How to install a solar water heater with a radiator

Ordinary radiators cannot be connected to solar energy because the water consumption is too large, it is recommended that you use superconducting radiators. The connection method is simple. I just don't know how many liters of solar energy you have in your home...

If you pick up a **. Connect the solar hot water pipe to the inlet of the radiator, and then add a small pressure pump to the return pipe of the radiator. The outlet of the booster pump can be connected to the return pipe of the solar energy.

Can solar water heaters be fitted with radiators? Hello, happy to answer your <>. The installation method of the solar water heater can be installed with radiators is very simple, you only need to connect the hot water pipe of the solar water heater with the water inlet of the radiator, and then add a small booster pump to the return pipe of the radiator.

Normally, it is not recommended to connect the radiator to the solar because of the large amount of water used. 1. Solar energy can bring heating, but the overall heating effect is not good. Because solar energy has already boiled hot water during the day, it is in a constant temperature state, and it is not in a heating state, and the temperature required for heating is high, if you only rely on the hot water in the tank for heating, then the heating effect is not very ideal.

2. If you want solar heating, you must add corresponding system equipment such as: auxiliary water storage tank, electric heater, etc., so as to have a good heating effect. Of course, the equipment is also relatively expensive, which leads to an increase in the heating cost of the owner.

For this reason, it is recommended that you decide according to your own financial ability. Hope mine can help you <>

Do you have any other questions?

Add a 3-way under the water valve of the solar energy, one end is connected to the water, one end is connected to the solar water valve, one end is connected to the gas heater and a valve, usually when using solar energy, turn off the added valve, and the gas heater water heater outlet pipe is connected to the hot water pipe, but also add a 3-way, which is very convenient.

As shown in the figure below, the outlet pipe of the two water heaters is connected with the pipe leading to the faucet with a tee, and a valve is installed in front of the tee and on the side leading to the water heater.

When using a solar water heater, close the valve to the electric water heater, and vice versa. There is no need to install valves for the water supply pipe (cold water) in this area.

I know solar heating products, which can be connected, but it needs some special control, otherwise it will not achieve the heating effect, there is now a smart solar electric auxiliary heating system on the market, you can go and see. Hope it helps, adopt.

If it's just an ordinary solar water heater, don't consider connecting it to the radiator, and the heat is basically negligible for heating. A large area of solar collectors can be placed on the roof, and the installation and sales unit will provide you with heating connection solutions and construction.

Solar water heaters and radiators can be connected.

1. The hot water temperature of the solar water heater can reach more than 80 degrees when the sun is sufficient, which can meet the heating requirements;

2. Due to the instability of solar energy, it is necessary to have an auxiliary heat source to supplement and heat the hot water of the system when there is no sun;

3. In order to ensure the stability of the hot water temperature of the system, it is also necessary to add a hot water storage tank to store the excess heat when the sun is good, and release the stored heat when the solar energy is insufficient, so as to adjust the storage and stabilize the hot water temperature;

4. The system needs to increase the circulating water pump to circulate the hot water stored in the hot water tank to ensure the heating effect at the end;

5. In order to automatically switch between solar energy and auxiliary heat sources, it is necessary to increase the automatic control system for temperature detection, give priority to the use of solar energy, and automatically start the backup heat source when the solar energy is insufficient.

According to the design of this system, the use of solar energy can be maximized, and the stability of the end heating temperature is also guaranteed under the premise of ensuring energy saving.

It is impossible to use collective heating or wall-hung boilers with single solar. That water temperature simply can't be reached.

Summary. 1. Generally, the installation of solar water heaters will not be alone, because the use of solar water heaters will have a greater impact on environmental factors after all. An energy water heater (electric or gas-heated) will be installed

2. First of all, it is necessary to understand what are the influencing factors if it is installed in this way, the most important thing is the water pressure problem.

3. If it is directly connected in parallel, when the tap water pressure is not enough, the water of the solar water storage tank will flow backwards into the tap water pipe. If the water pressure is too high, it is easy to overflow the water storage tank.

4. The problem of water pressure can be solved in two ways. First, the inlet pipe of the solar water heater and the electric water heater is equipped with a manual valve, and the use state is manually switched. This is the easiest way, two valves can be solved, and it is also the safest way.

The connection method is shown in the following figure.

5. The second is to install an automatic check valve to place the water of the water heater to flow back into the main water pipe or another water heater storage tank. The connection method is shown in the following figure.

6. The main thing is to sort out the way of connection and control the flow direction of water, and there will be no big problem.

Hope mine can be helpful to you.

How solar water heaters and electric water heaters are installed in parallel.

Hello, I'm glad to answer for you I'm talking about emotions in clothes, and my questions are answered by me. I'm typing for you to solve the problem, it will take about 5 minutes, don't worry, please wait a while.

Hello, glad to answer for you. 1. Generally, the installation of solar water heaters will not be alone, because the use of solar water heaters will have a greater impact on environmental factors after all. At the same time, an energy water heater (electric water heater or gas water heater) will be installed2, first of all, first of all, if it is installed in this way, what are the influencing factors, the most important is the water pressure problem.

3. If it is directly connected in parallel, when the tap water pressure is not enough, the water of the solar water storage tank will flow backwards into the tap water pipe. If the water pressure is too high, it is easy to overflow the water storage tank. 4. The problem of water pressure can be solved in two ways.

First, the inlet pipe of the solar water heater and the electric water heater is equipped with a manual valve, and the use state is manually switched. This is the easiest way, two valves can be solved, and it is also the safest way. The connection mode is shown in the following figure 5, the second one, an automatic check valve is installed, and the water of the water heater is placed to flow into the main water pipe or another water heater water storage tank.

The connection method is shown in the following figure 6, the main thing is to clarify the connection method, control the flow direction of the water, there is no big problem. Hope mine can be helpful to you.

How to connect the tube of the water tank and the tube of the solar panel on the installation method of the wall-mounted solar water heater! Hello, happy to answer your <>.

The installation method of pro-wall-mounted solar water heater is as follows: The first step: To install, you must first prepare the installation tools of wall-mounted solar energy, and the common tools generally required for wall-mounted installation are electric shock drills, rhinestones, Huichang flarers, trapboards, sleeves, levels, box rulers, safety belts, ropes, flathead screwdrivers, Phillips screwdrivers, hot melters, water pipe scissors.

Step 2: A feature of this wall-mounted solar is to find suitable installation conditions. The environmental requirements of this wall-mounted solar energy should be on the sunny side of the house and there should be no shelter around.

The third step is to determine the direction of the collector. When the building is facing south, south-east, east, or west, there must be more than 4 hours a day when the sun is shining. In this way, sufficient heat energy can be guaranteed.

Step 4: Determine the location of the installation, it should be noted that the inclination angle of the wall-mounted solar should be determined according to the local latitude of the installation. Then, the horizontal distance between the water tank and the collector should not exceed 2500mm, and the recommended distance is about 500mm.

In addition, the port under the tank is not less than 200mm, so that the copper pipe of both is always kept in an uphill trend. Step 5: Install the water tank, firstly, use the expansion bolt with a diameter greater than 8mm to punch the wall, and also make sure that the expansion bolt stays on the wall (excluding the insulation layer) for more than 80mm.

Secondly, install the hanging plate of the expansion bolt, and then hang the water tank, pay attention to the uprightness of the water tank, and do not tilt. Step 6: Install the collector.

Generally, expansion bolts with a diameter of 6 mm and a length of 20 mm are used. Adjust the angle according to the sun's rays, and then install the collector. The seventh step of changing the acre:

Copper pipes are used to connect the tank to the collector. Then fill with antifreeze. Install water pipes.

Step 8: Install the other components of the configuration. For example, display instruments, electric auxiliary heating rods, etc.

The above is the installation steps of the nuclear wall-mounted solar energy, through this introduction, you can do your own work by installing wall-mounted solar energy in the future. Hope mine can help you <>

Do you have any other questions?