without starting.

Keep pressing it, and it will go out automatically. Lavida's maintenance lamp zero method: the first step is to press the button on the left and press the jump of the maintenance lamp.

Hello, you can reset it through the multi-function button of the steering wheel, press the OK button to operate according to the instrument prompt.

I hope mine is helpful to you I wish you a happy car If you still have questions, please invite [car questions, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The vehicle is turned off, the headlights are turned off, the key is inserted and rotated to the power-on state, press and hold the reset dark button (the pillar in the lower right corner of the display) keeps holding down the rotation key to power off, pull out the key, wait for about ten seconds The display screen will automatically turn off (black screen) Note: The display screen will never be black when the headlight is turned on, let go of the button after the black screen, press and hold the reset button again, insert the key to rotate and power on (the alarm is still in at this time), keep pressing and holding the reset button until the icon alarm stops, let go of the button, and turn off the power again, Power on again without any operation, you can see that the alarm disappears, and you're done.

You have to have a microcomputer, otherwise you can only go to a 4S shop or repair shop.

Tai Na Hunger Pingyang Automobile Network] 1Turn off the ignition. 2.Press and hold the button on the dashboard. 3.Turn on the ignition and keep holding the "button" with your left hand. 4.When zero is displayed on the dashboard display, release the button to do so.

1.Turn off the ignition. 2.Press and hold the button on the dashboard. 3.Turn on the ignition and keep holding the "button" with your left hand. 4.When zero is displayed on the dashboard display, release the button to do so.

Many cars have a maintenance prompt function, after maintenance, you can let the technician in the 4S store use the diagnostic computer to clear the car's maintenance tips, or you can operate the reset button yourself to clear the zero.

Different brands and different models have different operation methods, if you don't know how to clear your car, you can refer to the manual.

The maintenance light can be set directly to the number of kilometers, for example, if you want it to light up 5000 kilometers, then after this maintenance, when the maintenance is reset, directly set 5000 kilometers, then when you drive to 5000 kilometers again, the light will turn on, this setting method The owner can basically see it every time, and it will light up every time.

The maintenance lights can also be set by the trip computer, depending on the vehicle. The mileage driven, time, driving road conditions, usual load size and other factors to judge the life of the engine oil, when the low consumption base returns to a certain set value, the maintenance reminder light will be lit.

Pacific Automobile Network] 1Turn off the ignition and turn off the ignition. 2.

Press and hold the right-click (Back to Zero Adjustment) button on the dashboard. 3.Keep your left hand holding down the right button while turning on the ignition.

4.With your left hand, keep holding the "Return to Zero Adjustment" button until the maintenance light enters reset mode, then release the right button (Return to Zero Adjustment button). 5.

Within 20 seconds of releasing the right button, press the left button "Menu Button" once to confirm the reset.

Old Lavida (2010-2017 model) maintenance lamp to zero:

1.Turn off the ignition and turn off the ignition.

2.Press and hold the right-click (Back to Zero Adjustment) button on the dashboard, the button position is shown in the image above.

3.Keep your left hand holding down the right button while turning on the ignition.

4.With your left hand, keep holding the "Return to Zero Adjustment" button until the maintenance light enters reset mode, then release the right button (Return to Zero Adjustment button).

5.Within 20 seconds of releasing the right button, press the left button "Menu Button" once to confirm the reset. According to the above process, the maintenance interval indicator will be cleared and restored to the normal display mode. 2018 Volkswagen Lavida maintenance lamp to zero:

1.Turn off the ignition. (Flame-off).

2.Press and hold the button on the dashboard, and the button position is shown below.

3.Turn on the ignition and keep holding the "button" with your left hand.

4.When one of the following messages is displayed on the dashboard display, release the "button". Are you sure you want to reset the data for your service service? Are you sure you want to reset the data for the Vehicle Check service?

5.Press the button again to confirm. (One press is all it takes).

6.Check that the maintenance light has been zeroed out, if not you have to start from scratch.

Photo by Pacific Automobile Network Q&A).