Calculation method and practice of titanium magnesium alloy bathroom swing door

Calculation method of titanium-magnesium alloy bathroom swing door: the length of the door, the width of the door, the unit price (x yuan square meters) the total amount.

Practice: production: profile correction, lofting and cutting, cutting and cutting, drilling and assembly, production and handling.

Installation: on-site handling, installation, correction of frame fans, planting glass, hardware accessories, peripheral plugs, cleaning, etc.

Hardware accessories. 1) Door locks. There are five types of single-tongue ordinary door locks, double-tongue ordinary door locks, single-tongue button door locks, single-tongue button tongue door locks and double-tongue tongue door locks.

2) Aluminum alloy handle. It is a handle made of aluminum alloy, and there are three kinds of bow handles, bottom plate handles, and pipe handles.

3) Door plugging. There are two types: ordinary type and closed type, which play the role of fixing the door to prevent the door from being blown open by the wind.

4) Door hinges. A device or part used to connect two parts of a door that can rotate freely around the axis of the hinge.

5) Screws. A part with threads on a cylindrical or conical metal rod, also called a screw or screw.

The minimum swing door is calculated according to square meters, and the hanging trip * sliding door is divided into single-track single leaf minimum square meter, double-track double leaf is calculated according to square meter, double.

Learned, yes, it makes too much sense.

The size of the bathroom aluminum-titanium magnesium door is generally 2100*900mm, and the thickness is generally about the same.

The size of the bathroom door needs to be selected according to the measurement of the bathroom door opening, and the upper, middle and lower three places of the door opening should be measured to see whether it is common, if it is not common, the narrower part shall prevail, but the error shall not exceed 20mm. For the error of 20mm, the wall hole should be corrected, and the correction can be carried out with cement mortar or lime.

If there are steps between the bathroom and the outside, the height of the steps should be added to the sleeve of the side with the steps, and the detailed size will be determined according to the height of the steps. When measuring, it is also necessary to pay attention to the opening direction of the bathroom door, which is defined as: from the front of the door, the hinge is open on the left and the hinge is open on the right.

The bathroom door is generally connected with the door and the door sleeve together, the general thickness of the door sleeve is 3 to 5 cm, the 2 sides are 6 to 10 cm, the width of the bathroom door is at least 600mm, generally about 700mm, and the width of the bathroom door opening of the general rough room is about 700mm, which can be appropriately widened. Bathroom doors should not be too large and will take up a lot of space.

The size is generally 2100*900mm, and the thickness is generally between, and the doors sold on the market are basically of this size. In fact, there is no specific size standard for the bathroom door, mainly depending on the door opening at home and the setting of the bathroom.

If the door is open inward, the size of the sink should be smaller. If the bathroom door is intended to open outward, you don't need to consider the size of the bathroom, but it takes up more space in the hallway. It takes up more space to open the meeting outward, so it is recommended to choose a sliding door, or you can choose a folding door, the opening of the folding door is about 80cm wide.

Nowadays, the door is generally connected with a door sleeve, the thickness of the door sleeve is 3-5cm, the two sides are 6-10cm, and the width of the bathroom door is at least 60cm.