Why can t the server be shut down?

The system server has a column**limit,When you want to shut down** run immediately,Whether you log out or restart (unless you force a shutdown) will not shut down,This is also a kind of data protection for the server,Once the shutdown data will be lost in some aspects (and your computer's time can not be changed),) The change time shall not exceed 30 minutes (of course, depending on the limit of your own server) If you change it, the program will report an error prompt you,Let you change the time in the restart! Of course, you're a server after all, so it's best not to restart it, and if you want to restart, just retire the server first! If you don't shut down the server and the shutdown is not successful, the server icon in the toolbar may not be displayed, then you can turn off the options in the process through the task manager (ctrl+alt+delete), if you don't know which process it is, you can put the process name in it, you can contact me if you don't know! Hehe.

The server is responsible for the data exchange and backup work within the entire LAN or WAN, and generally uses dual hard disk backup. For example, Tencent's QQ server, the reason why you can enjoy 24 hours of uninterrupted online is the credit of the server. As for the ** server, it takes on the responsibilities of more web hosting, and the question you open is also one, how can it be shut down?

After the shutdown, these netizens can only scold the street, so this is a professional problem. Some of them are for scientific budgeting, some are for military missions, some are for civilian entertainment, and the nature of the decision is the reason why it cannot be shut down.

The ability of a server to work continuously for a long time is related to its hardware architecture and usage environment.

The working environment of the server is ten times better than yours, don't be dissatisfied! 24 hours to maintain a low temperature and low humidity environment, there are large UPS and diesel generators, and it will not shoot cosmic rays on your face, and you don't know if you use the CPU without overclocking.

If you use an HDD array, there will be no vibration when it is fixed on the rack (although the consumption rate is not low, after all, the read and write load is heavy).

I don't think it's surprising that in this environment, in addition to normal HDD consumption, it will continue to run for a decade without interruption.

In order to meet the needs of users for uninterrupted and continuous high availability, commercial servers in life often need to use clustered configurations at the hardware or software level to meet these requirements.

Simply speaking from each platform, the general PC server, both a large number of Windows or Linux servers in the field of commercial servers are not clear, simply put, the CPU is produced by Intel, and its reliability is the worst, a year, in a normal use environment, a hundred servers are down about 10 times are considered to be a loss, including software and hardware reasons.

Like most of the online game servers, web servers, and the famous online shopping 6 server use this kind of PC server architecture, so most of Jingtang's online games will have a routine downtime maintenance time.

On the one hand, it is used for software upgrades.

On the other hand, it is used for the maintenance of hardware failures [this kind of hardware failure refers to the failure that will not be directly down, such as a disk failure with RAID redundancy, a single power failure in a dual-power supply environment, and other changes that cannot be directly replaced].

What if the server sometimes doesn't turn on, and sometimes it shuts down automatically.

If a server frequently fails to start or shuts down automatically, there could be several reasons:1Power issues:

Check whether the power supply rubber wire is firmly connected and the power socket is working properly. Try replacing the power cord or outlet to see if that fixes the issue. 2.

Overheating issues: The server may automatically shut down due to overheating. Make sure there is good ventilation around the server and clean the inside of the server from dust and debris.

Consider installing additional fans or radiators to reduce the temperature of the beam. 3.Hardware failure:

It could be a failure of the server's hardware, such as memory, hard disk, or motherboard. It is recommended to contact the server provider or technical support team for hardware troubleshooting and repair. 4.

Software issues: There may be a problem with the server's operating system or applications that is preventing it from booting or shutting down automatically. Try reinstalling the operating system or updating the software version to see if that resolves the issue.

5.Power Issues: Check if the power supply at the server's location is stable, and if there are any power fluctuations or outages.

UPS (uninterruptible power supply) can be considered to guarantee that the server can function properly in the event of a power failure. If none of the above methods can solve the problem, it is recommended to contact a professional server maintenance personnel or technical support team for further troubleshooting and repair.

What if the server sometimes doesn't turn on, and sometimes it shuts down automatically.

Hello, the server won't turn on or shut down automatically can be caused by a variety of reasons. Here are some possible workarounds:1

Check the power connection: Make sure the server's power cord is securely connected and the outlet is working. Try using a different outlet or power cord to troubleshoot power issues.

2.Check Hardware Connections: Check the hardware connections inside the server, including memory modules, hard disks, graphics cards, etc.

Make sure they are all plugged in properly and connected. 3.Clean up the dust inside:

After a server runs for a long time, dust may accumulate inside, resulting in poor heat dissipation. Use a compressed air tank or hair dryer to gently clean the dust inside the server. 4.

Check the cooling system: Make sure the server's cooling system is working properly. Check that the fan is working properly and that the heatsink is clean.

The heatsink or fan can be replaced if needed. 5.Check the operating system:

If the Hovo server is able to boot up but shuts down automatically soon, there may be a problem with the operating system. Try to enter safe mode or repair the operating system using the system recovery feature. 6.

Check for power supply issues: If the server shuts down immediately when it is turned on, there may be a problem with the power supply. Try replacing the power supply to troubleshoot the issue.

What if the server sometimes doesn't turn on, and sometimes it shuts down automatically.

The server won't turn on or shut down automatically, here are some solutions:1Check the power connection:

Make sure the server's power cord is connected properly and that the plug is not loose or damaged. You can also try using a different power outlet. 2.

Check the power supply unit (PSU): The server's power supply unit may be faulty, preventing it from turning on or shutting down automatically. Make sure the PSU's fan is functioning properly and there are no signs of overheating or damage.

If there is a problem, it needs to be replaced Check the hardware connections: Make sure that all hardware (such as memory, hard disk, graphics card, etc.) is properly connected, socks are searched, and there are no loose or damaged parts. 4.

Clean internal components: The server may shut down due to dust and dirt causing overheating. Use a compressed air tank or a SCZ hair dryer to gently clean the internal components to ensure that the radiator and fan are not blocked.

5.Check the operating system and drivers: Make sure that the operating systems and drivers installed on the server are up-to-date and free of conflicts or errors.

6.Check server logs: Review the server's log files to see if there are any error messages or warnings.

Diagnose and resolve issues based on log content. 7.Seek professional help:

If you're not sure how to fix the problem, or if the above methods don't solve the problem, it's best to consult a professional server maintainer or technical support person. They will be able to provide more concrete and effective solutions.

Workaround:

1. Look up the system process to see if it exists, if there is such a process, then this process will cause the system to shut down automatically.

2. In this case, we need a pstools tool (this tool can be found in the attachment), unzip it and put it in the root directory of the C drive, as shown in the following figure:

3. At this time, directly in the command window, run the -d -i -s command.

4. Enter the registry interface, and then find the VLMS entry

5. At this time, you need to 'modify the path and startup items'.

6. After modifying the path and startup items, restarting the server is completed, and then go back to the process to see if there is still a process, and if not, it can be used normally.

Have you set up a scheduled task, or have you run a scheduled shutdown script in the background???

You 1 is poisoned. 2 Yes, your server has been hacked, he added an administrator account, (you can see if there are 2 accounts) He remotely commanded shutdown, and you shut down.