If there is a problem during the installation of the rainforest wood wind, the installation guide of

2. Whether the carving speed is low (10 16) is correct.

3. What software is used to burn, it is hard to say with nero engraving, his anti-piracy function is powerful If the serial number is wrong, it will make you lose without any prompts, it is recommended to burn alcohol 120% or ultraiso.

4. There is a problem with the reading of your optical drive.

5. Whether the jumper and data cable of your machine are connected correctly.

6. Did you format the C drive before installing the recovery, and did not format the FAT32 in the C area.

7. There is also an inexplicable possibility.,The original disk that can be installed and recovered will not work if you use it again.,But ignore it and put it aside after a while and then use it and find that it's okay.,Hehe,Maybe hell.。

This is my experience, about ghost when saying that there is no solution called file.

1. Disc installation.

After burning the disc, boot up and press Delete or F2 to enter the BIOS, and set the disc from the first boot item. Start the computer with the system disc and select the first option to install the system automatically.

b.Manual installation: Copy the files under the disc to the hard disk, then reboot the settings disc to boot, then choose to manually run ghost11, and select the previously copied gho to recover!

2. Hard disk installation (recommended).

Hard disk installation (suitable for users who do not have a disc drive or do not want to waste discs, but you need to have a Windows system that can be used) first unzip, after decompression, enter the directory to find, copy or cut the file to a non-system partition (this step is because one-click ghost does not support Chinese directories), and then run the decompression directory to enter the menu, select install the ghost system to the C drive, click open, select the one you just copied out, click OK. Please be careful to back up your data on the C drive.

Failure Reason 1: The files of the system itself are corrupted.

This is an error generated by the system during the production process, and when encountering this problem, an error will be reported when the system is installed to 99%. The solution is to re-install the rainforest wood wind system.

Error installing the YLMF system on the CD.

Reason 2 for this issue:

Problem 1 is Problem 1, the system itself. Then there is 2, the surface of the disc is damaged, and the disc has scratches on the surface of the disc when it is burned.

Installation error reason 3:

The system was installed fine, but it suddenly stopped, and there was no progress on the current interface. This will most likely be stalled all the time, and the installation will be available by restarting. It is caused by a CPU or memory error for a short period of time.

Installation Failure Reason 4:

Although the system of rainforest wood wind is already small, the system needs enough space to operate, and too little reserved space will lead to errors. Generally, XP is recommended to reserve 50G, Win7 to reserve 100G, easy to use.

There are many reasons for installation errors, but after a novice friend makes a mistake, he doesn't know what to do? So write these down. Hope it helps. Do you have any problems, or a good solution. You can also tell us about the official website of Rainforest Wood Wind.

**Is it an ISO file with a stupid roll? Open the ISO file with UltraIso,Click Qipei Yudong,Write the hard disk image,Select the U disk,After the writing is completed,The old U disk can be used to guide the machine to install the system。

Is it normal for other devices (e.g. mobile phones) to access the Internet through the router? If it is normal, perform the following operations.

You can use 360 Security Guard's "Disconnected First Aid Kit" to try, there are multiple repair options for disconnected first aid kits, such as: reset network configuration, strong repair, LSP repair, etc. Use it to see if you can access the Internet.

No, press and hold the "win icon key" on the keyboard, which is the system key, and then press "r" ==" cmd OK, or press and hold the "win icon key" on the keyboard, which is the system key, and then press "x" and then press "a" ==" cmd (run as an administrator, enter the following command line by enter) to try.

netsh int ipv4 reset

netsh winsock reset catalogipconfig /flushdns

ipconfig /release

ipconfig /renew