The right click on HP laptops does not work

Is the right button of the touchpad not working, if the hardware is stuck or the contact is faulty, it has to be repaired. You can consider switching the left and right buttons in the settings, the left button can be replaced by tapping the touchpad, and the left button of the original button is cut to the right button.

However, it is not as convenient as connecting an external wireless mouse.

Summary. Hello dear! Reasons why the HP laptop touchpad does not respond and how to deal with it:

Reason 1: The laptop touchpad fails suddenly.

If it is in use, it will fail and not respond. This may be due to accidentally turning off the touch screen, generally press fn (function key) + f6 (different keys for different notebooks, the keys have a touchpad image on them) to unlock it. Some computers also have buttons that open and close the touchpad directly.

Reason 2 for laptop touchpad not responding: There is a problem with the touchpad hardware.

If none of the above problems are the above, it may be a hardware problem with the touch screen. At this time, it is best to contact the after-sales service to solve the problem, the general notebook touchpad does not respond, and most of them appear in the notebook computer that has been used for a long time.

Reason 3 for laptop touchpad not responding: There is a problem with the laptop touchpad driver.

If you have reinstalled your laptop, you should install the appropriate driver before trying to enable the touchpad. Then open the properties of the mouse in the control panel, you can see that there is a "device setting" after clicking, you can see that there is a "setting value" on the interface that comes out, and an interface comes out after clicking, and you can see that there is a "touch" on the left side of the interface, and there will be a "enable touch" on the right interface, and you can click to select it.

The right click on the HP laptop touchpad does not respond.

Hello dear! I have seen your question here, and I am trying to sort out the answers of several friends, and I will give you a reply in five minutes, please wait a moment! ^

Hello dear! Reasons why HP Laptop Touchpad does not respond and how to deal with it: Reasons why Laptop Touchpad does not respond 1:

The laptop touchpad suddenly fails, and if it is in use, it fails and does not respond. This may be due to accidentally turning off the touch screen, generally press fn (function key) + f6 (different keys for different notebooks, the keys have a touchpad image on them) to unlock it. Some computers also have buttons that open and close the touchpad directly.

The reason why the notebook touchpad does not respond is late ridge 2: If there is a problem with the touchpad hardware, if none of the above problems are the above, it may be a hardware problem with the touch Kuandan Zen screen. At this time, it is best to contact the after-sales service to solve the problem, the general notebook touchpad does not respond, and most of them appear in the notebook computer that has been used for a long time.

Reason 3: There is a problem with the notebook touchpad driver If it is a reinstalled laptop, you should install the appropriate driver carefully before trying to enable the touchpad. Then open the properties of the mouse in the control panel, you can see that there is a "device setting" after clicking, you can see that there is a "setting value" on the interface that comes out, and an interface comes out after clicking, and you can see that there is a "touch" on the left side of the interface, and there will be a "enable touch" on the right interface, and you can click to select it.

Tap the app with two fingers together.

The reason why the function keys don't work is that the ATK hotkey driver is not installed correctly.

After clicking to enter, you will be prompted to select the operating system, which is selected according to the operating system of the computer.

Note: Because it is summarized by netizens, we cannot guarantee that the driver will be successfully installed and used, if you really need to install and use, it is recommended that you first save important files before installation, so as not to cause unnecessary losses to you.

Fourth, if you install the driver after the problem is still there, then it is likely to be caused by the system of the machine, it is recommended that you try to put in the system installation disc to save important files and then reinstall the operating system to see if it can solve the problem you encounter.

We hope you find the above reply helpful.

The problem is in your XP system、If the factory is win7 system, you come back to install the xp, then the function keys will definitely not work、Then again, only the win7 system can support touch function keys,So you can only install back or restore win7

1.If you delete the system files by mistake, it is possible that this situation will occur as you described.

2.Reinstall the touchpad driver and see if that fixes the issue you're experiencing.

Majority. HP laptops all offer a switch button next to the touchpad.

If you don't want to use the touchpad at this time, you can press the button.

If you want to use the accessory in the future, remember to press the button again!

If your laptop doesn't have a switch button for the Touch Clear Tap and you want to turn off the touchpad, open the Mouse Properties window, select the Device Settings tab, and then tap the Disable button.

The touchpad can be re-enabled at any time from here. You can see if you have inadvertently used the touchpad only for travel rentals.

4.Turn on the device and press F8 to enter safe mode, see if the touchpad is also unusable in safe mode, if not, it is recommended that you can use the pure version of the system installation disc to reinstall the system"

It is recommended that you connect an external keyboard for testing.

1. If the external keyboard can be used normally, it is recommended that you contact the hardware in the maintenance;

2. If the external keyboard cannot be used, it is recommended that you click F8 when you boot the computer to enter the safe mode test;

a.If it's normal in safe mode, it's a good idea to recall what you did and set up before the problem occurred.

Or after you reboot into normal mode, back up your data and try to restore the system to the previous restore point: Open Start - All Programs - Accessories - System Tools - System Restore - Select the point in time when the system can be used normally before.

b.If the fault persists in safe mode, we recommend that you back up your data and reinstall the system.

The input and output of the notebook, the IO interface, and the sorting address code are all controlled by Nanqiao; It could be a problem with the motherboard. Better redo the BGA of the South Bridge!

Check whether it is a mouse problem and whether it is normal to connect the mouse to another computer and left-click.

Check if it's a mouse setup issue, Control Panel - Mouse, and change the non-normal theme as well.

The mouse is not compatible with the computer.

Is the mouse broken? Try it differently.