What fingers are pressed on the fifth fret of the guitar?

There are a lot of chords, and if you count all the chords in all keys, you can estimate that there are more than 1,000 chords.

Beginners generally use 2-key chords: C major and G major.

C chords are most commonly used in C F G AM DM EMG chords are most commonly used in g c d em am bm, and there are also 7 chords that can be ignored for beginners.

Depends on the ease of playing. There are no regulations.

The scale fingers of the guitar are only arranged in a normative way, not a complete scale, and there must be a lack of high or low notes, so you have to test your memory of the guitar fretboard when playing.

For example, if the highest note of this finger pattern is 5, then play the higher note and directly play the corresponding note of the next finger shape. From 1 to 12 frets, the order is MI finger type, SOL finger type, La finger type, Xi finger type, and DO finger type. Play all of this, and the problem will be solved.

Six-line staff. Six-line staff is a guitar-specific tab. The six lines represent the six strings of the guitar, from bottom to top correspond to the six strings from thick to thin, the number superscripted on the string represents the fret that the left hand should press when playing this note, and if it is an x, the left hand should press the chord in the upper left corner of the bar.

The vertical line represents the strumming string, and the wavy line represents the arpeggio.

Regular guitar tabs will have chord names and diagrams in the upper left corner of the bar - the diagram is an example of a vertical guitar neck, which usually consists of three to four frets, corresponding to six strings from thick to thin from left to right. The numbers on the diagram represent the left finger technique, 1 is the left index finger, 2 is the middle finger, 3 is the ring finger, and 4 is the little finger.

1. The five finger types you mentioned are only five commonly used finger patterns, but in fact, it stands to reason that there should be seven. Specifically, isn't there 1234567 seven notes, and the seven finger patterns are a series of scales extended from each note of the 1234567.

It's just wait. Each scale has its own "characteristics" and "taste", and most friends who study composition or arrangement should know it.

The fretboard of the guitar is the neck.

By pressing the string, the left hand can get different notes. For the division of work in the left hand, the guitar is like this: the finger, middle finger, ring finger and the little finger are responsible for the voice in the role.

For example, when in the first position, the index finger, middle finger, ring finger, little finger are responsible for the first character, the second character, the third character, the fourth character, that is, the melody **, then the touch is harmonious, and the left hand is according to the strings, it is necessary to follow the rules of the fingers.

If the string can't vibrate, it means that your left hand or split right hand has accidentally touched the sounding string. If the right hand cannot touch, it cannot be pronounced, which indicates that the left hand has pressed the string. Pressing the metal character or pressing the chain is too weak.

Get to know the staff and play 1234567 by comparing the position of the guitar fretboard to the sheet music and learning the scales.

The finger presses for the introductory guitar are as follows:

Essentials of pressing the strings with the left hand:

First of all, the thumb should be placed at the most convex place directly behind the neck, and the tiger's mouth should not scratch the neck; Then the fingers should be pressed perpendicular to the fretboard as much as possible; Second, press the strings with your fingers and don't touch the other strings.

Right fingering: The right hand is mainly responsible for plucking the strings and strumming the strings in guitar playing, of course, it also includes some playing skills such as percussion, syncoping, etc., but this section is mainly a basic tutorial, so it talks about plucking and strumming.

In general, in guitar playing, we use the letters P, I, M, A, and CH respectively, that is: P - Thumb, I - Index Finger, M - Middle Finger, A - Ring Finger, CH - Little Finger. When playing the guitar, we use the P-thumb to pull the strings down, and the I-index finger, M-middle finger, and A-ring finger are responsible for hooking the strings upwards, and the index finger is 3 strings, the middle finger is 2 strings, and the ring finger is 1 string.

Guitar shape features.

Guitar (Italian: chitarra), also known as six-stringed instrument. The top and back plate are flat, and the waist is generally concave without horns, and the classical guitar is generally without depression.

The neck is wide and long, with string bolsters on the fretboard and a number of narrow, slightly upwardly raised metal grids called "frets", which divide the strings into many semitones.

As a member of the family of stringed instruments, the guitar is a stringed instrument that produces sound by plucking the strings on top of it. The strings are plucked with one hand and the fingers of the other hand are resting on the fretboard, which is a small strip of metal that covers the neck. The sound of the strumming is enhanced by the guitar's resonance box.

The fretboard of the guitar is the neck.

The fretboard of the guitar is the neck.

The material of the fingerboard first requires wear-resistance, and in terms of wood, the harder the wood, the more wear-resistant. There is also the fact that it is not easy to deform, and the deformation of the fingerboard is more troublesome to deal with, which is easy to hit and affects the feel. Then there is the feel, which feels a little oily to the touch, and the smooth feel of the wood is very suitable for fretboard.

Guitar fretboard. Generally, the fingerboard materials commonly used are maple, rosewood, and ebony;

Ebony, maple, and rosewood each have their own characteristics. Ebony generally produces more oil, so there is no need to oil. If the weather is very dry, then rosewood should be oiled, maple should not be oiled, rosewood and ebony are biased towards the mid-frequency, maple high-frequency is better.

Ebony is the best, the texture is hard, smooth, almost no pores, and of course it is also the most expensive, generally high-end pianos are ebony fingerboards, such as taylor, larrivee, lakewood, Truman guitars, etc.

Rosewood is the next best material, which is harder than ebony but has more pores, and is slightly less smooth as a fingerboard material.

Maple, this kind of fingerboard only appears in electric guitars, and I don't personally recommend it, mainly because maple must be painted, and the feel will have a certain impact. By the way, since maple is painted, it cannot be maintained with lemon oil, which dissolves the lacquer surface.

Fingerboard fingerbord

The material is usually rosewood, the high-end ones will be made of ebony, and cheap guitars are usually directly painted in black, and the paint will fall off after a few plays. Branded guitar manufacturers usually inlay some shell decoration patterns here to show the nobility of the guitar. The fretboard has string rests and a number of narrow, slightly upwardly raised metal grids called frets, which divide the strings into semitones.

Familiarity with every note on the guitar fretboard is also a goal that every guitarist must strive for.

The fingerboard is the wooden board that your fingers press when you play the guitar, the English name is fingerboard, it is the wooden board on the neck, the neck is the part that the left hand holds, look at the name and know that it is related to the fingers, the fingerboard is inlaid with frets, that is, the copper bar (usually made of copper) that touches the position when pressing the strings, so it should be understood.

The front of the neck is the fretboard, and the fretboard has a fret.