When the air conditioner is turned on for strong wind cooling, the wind blown by the indoor unit is

Causes and solutions for the air conditioner to cool with the air unit when the air conditioner turns on the strong wind and cools the electric fan

1. The compressor has no refrigerant, add refrigerant.

3. System failure: check whether the capillary is dirty, oil or ice, if the air conditioner is not refrigerated when refrigerating, it is generally ice blockage, if the nitrogen blowing pipeline blows out the stolen goods or is not smooth, it means dirty blockage or oil blockage, if there is no refrigerant in the open system, it means that the refrigerant is leaking, check the leakage point for maintenance.

If the premise is that your mode setting and temperature setting are reasonable, then there must be a problem with the air conditioner. If the outdoor unit is in working condition, then it is safe to tell you that the air conditioner lacks refrigerant (freon, etc.).

Lack of refrigerant and the press did not start.

Maybe the refrigerant is gone, try adding some refrigerant.

1. If you have a problem with the temperature setting of the air conditioner, you can set the temperature with the remote control, and it is recommended to set the temperature when cooling: 26-28 degrees Celsius.

2. If there is a lack of air conditioning refrigerant (freon), you can find after-sales service personnel to check and add it.

3. The compressor problem can only be maintained by professionals, or consider buying a new machine.

4. If the air conditioner filter is blocked, it is best to clean the filter screen once in about 15 days.

5. Do not place items at the air inlet and outlet of the air conditioner, otherwise it will affect the refrigeration effect of the air conditioner, and foreign objects should be removed.

6. The size of the room should be considered when choosing an air conditioner, and if the room is too large, you can also use a cloth curtain and other partitions to reduce the room area.

7. If there is a heat source in the room that affects the refrigeration of the air conditioner, the heat source in the room should be kept at a certain distance from the air conditioner.

8. If the air conditioner is installed unreasonably, you can find the installer to reinstall and arrange.

9. If there is a quality problem in the newly purchased air conditioner, you can contact the merchant for replacement or maintenance.

It may be that it has been adjusted to ventilation mode, or it may be that the refrigeration effect of lack of fluoride is not good. Fluorine is the refrigerant.

Do you see if your air conditioner mode is misadjusted?

It's normal for you, because the air conditioner is refrigerated when it's on, and the evaporator here is very cold and blows out by the cross-flow fan inside, of course, the cross-flow fan is also very cold, when you turn off the air conditioner, the hot air outside will come into contact with the cold cross-flow fan, and the alternation of cold and heat will produce water droplets, and you will have the phenomenon you said when you turn on the machine again

When the air conditioner is strong and the water droplets are blown out, the condensate produced by the air conditioner during refrigeration, and the methods to reduce the condensate are: :

1. Turn the air conditioner on a high air gear and open the wind deflector of the indoor unit at the maximum position.

2. Clean the filter screen of the indoor unit to keep the air intake of the indoor unit smooth.

3. Add some thermal insulation sponge at the air outlet of the indoor unit.

First of all, it is necessary to know that the fins of the indoor unit coil are cold, which will produce condensate, and strong winds will blow out a small amount of condensate, which is a normal phenomenon, and you can use a smaller wind speed instead.

The drip tray is clogged, and there may be no one who can flow out, and strong winds bring the water out.

If the internal and external units are working normally (sometimes the external fan is turning and the compressor is not working), if there is no air conditioning, check the pressure of the refrigerant.

The wind is just the flow of air, and nothing is added to it.

Two scenarios.

1. The air conditioner is broken, find after-sales service to repair.

2.Garbage air conditioning, as soon as the weather is hot, it cannot be refrigerated.

Judgment method: Wait for the night to cool down the air conditioner, if the air conditioner can be refrigerated normally, the temperature difference between the air inlet and outlet is greater than 8 degrees, indicating situation 2, this air conditioner is garbage. If the weather is cool and it is not cool, it means that it is broken, and someone will repair it.

Is there cold air just installed Yes cold air is the installation problem I didn't install the fluorine leakage.

It won't hurt, the strong wind is just turned on the air conditioner to cool quickly, after 20 minutes, the temperature drops, you can choose high wind, stroke, low wind, silent can be, strong wind noise is relatively large.

No. Once you have this function set up, you can use it with confidence.

In the same way, the car runs at high speed and does not hurt the engine. -

It's just a motor, buy a fan and you won't turn on the maximum gear.

There is a difference. But the difference is very small, unless it runs 24 hours a day, it is basically negligible. For example:

For 1P machines, the maximum difference between the high and low air gears of the internal machine is 2-5W. 500 to 200 hours of operation. It is recommended to use automatic transmission for a reasonable air conditioner operation mode, so that high air is automatically selected in the initial stage, and medium stroke or low wind is used after the temperature is reached.

Power consumption is not the same, and it can vary greatly.

When the indoor unit of the air conditioner is running with a low windshield, the power consumption of the indoor fan motor is reduced, the outlet air temperature of the indoor unit of the barrel air conditioner is lower, the evaporation temperature of the air conditioner is low, the suction and exhaust pressure of the compressor is reduced, and the power consumption of the compressor is correspondingly smaller.

On the contrary, when the air gear is turned on high, the outlet air temperature of the indoor unit of the air conditioner is high, the evaporation temperature and evaporation pressure of the air conditioner are high, and the power consumption of the corresponding compressor becomes larger.

On the whole, the power consumption of the air conditioner running in a high air gear is much greater than that of opening a low windshield, which is mainly reflected in the increase in the power consumption of the compressor and the power consumption of the indoor fan motor.

It's definitely different, strong winds definitely consume more electricity.

The cabinet filter is dirty, or the fins are clogged with dust.

1. If there is a problem with the fan, it is the business of the external machine, and it is generally the feedback that blows to the big one. What the machine shows. This may be due to the fact that the starting capacitor capacity of the indoor fan has become smaller, the wind speed is not enough, and the air outlet has condensation mist.

2. Reasons and solutions for the small air volume of the internal fan during air conditioning and refrigeration

The air volume of the internal machine itself is smaller than that of other brands (the reason why the noise is lower than that of other brands), secondly, the effect is poor, first check the operating pressure of the external refrigerant, the exhaust temperature of the compressor, the operating current, etc., and after eliminating the problems of the external machine (poor suction and exhaust of the compressor, insufficient refrigerant in the system, poor heat dissipation, etc.), check the return air temperature sensor of the internal machine, the opening of the electronic expansion valve, and whether the divergence pipe is level.

a. The external ambient temperature is high, and the indoor personnel are more than Gree air conditioners working at full load.

b. The power supply voltage is too low, which causes the Gree air conditioner to be difficult to start, and then stops or the fuse blows after starting, so it is recommended that the user install a power regulator.

c. The air outlet of the air outlet is not large if the temperature cannot be lowered in the strong cold block room, which is because the air filter has too much dust, and the filter is cleaned.

d. Improper adjustment of the thermostat.

e. The installation position of Gree air conditioner is not good, which will lead to uneven indoor temperature or poor refrigeration effect.

3. The operating data is normal, which is caused by insufficient load configuration.

1) Design problems, may choose small or the ratio of internal and external units is too large, the outside environment temperature is high, and there are more indoor personnel and the air conditioner works at full load.

2) There is too much dust on the air conditioner filter, and the filter needs to be cleaned.

3) The installation position of the air conditioner is not good, which will lead to uneven indoor temperature or poor cooling effect.

4) Installation quality problems during the installation process.

There are many types of power-on auto-shutdown failures.

The easiest thing is to look at the lid of the inner machine and not touch the emergency switch, if it touches it, just open the lid and get it.

There is also a broken sensor in the internal machine, the cost of the sensor is about 2 yuan, and the maintenance fee depends on how to collect the after-sales wheel failure.

Loose online cables and broken display screens may also cause automatic shutdown when powered on.

It's best to check it out after the collapse of the fingers.