How to reinstall the system win10 detailed steps of the computer

Reinstalling the system is one of the more difficult to learn the computer,Here teach you how to reinstall the system win10,Learn to install the system yourself。

Reinstalling the system, it sounds particularly difficult, in fact, as long as you get started, it is not particularly difficult to reinstall the system, just find a tutorial on the Internet for related notebooks, notebook manufacturers are different, and the way to enter the BIOS system is also different. Go unclear on your own. If you have other problems in the process of reinstalling the system, please also do it yourself, thank you!

Tools required: a laptop that can be connected to the Internet, and an ultraliso software, an 8G USB flash drive (you need to format the USB flash drive, so remember to save important files). Then it's OK, it's that simple!

Here are the steps:

3. Plug in the USB flash drive and restart the computer to see if the USB flash drive has been started, if you do not enter the BIOS setting interface, change the boot order to the USB flash drive to boot, and change it to support UEFI mode.

4. After booting from the USB flash drive, follow the prompts to complete the system installation in the next step.

<>2. After opening the software, select the restore partition in OneKey Ghost, and select the official version of Win10 system image Win10 in the GHO Wim ISO image path.

3. Select Restore to C disk below (Note: Click on the C disk below, and it will become blue after clicking).

4. Then click OK.

5. After clicking OK, the prompt box shown in the following figure will appear, asking whether to restart the installation system, and we click the Yes button.

6. Next, the computer will restart Yunsheng, and the interface shown in the following figure will appear after restarting, you don't need to do anything, just wait patiently for the progress bar to finish.

7. Then the computer will be restarted again, it will enter the process of installing the win10 system, the general installation takes 5-15 minutes, the same we don't need to do anything, wait patiently until you enter the desktop, and the reinstallation of the system is completed.

8. Check whether the device manager driver has been fully installed, if not, you can drive life, drive wizards and other tools to repair the driver with one click. Manually adjust the optimal resolution of your computer display.

9. Copy back the backup data before reinstalling the system just now. At this point, the reinstallation system win10 has been completed.

Insert the system installation USB flash drive, reboot and press ESC (the shortcut may be different for different product models) to select Startup Items. Boot mirroring is now on:

2. Click "Install Now".

3. The installer is starting:

4. In the stage of verifying the key, enter the key directly, or you can temporarily skip it:

5. Agree to the license terms

6. Select "Custom":

7. Next, partition and <

8. Click New to allocate the size of your C disk, here 1GB=1024M, depending on your needs to allocate the size.

9. If you need to allocate C disk to 100GB, it is 100x1024=102400, in order to prevent it from becoming, you can add 5-10MB on the basis of 102400, here we directly divide the 127GB hard disk into a partition, click New and click Apply:

10. Windows will automatically create a boot text area, select OK here

11. After creating the C drive, the system reserve disk will be automatically generated, don't worry about it, this partition will be automatically hidden after the system is done. Next, select the path of system C installation (drive C) and click Next

If you divide a lot of areas, don't choose the wrong installation path.

12. Copying files and preparing files, and the next big part of the stage is done automatically:

13 The four steps in the following figure are automatically completed, and the next step is automatically restarted:

After the countdown of seconds, Windows will automatically restart, at this time, you can unplug the USB flash drive (to prevent the USB flash drive from being the first boot item and starting from the USB flash drive), or you can choose to restart it immediately.

15. After restarting, windows is still automatically loading the process, during which it will be restarted several times, and the settings are being prepared:

16. It will restart when it is ready, and it is time to verify the product key again, enter it directly if you have a key, or you can temporarily choose to say it later (lower left corner):

17. For a quick start-up interface, you can choose to use Quick Settings.

18. Wait a moment, the exciting time is coming.

19. The system has almost been installed here, and then create an account and password for this computer, and leave the password blank is not set a password.

This is the end of the Windows installation part.

1. There are 2 ways to enter WinRe: hold down [Shift] in the system, and click [Start] [Power] [Restart] at the same time; Force shutdown three times (some machines need to directly disconnect the power supply of premature sliding), and automatically enter Winre when it is turned on again.

2. Method 2: Use the recovery partitionSome devices may already have windows10 pre-installed, and there is also a recovery partition that you can use to reset your device and reinstall windows10. Please note that this method will delete all the files and apps that you have stored on your device.

3. The process of reinstalling win10 of the computer system is as follows: tool raw materials: Dell XPS13-9350-370winu disk.

Start the computer by pressing F12, go to the BIOS settings and select the Boot option in the red box, as shown in the figure below. Select the CD ROMdrive function in the red box as shown in the image below.

1. Take Dell notebook as an example, boot the computer and press F12 to enter the BIOS settings and select the Boot option in the red box, as shown in the following figure:

2. Then select the CD ROM Drive function in the red box as shown in the figure below

3. Press the F10 key to select yes in the red box, as shown in the following figure

4. Next, restart the computer, click and select the red box to install the system to the first partition of the hard disk, as shown in the figure below

5. Finally, wait for the system to be reinstalled, as shown in the figure below