Decoration is indispensable for dual control design, when decorating, where are the most dual contro

For most people, it is only when it is time to decorate the house by themselves that they will find that there is a lot of knowledge in a single switch. Among the switches, there are not only single-control switches, but also dual-control switchesIt is even a multi-control switch, but among all kinds of switches, the most popular type of switch is the dual-control switch.

As the name suggests, the dual control switch means that it can be controlled using two switches. The two do not interfere with each other, and at the same time can control the power in the room. The most used place is in the bedroomIn general, one of the dual switches is installed next to the bedroom door, while the other is installed next to the bed.

The advantage of this placement is that it can be convenient for life, and we don't have to get out of bed and turn off the lights when we are lazy. To a certain extent, the emergence of dual-control switches is to better allow us to be more lazy in life. Of course, in addition to the bedroom, there are many places where you can also use dual control switches.

The lights at the entrance are often controlled by dual switches. Set one switch at the entrance of the entrance and the other in the living room. This allows us to walk all the way to the living room under bright lights, and then turn off the lights in the hallway after turning on the living room lights.

This is similar to lighting management in the bedroom. In the final analysis, it is convenient for the residents.

In addition to the entrance and bedroom, in fact, most of the places where the power is turned on can be handled by the circuit of the dual control switch. The advantage of this is that we can easily control the circuit, which in turn saves time and costs. Therefore, when decorating, don't forget the installation of dual control switches.

There is a switch at the entrance door, if the entrance is a corridor, after entering the living room light (dining room light), you have to turn off the light at the entrance door, then you should consider that the switch of the living room light (dining room light) should be able to close the entrance door switch, which requires the entrance door is a single open and double control switch, and the living room (dining room) switch is a 3 open and double control switch.

First of all, the chandelier in the bedroom can also be installed by the sink on both sides of the entrance and the aisle.

The lamp in the living room, and the lamp in the bedroom, one at the door, and one in front of the bed.

Dual control switches should be installed up and down the stairs and in the bedroom, which will be much more convenient.

Bedroom lights and corridor lights need double switches, which makes it more convenient for us to turn off the lights at night.

Except for turning on the lights at the entrance to the bedroom and turning off the lights when lying down, there is no need for anything else.

Lights in the living room, at the entrance door and in the hallway door leaving the living room, chandeliers in the bedroom, at the entrance door and at the head of the bed, and the bathroom light can be outside the door and by the sink.

The light in the bedroom, in the living room, and a health switch. It is best to use a dual-control switch. This is convenient and avoids walking around.

The lights in the bedroom, the living room, and the corridor are best to use dual-control switches. This is convenient and avoids walking around.

Chandeliers in the bedroom, by the door of the entrance and at the head of the bed, and in the bathroom can be outside the door and by the sink.

According to the floor plan of the family and the needs of the individual. Lights in the living room, at the entrance door and at the exit door; chandeliers in the bedrooms, by the entrance door and at the head of the bed; Bathroom lights can be outside the door and by the sink.

Owning a home is not easy for us, going to work to make money is for yourself to be able to buy your own house as soon as possible, but after buying a house is not enough, we also need to decorate the house, arrange it in accordance with your favorite style, so that all parts of this home meet your own aesthetic needs, this is the importance of a home, and we will first understand how to decorate before decorating, what kind of smart home appliances you want, Or it is necessary to plan when the decoration master arranges the line, but you can't wait until the last minute to decide, so that deviations will occur.

Nowadays, our demand for all kinds of homes is increasing, most people will use the intelligent mode of double open and double control in the newly renovated home, double open and double control as the name suggests is an electrical appliance, which can be switched and controlled in different places, so that you don't have to run around by yourself, as long as you have reached out to turn on and off the electrical appliances on the nearest controller, which completely provides us with a lot of convenience.

If the home has been decorated with double open and double control, you want to change it to a single line control, in fact, the operation is also very simple, you can directly scrap the three through wires, and connect the original live wire and the control line of the electrical appliances to a single-sided panel, so that it becomes a single-panel control electrical switch, and the other panel is open to link other electrical appliances, such an operation also requires a professional electrician to operate, and you are not familiar with the distribution of wires at home. Otherwise, it is difficult for us to avoid the occurrence of danger, and the line problem also needs professional maintenance personnel to detect whether the control mode of double opening and double control can be modified, and it can continue to be replaced under normal circumstances.

When decorating your home, you still need to consider in advance whether you really need the intelligent mode of dual opening and dual control, after all, it is also a troublesome thing to change the line once.

First of all, we should prepare the equipment in it, and secondly, we should also choose the corresponding things for a reasonable installation.

First of all, the wiring of these smart furniture can be arranged during hard installation, and then soft decoration, so that it will be more convenient to plan.

Single-open, double-open, and triple-open refers to several switches on a switch panel.

Single control, double control, and triple control are several switch controls on a circuit.

Single-open and dual-control literally means that there is a switch and control on both sides. For example, let's say you turn on the lights before you enter the bedroom, and then turn off the lights at the head of the bed. This requires the use of single opening and dual control. The lights can be turned on and off in two places.

Double-open and dual-control means that a device has more than two control switches, that is, a lighting fixture, which can be controlled in different places.

Three open and three control seem to be used less.

It depends on the living habits.

<>Originally, the beam between the two switches was supposed to wiring three wires, because there was a live wire in the right cassette, so it was connected to the L hole of the switch, and the L hole on the left was connected to the control line of the lamp.

The wiring method of the double-open and double-control switch is as follows:Preparation materials: screwdriver, diagonal pliers, dual control switch, lighting, wires, insulating tape.

1. Take two dual-control switches and a lighting lamp separately to introduce them in detail. Dual-control switch binding posts are generally marked"l"，"l1"，"l2"。When the L end enters the line, L1 and L2 have one end and L on, and after pressing the switch, the other end of L1 and L2 is connected to L.

2. Peel the thread with diagonal pliers first, and be careful not to leave too long the thread to avoid touching.

3. Take the L of the left switch as the live wire input, the L1 and L2 of the two switches correspond to the wiring, and then connect the right switch L to one end of the lighting light, and the other end of the lighting lamp is connected to the zero line.

4. After connecting the wire, you must pay attention to wrap the thread ends on both sides of the lighting lamp with insulating tape to prevent leakage.

5. Finally, the live wire and the neutral wire left by Biqi are connected to the plug to complete the wiring of the entire double control switch.

6. In order to facilitate wiring, you can remember the circuit diagram of the double control switch, so that the actual operation is easy to wiring.

That's a misnomer. The meaning of opening and controlling is similar.

It is more appropriate to describe it as dual dual control and dual single control.

The understanding of "link" and "control".

"Lian" can be understood as the number of connected lights, and "control" can be understood as the number of controllers (switches).

Single-link, single-control: It means that a switch controls a lamp, (a switch button on top of a control panel).

Single-link and dual-control: It means that a light can have two switches on or off. (One control panel has a switch button on top of it, and two of these panels are needed for power installation).

Stair lights are usually single-linked, dual-controlled. One controller upstairs and one downstairs.

In this way, it is not difficult to understand the dual dual control and double single control.

Duplex is a panel with two buttons on it, and the duplex single control only needs one such control panel, and the duplex double control is such a panel that needs two.

What switch you use, depending on what you need: two lights at the same time, two control points (e.g. bedroom, one control point for the entrance door, one control point for the bed).

Use a single and double control switch. The two lights need to be controlled separately, so use a duplex switch.

If you want two lights to turn on and off at the same time, use double open single control.

If you want to open only one or sometimes like two at the same time, use dual open and dual control.

The two lights are double-open and double-controlled switches.

Double-open single control bar, so there are many choices.

Dual control, that is, more than two control switches, that is to say, a lighting fixture, can be controlled in different places, we most commonly use; Stairwells, basements, long corridors, large bedrooms, etc.

Now there are many master bedrooms with bathrooms, so there will be a small walkway, turn on the lights at the door, and turn off the lights at the head of the bed, which is the most convenient dual control.

Let's not talk about its schematic, and there is no need to understand it, just know how to use it.

The double control switch is a very common switch panel, hardware stores have bought, the main thing is to lay out the wires first, it is a little different from the general lamps and lanterns, it is like this when wiring, the control lamps and lanterns, in the construction specifications are so specified, the lamp control L phase line is what we often call the control live wire, on the panel of the control switch, plus a return route, the double control switch, plus two loops, three control points can be three control, this situation is mainly used on the stairs.

The schematic diagram has also been made, please read it carefully.