The front and rear display times of the 19 Audi A6L 3 0T are different, and the difference between t

The current 2010 Audi A6L is not turbocharged, but mechanical! The 2010 Audi A6L uses a new 24-valve FSI direct-injection supercharged V6 engine, which is very powerful, with a maximum power of 213kW, a maximum torque of 420Nm, and a 0-100km h acceleration time of only seconds. The Audi A6L engine is used in the old 06 Audi A6L, the engine is a 30-valve naturally aspirated engine, with a maximum power of 162KW, the engine was first used in the 03 Audi A4, with the 5th generation Audi A6 and Passat belong to the EA113 series engine, the technology is exactly the same, but the displacement is different, but this engine has now been discontinued, and now Audi has gradually begun to use the engine with more advanced FSI technology, 06 Audi A6L Discontinued in 07, and then replaced by the 08 Audi A6L, but Audi is mainly used as a bus, so due to the current restrictions on displacement in China, at the end of 09, FAW Audi launched this engine that is more powerful than the displacement engine, and at the same time discontinued the original 08 Audi A6L and.

The current 2010 FAW Audi A6L is the top model, and at the same time, except for the 2010 Audi A6L, which still uses the old engine, the other models: all use the FSI engine, and there is also a very advanced diesel engine to choose from.

Hello, did you solve this problem with this car? One hour short.

1、The Audi A6L time now needs to be adjusted on the MMI control panel.

Years later, 12 years ago, Audi found the SETUP button on the MMI control panel.

The most important thing after the year is the MENU key,After clicking in, there will be a setting option in the upper right corner of the MMI display,You click the corresponding MMI control panel button to enter,Then you can adjust the time,After the adjustment, you can see that the time of the dashboard has also changed accordingly。

How to adjust the time of the 2009 Audi A6:

1) After powering on, the CLK key is to display the time and set the time (2) Long press the CLK for about 5 seconds, and the time display flashes on the screen (3) Adjust the key (turn left to decrease, turn right to increase).

4) Clock, minute selection key.

5) After adjusting the time, press clk again.

6) Generally, after a few seconds, it will exit the adjustment mode if there is no action.

The Audi A6L time now needs to be adjusted on the MMI control panel. How to adjust the time of the 2011 Audi A6:

1) After powering on, the clk key is to display time and set time.

2) Long press the CLK for about 5 seconds, and the time display flashes on the screen.

3) Adjust the key (turn left decreases, turn right increases).

4) Clock, minute selection key.

5) After adjusting the time, press clk again.

6) Generally, after a few seconds, it will exit the adjustment mode if there is no action.

12 years later, the most ** is the MENU key,After clicking in, there will be a setting option in the upper right corner of the MMI display,You click the corresponding MMI control panel button to enter,Then you can adjust the time,After the adjustment, you can see that the time of the dashboard has also changed accordingly。

In terms of power. The 2012 Audi A6L is available with four engines, of which the engine is the added power. There are four transmissions: a six-speed manual transmission, an eight-speed Multitronic continuously variable transmission, a manual integrated transmission, and a seven-speed S Tronic dual-clutch transmission.

The Audi A6L time now needs to be adjusted on the MMI control panel. After 05 and 12 years ago, Audi found the SETUP button on the MMI control panel.

12 years later, the most ** is the MENU key, click to enter the upper right corner of the MMI display will have a setting option, click the corresponding MMI control panel button to enter, and then you can adjust the time.

1. Start the FAW Audi A6 car first.

2. Select the main menu content on the car display.

3. Select a time and date.

4. Manually modify the time number.

5. After the time adjustment of the last Audi A6 car is completed, you can confirm it.

How to adjust the time of the 2011 Audi A6:

1) After powering on, the CLK key is to display the time and set the time (2) Long press the CLK for about 5 seconds, and the time display flashes on the screen (3) Adjust the key (turn left to decrease, turn right to increase).

4) Clock, minute selection key.

5) After adjusting the time, press clk again.

6) Generally, after a few seconds, it will exit the adjustment mode if there is no action.

There is it in console setup.

Then one of the four buttons next to the navigation is the time, and it comes out when you press it.

As far as I know, there are two buttons on the dashboard, the one on the left is pulled out, and the left and right ones are turned to adjust the time!

Summary. 08 Audi A6L needs to press the buttons on both sides of the instrument to adjust the time, the left is the hour and minute selection button, and the right is the adjustment button, the specific operation steps are as follows:

08 Audi A6L needs to press the buttons on both sides of the instrument to adjust the time of stuffiness, the left is the hour and minute selection key, and the right is the adjustment of the ant slow key, the specific operation steps are as follows:

1. Press the H button on the left side of the dashboard and select Adjust Hours. Second, at this time, the meter time display hours and the number of buckets begin to flash. 3. Press the adjustment button on the right side of the dashboard and press once to increase it for 1 hour.

Fourth, press the min button again and choose to adjust the number of minutes and filial piety. 5. Press the adjustment button to adjust the number of minutes, and after the adjustment, let it stand for 5 seconds to return to normal display.

I hope I can help you with my balance, and I hope you can give me a thumbs up, your evaluation is very important to me, thank you, I wish you a happy life, a lot of money, and good luck. 

Press and hold the button on the lower left side of the instrument, and you can adjust it when the state judgment time on the instrument starts to beat, and the Audi A6L setting time needs to be adjusted on the MMI control panel. Find the SETUP button on the MMI control panel and set the time.

The setup time operation of the Audi A6L from 2012 onwards is as follows:

Move the cursor by rotating the large circular key on the multi-operation panel, and press the circular key down when the cursor is aimed at the time display on the multi-interface. The cursor is displayed on the hour, at this time, you can change the hour display by rotating the large circle key, until the desired hour, and then press down on the circle key to save. Rotate the circle key to move the cursor over the minutes, and set the minutes the same way you set the hours.

When setting the date, rotate the circular key on the multi-elimination operation panel, move the cursor to the date column in the multi-tasking interface, and set the year first, then the month, and finally the day according to the method of taking the trace or interval when setting.

Photo by Li Shuiqing of Pacific Automobile Network).

Hello! 1.After powering on, the CLK key is to display time and set time.

2.Long press the CLK for about 5 seconds, and the time display flashes on the screen. 3.

Adjust the keys (left turn decreases, right turns increases). 4.Clock, minute selection key.

5.After adjusting the time, press the clk again, and it will be good to sing the state. 6.

After a few seconds, it will exit the adjustment mode without action. I wish you a happy life!