How to modify the positioning of iosipad

Method steps.

After the backup is completed, click "Full Backup File Management" in the "Backup and Recovery" interface in the figure above, find the data you just backed up, and click "View Now" after selecting it.

Then open Library Preferences in turn, you can see the files inside, double-click to open;

The following interface pops up, drag the page to the bottom, and see two lines**.

And. Write the following ** on these two lines: internal placecardlocationsimulation

The above ** can be copied and pasted directly, aligned with the figure below; After the modification is completed, click "Save" in the upper left corner;

Next, just restore the modified backup to your phone; Click "Restore Full Data" on the "Backup and Restore" interface, select the backup you just modified, click "Restore Now", wait for the progress bar to complete, the phone restarts, and you're done; Open the map of the phone to search for the address you want to view, the option of simulatelocation will appear at the bottom, click it to complete the disguise; After that, the location of all the apps will be this virtual location.

There is a good and handy positioning modifier AQM, and I've been using it for a few months now.592. You can use the simple and convenient 3940 when you get down, and it is currently limited to Apple mobile phones, so you can go wherever you want. The last few alphanumeric numbers of each sentence are WeChat.

Tablet model: ipad4

1. Start the tablet system, call up the main interface of the user, and click"Settings"Icon.

2. Call"Settings"Options interface. Slide vertically on the left area to select"Privacy"Item.

3. Evoke from the right side"Privacy"option, click on it"Location Services"icon with a right arrow, and the next step will be to enable location services.

4. Call"Location Services"Options. Turn on"Location Services"The control button on the right side of the icon is used to determine your approximate orientation using GPS, etc.

Hello, method.

2. After clicking on "Settings", the option will reappear, and we find the "Privacy" option.

3. After clicking enter, we will find that there are all the permission settings for the iOS system. We click on "Location Services" at the top to turn it on.

4. At this time, we will find that all the apps that need location services in the mobile phone will appear in the list below. Just find the app you want to change and change its permissions.

5. If we want to change the system service, slide the list to the bottom, find the "System Service" option, and click on it, the system location service we need will appear.

6. We can choose to close the system services that we hide in the potato ridge and we don't need very much, such as: frequent locations, popular applications nearby, routes and traffic, diagnosis and usage, etc., we can choose to close to prevent privacy leakage.

Operating phone: iphone13

Step 3: Connect your iPhone to your computer and repair the environment through the repair tool on the network disk. Note: You should have an assistant software on your computer that connects your phone to your computer, please add trust to your phone when it is running. (as shown in the image below).

Step 4: Modify the operating environment, find the repair package corresponding to your iOS version number in the network disk, such as **package,** down and double-click on it, pay attention to the hail in the process and do not be intercepted by antivirus software. Wu Xianfan** After finishing the solution, double-click to run repair after the virtual compression, and the repair can be successfully completed.

(as shown in the image below).

Step 5: Start modifying the positioning, select the location on the computer, and click Modify Positioning. (as shown in the image below).

How do I check if my targeting has been modified?

Check your phone, check all the apps, and see if the positioning of all the apps has been modified successfully.

Which software is the location to change? Now there are two ways ios,Both do not need to be jailbroken ios11 within the modification of system files,ios11 and above can only be through the secondary packaging built-in positioning function,Specifically, you can go to find the teleportation technology app in a treasure

1. The first thing to explain to you is that the non-3G version of the iPad is not GPS positioning, not A-GPS positioning, not base station positioning, but Wi-Fi wireless hotspot positioning, we need to turn on WiFi to join WiFi

2. You can turn on the location in privacy, or you can turn off the location service of a certain software.

3. Of course, if it is the 3G version, it is directly GPS positioning, and it is also the same as the second step to turn on the location service.

Open the settings, fry the phone, and fry until golden brown on both sides.

I haven't tried it yet, so I'll try it back and reply again.

Need a computer, unless you're jailbroken from Apple

I'll get the iOS system, stable, don't jailbreak, lock the location, share the real-time location is okay, I hope it can help you, and you can also come and communicate with me.

There is a good and handy positioning modifier AQM, and I've been using it for a few months now.592. It is simple and convenient to use without jailbreaking 3940, currently limited to Apple mobile phones, and you can go wherever you want. The last few alphanumeric numbers of each sentence are WeChat.

Zhang FeiActor -- Voiced by: Zhang Yaohan, a famous general of the Shu Han Dynasty during the Three Kingdoms period. Liu Bei Changbanpo was defeated and retreated, Zhang Fei only led twenty cavalry to break the bridge, according to the water broken bridge, no one in Cao's army dared to approach; When he swept Xichuan with Zhuge Liang and Zhao Yun, he released Yan Yan in Jiangzhou; During the battle of Hanzhong, he defeated Zhang He in the ditch, and made great contributions to Shu Han, and the official was the general of the cavalry, the commander of the commander, and the marquis of Xixiang, and was later assassinated by Fan Qiang and Zhang Da. In the post-lord era, he was posthumously called "Huan Hou".

In traditional Chinese culture, Zhang Fei is known for his bravery, recklessness, and jealousy, although this image is mainly used in folk arts such as ** and drama, but it has been deeply rooted in the hearts of the people.

How to set the positioning of the iPad Steps:

1. Open the settings option and tap Wi-Fi.

2. Turn on the wireless LAN function.

3. Pull down the settings menu, click Privacy, and find the location service function in Privacy.

4. Select to turn on the location service.

It is summarized as follows.

Method steps.

1 6 Step by Step Reading.

Open the system interface of the iPad, here take the wifi version of the iPad as an example, if you want to locate it, you need the iPad to be set to be connected to the network, so that you can locate it, open the iPad settings icon.

78**。Coupon purchase.

2 6 Then go to the settings screen of the iPad, here select the Wi-Fi option on the left.

Location tracking Jingdong comprehensive online shopping**, how fast and good to save, quality preferred!

Ad 3 6 then enters the wireless LAN settings interface, where the switch is turned on, and then connected to an active network, that is, it can access the Internet.

Location positioning - on the best network, quality preferred, value-for-money capricious purchase!

After the network is set up in ad 4 6, then select the privacy option of the settings interface, and then the setting interface of the location service will appear on the right side, which shows the closed status, click the option directly.

The new positioning software in 2020 can help you locate quickly and accurately.

Advertisement 5 6 then enters the interface of the location service, at this time the switch behind the positioning comfort is white, turn it on, and turn green.

For the positioning of the tablet, we choose to add it in the system settings.

Once you've added your safe location, you can mark your location and adjust it.

1.Find the system's [Settings] on the desktop of the iPad, and then we click to open, 2Click to open Privacy, 3Click [Location Services] in the first column, 4Click the switch to turn on [Location Services] to turn on the positioning of your iPad.

You can directly go to the settings, then select Find My iPhone, and then you can locate it directly.

The iPad has an auto-positioning feature where you can adjust it yourself.

Go to Settings.

Accessibility. Just turn on the targeting settings.