How to paste the glass insulation film yourself, how to paste the glass insulation film

Don't stick it yourself, it's very troublesome to paste this thing, or go to the car decoration to paste it.

If you don't stick it yourself, there will be a lot of bubbles, and then the film you bought will be wasted, and the gains outweigh the losses.

It is best to go to a car beauty shop to find a professional master to post it;

The method of attaching the glass insulation film is as follows:

1. Before the film, first of all, we must ensure that the working environment meets the requirements of dryness and less dust, otherwise the dust and debris will enter during work, which will affect the effect of the film. It is recommended to wash the car before applying the film;

2. Cover the necessary position of the vehicle, protect the interior and exterior with a protective cover, if there is no special material, you can also choose plastic wrap;

3. Clean the car glass that needs to be filmed, pay attention to the top and edge of the glass, and then wipe the water;

4. The next step is to cut the car film, pay attention to the size of the car film to match the glass. Spray a little water on the surface of the glass, then adsorb a certain thickness of plastic film on the car window, and then draw a model according to the edge, which is a little more than the glass;

5. When the front and rear windshields are filmed, the baking film also needs to be shaped. Cover the cut car film on the outside of the glass, and then use the heat gun to shape it, this step is also more critical, and it is easy to make mistakes, because the temperature and shaping method of the heat gun have relatively high requirements, otherwise improper use can easily lead to the blackening of the car film or the cracking of the glass;

6. After the baking film is completed, you can formally paste the film, spray the inner glass with water or window film installation liquid, and then tear off the innermost layer of plastic film from the car mu Lutan film, and then paste the car film on the inner glass and move it to the most suitable position;

7. Spray some water or window film installation liquid on the surface of the car film, and then use the Yangtze River Delta plastic scraper to catch water.

8. After the water is completed, check whether there are bubbles between the car film and the glass, whether it is firmly pasted, whether there are wrinkles, whether there are scratches, etc., if there is no problem, Xuntong finally uses a towel to clean the water on the edge of the glass.

The correct method and steps for glass film are as follows:

1. Measure the size of the window glass first, and then use a utility knife to cut the glass film according to the size and quantity of the window glass. In order to make it more convenient to paste the film later, it is recommended that when you cut the glass film, it is best to cut the size of the glass film by about 1 cm to 2 cm.

2. Before pasting the glass film, it is generally necessary to clean the window glass first. You can fill a watering can with some water, drop some dish soap into the watering can, shake it sufficiently, and then use the watering can to spray continuously on the glass, and then use a water scraper to scrape the water stains on the glass.

3. Before pasting the glass film, some water should be sprayed above and below the glass film to avoid electrostatic reaction of the glass film. When pasting the glass film, you should first tear off the protective layer of the glass film, then spray some water on the glass, and then paste the glass film on the glass, and then use a scraper to fix the position of the glass film, so as to avoid the glass film from slipping.

4. Next, the scraper should be used to squeeze out the water between the glass film and the glass, and the scraping should be carried out from top to bottom. After squeezing and scraping, the glass film should be carefully checked for air bubbles, if there are, the air bubbles should be punctured with a blade, and then the air bubbles should be scraped flat with a scraper. Finally, use a utility knife to cut off the glass film beyond the position of the glass.