Ask the master My computer ended the task and didn t reflect what s going on 5

Updated on number 2024-08-09
8 answers
  1. Anonymous users2024-02-15

    Don't know how big your memory is.

    If it's too small, you might want to consider adding a piece of memory.

    This is a big improvement in your computer's response speed.

    Of course, the cause of the virus in your computer cannot be ruled out.

    Either that's your file corrupted.

    If you really can't help it, just reinstall your computer!

  2. Anonymous users2024-02-14

    What the friends above said are very reasonable, your configuration is low, but you install too many applications, or some software is defective, do not use or use less shareware, test software. If you don't want to change CPUs, the best thing to do is to increase the memory, as this is the most cost-effective way to improve performance.

  3. Anonymous users2024-02-13

    The above guys are right.,In fact, it's the same with the big memory.,It's all pre-processed programs.,But the main thing is the fault of the CPU! You think, if the CPU is too fast, even with 256 memory, you won't often use it to end the program.

    Mainly, the CPU is too bad, and when the dual-core is cheaper than 1 yuan for two, I'll buy two and give it to you! I don't want any more, I'll wait another 50 years! Wait until it's cheaper for 1 yuan and 10 pieces.

  4. Anonymous users2024-02-12

    If you use too much CPU, your computer will be too slow, you may have opened too many useless programs, and you should be fine if you optimize it!

  5. Anonymous users2024-02-11

    The system doesn't have the resources to process your current instructions, so just be patient and wait.

  6. Anonymous users2024-02-10

    1) Slow boot or stuck: If you are talking about this when you boot up, don't operate it immediately after booting, because the computer is loading programs in the background when you boot up, and it will be operated later, which is normal, if the time is too long, look at the following method.

    First soft and then hard, such problems are caused by software conflicts, inappropriate drivers, and system problems, you can restore the system, or not reinstall the operating system, don't install software, patches, drivers, etc., to see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install them if you find something that isn't suitable (if it's a hardware problem, please overhaul it, such as hard disk, etc.).

    2) If this is always the case, first soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, don't install anything that doesn't fit (if you have any questions, please ask me).

    Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

    3) In terms of hardware, such as whether there is a problem with the hard disk, memory, etc., whether the temperature of the CPU and other hardware is high, if it is caused by hardware problems, it is recommended to overhaul it.

  7. Anonymous users2024-02-09

    Restart it once, or enter the security section to disinfect the virus.

  8. Anonymous users2024-02-08

    The problem is not clear enough, I think it is caused by insufficient memory, or the CPU usage is 100%, you should be able to see some memory or CPU programs from the task manager, uninstall it to see if it can solve the problem, or even the setting of virtual memory may also cause this phenomenon, check it.

Related questions
20 answers2024-08-09

It is possible that the motherboard is set up with voltage protection, because the voltage in your home is unstable, so it cannot be started. >>>More

20 answers2024-08-09

First of all, do a desktop cleanup, run defragmentation and other things after the desktop cleanup, and then upgrade the antivirus software to kill it again in safe mode. >>>More

13 answers2024-08-09

First of all, you can't pull out the memory with electricity, and secondly, there are two reasons why the reboot point is not lit, one is the problem of memory, and the second is that the CPU temperature is too high, you can touch the heat sink, and secondly, the battery is out of power and will cause this problem, my upstairs drill is very boring, I said so much, they are all copied, and they are comprehensive, so that the person who asked the question can not find the answer. In this case, like the one you're experiencing, it's a hardware problem.

10 answers2024-08-09

Did you have a hardware change? You go to the BIOS and set the settings that match the current system >>>More

5 answers2024-08-09

Changing the CPU to the E-series can be improved.

Or buy a new machine. >>>More