My iphone5 standby consumes a lot of power, solves, faints.

Don't pay too much attention to this on the iphone5.

I'm usually paying attention.

Standby when the brightness is as dark as possible small open wifi cellular turn off the open cellular wireless location if it is mobile, then turn off some unnecessary notifications Unicom 3G 3G and even turn off Bluetooth without turning off like these.

Remember the most important background you want to even turn off quite expensive electricity.

Don't care too much about the iPhone5 being like that.

Mine too, you usually just pay attention.

When standby, the positioning is turned off, the brightness is as dark as possible, when the wifi is turned on, the cellular is turned off, the wifi is turned off when the cellular is turned on, if it is mobile, the 3G is turned off, even if it is Unicom's, 3G is also turned off when it is not in use, some unnecessary notifications are turned off, Bluetooth is turned off, and so on.

The most important thing to remember is that even if the backstage is turned off, it is really full of power.

Power off is a bit fast,Upgrade to try,It's been brushed to recover,If it's a software problem, it should be solved,If it's still so exaggerated,It's a hardware problem.,Go fix it.,Apple's global warranty,China is Beijing, Shanghai, Guangzhou, and Shenzhen Apple Store provides warranty,You can call Apple customer service to ask about the warranty。

ps.Didn't you drop 5% an hour with 3G on? I didn't pay much attention to mine, but that didn't seem like an exaggeration.

No more than 5% is normal.

Introduction: At present, what people usually call the standby state refers to the state of turning on electronic devices such as mobile phones or computers without any substantive work.

Mobile phone standby: The standby state of the mobile phone refers to the boot state without any operation, and the state in which the network signal is strong and stable, and the maximum standby time test can be carried out when the SIM card is not inserted. It means that the mobile phone is powered on and waiting for ** access at any time.

Extended: Standby is to save the data that is currently in the running state in memory, and the machine only supplies power to the memory, while components such as hard disks, screens, and CPUs stop supplying power. Since the data is stored in fast memory, it is faster to enter the waiting state and wake up.

However, this data is stored in memory, which can be lost if the power is lost. Hibernation is to save the data that is currently in the running state in the hard disk, and the power supply of the whole machine will be completely stopped.

Some users who use iPhone6 find that iPhone6 power consumption is very serious, and the standby time is very short.

If your phone's battery consumption increases, here are a few things you can do.

1. Diagnosis and usage based on location services: off.

This service sends your location information to Apple servers along with your crash diagnostic data. It's not useful to the user at all.

Yes, it doesn't have any effect if you turn it off.

Close the steps. Open [Settings] --Privacy--Location Services--System Services--Diagnostics & Usage--Off?

2. Diagnosis and dosage: do not send.

The system will automatically send these information to Apple's official servers due to the log files generated by the crash of the iPhone (some of which will record your location and other private information), so this function can not only avoid the risk of privacy leakage, but also save a certain amount of traffic.

Close the steps. Open [Settings] -- Privacy -- Diagnostics & Dosage -- Don't Send].

3. Location-based IAD Ads: Off.

This feature sends your location information to Apple's servers, which then serves ads related to your location based on your location.

Close the steps. Open [Settings] --Privacy--Location Services--System Services--Location-Based IAD Ads] --Off.

1. iPhone5S consumes less than 10% of the power when it is standby overnight.

2. Generally, due to the different length of time the mobile phone is used, the performance of the battery is not the same, so the power consumption of the mobile phone for a night standby is not a fixed value, and it is generally less than 10% under normal circumstances.

3. If you want to reduce the power consumption of your mobile phone, you can turn off the wifi connection and the software running in the background when you are resting, so as to ensure the least power consumption.

It's about 5%, anyway, mine is like this, and it's still onwifi, because 5S joins the M7 coprocessor, and the phone will turn off a lot of things if it doesn't move, so that the phone is more power-efficient.

Hello, standby power consumption is a normal phenomenon, for iphone5 in addition to the power at 100% of the most durable, after the drop will be faster than before, 10% is normal, look at other smartphones will be faster.

Turn off the gesture software, and test that the standby power consumption speed has improved significantly.

Because some versions of the system software have been running after the gesture lock screen or operation (this is a bug), many people use gestures to lock the screen and cause the standby power consumption to be fast.

It is highly recommended to click on the blank space of the screen or do some other operations (such as turning pages left and right) to exit the activation state of the gesture software, and then directly press the key to lock the screen.

Or just close the gesture software.

The battery is not durable, it is recommended to protect the battery well.

iPhone Battery Protection:

1, Charge on time, not to charge the phone until natural shutdown, the lithium polymer battery used in the iphone is not used to protect the battery by natural shutdown and recharging, this talk is only suitable for the era of nickel-cadmium batteries, excessive discharge of lithium batteries will lead to a decrease in ionic activity, reduce capacity, and lead to a decrease in life, so how much power is left to charge well? The answer is that more than 20% is best.

2, show 100% charge and then rush for an hour, lithium polymer battery charging is divided into two stages, the first stage of charging is 80%, about two hours can be completed, this stage belongs to the fast charging stage, the second stage continues to reduce the current and continue to charge until it is fully charged, the iphone will show 100% when the fast charging stage is completed, so another hour of charging is based on the situation, really fully charged, 100% in the status bar above the iphone The icon will change to a small plug.

3. It is best not to play with the mobile phone while charging, when the Apple mobile phone is charging, the current is divided into two ways, one is responsible for the battery charging, and the other is responsible for the normal operation of the mobile phone, there is a statement in the Apple mobile phone manual that "when charging, keep the battery at room temperature or close to room temperature environment", if you charge while playing with the mobile phone, it may cause the temperature of the mobile phone to increase, which is very harmful to the battery; In addition, it is not recommended to use a phone case that is too tight, as it will prevent the machine from dissipating heat.

It's normal to drop 11% of the electricity overnight, my four generations sometimes drop 30% of the electricity overnight, sometimes 5%, there are, this kind of according to your previous usage, and the power is an approximate value, there are virtual and real, sometimes the display is 90 electricity, in fact, there are only 70 points, and then it will fall very quickly, but after 70, it will become very slow.

You don't need to turn on airplane mode at night, you might as well turn off your phone when you turn on this. Turn off the positioning 3G, and then turn off the background. There is no way about power loss, the 5th generation is very power-consuming, you should be happy to drop so much, and people will drop a lot more.

There's no need to dwell on it.

Don't worry about this, it's a problem with the system, 4S is, that's the most power-efficient, 6It is recognized that the system consumes more power,Next time you can turn off options such as positioning,Notification,And so on,You can also save some power when the screen brightness is reduced,As for the night, you don't need to turn on the airplane mode,Mute can be。

The battery is thin and the capacity is small, and the standby time will be short, but you have to see if the network signal in your position is not too good, because the signal is not good, and the machine will not be short to search for the signal, so the waiting time is very short.

Power off is too abnormal, my wife's 5 are turned off in the case of a night standby power consumption will not exceed 2 (telecom version), not to mention iphone, my Anzhu mobile phone will not be more than 4 in a night standby in the case of turning off the data, so you are absolutely abnormal, it is recommended to send it to the after-sales service for testing. By the way, you didn't jailbreak, did you? If there is and then install the backgrounder, it is self-inflicted,If not, it may be a hardware problem,Especially the battery problem,iPhone disassembly and battery replacement even ordinary people can do without dismantling,Not to mention that it is free for authorized customer service,You don't have to worry about dismantling the machine life will decrease。

If you turn on airplane mode overnight, you can see how much of it is not normal.

About five percent should be used.