Ask for advice on the settings of the access control system 20

Hello, such a problem should find a product supplier or engineering company, to provide you with software and hardware manuals, different manufacturers of its operation methods are different!! You can check the employee's card number and other information, and if it has indeed been authorized, then see if other employees have the same problem! Otherwise, there is a problem with the controller and it has to be repaired.

To buy access control, you must choose stable, reliable, cost-effective products, and after-sales service must keep up!! Hopefully there will be an opportunity for us to work together. Buy an access controller and get free access control time and attendance software!

Dual CPU design, support attendance management, alarm linkage, interlock, anti-return, electronic map and other special functions. Please feel free to contact us.

The time period is wrong! , let's change the authorization time period.

There is no correspondence between the card number and the personnel information.

Now basically every family has installed an access control system or an anti-theft door, in fact, the password of access control can also be changed, and then I will take you to understand how to change the access control password, and the precautions in the process of access control.

1. Change the access control password

1. The state of the security door has been adjusted, and only the interface in the initial state can be set.

2. Enter the initial password, under normal circumstances, the initial password is 12345, and press the number key to end.

3. Select the * key to enter the set program.

4. Enter a new password, press the number key 1 9 to choose the password you are more familiar with, and finally press the number key to set the new password successfully.

2. Precautions for the use of access control

1. Clean in time

The access control is installed in the place of the door handle, then the dust inside the access control is very much, if there is more dust, it will lead to the failure of the access control system, and there will be ineffective buttons, so in daily life, the access control shell must be removed, clean up the dust inside.

2. Replace the battery in time

Now most of the security door access control is the use of batteries, if the frequency of use is relatively high, then the battery use time is about 2 3 months, if the access control battery is exhausted, our door can not be opened, then will be trapped outside, so the battery needs to be replaced regularly, so as to ensure the service life of the product, will not affect the daily life of individuals.

3. Set a familiar password

Now there are more numbers in daily life, many places will involve passwords, some people because of more trivial matters, so often forget the password, then when we set the password, it is best to set it to a person's birthday or ID number, because after the access control forgot the password, you need to find a lock company to unlock.

I conclude: the access control set password can ensure our personal safety, but also to ensure the safety of property, the security factor is very high, but in order to ensure that it does not affect the daily life of individuals, we must pay attention to the access control system in time.

Taking a Huawei phone as an example, you need to use the NFC function of the wallet in the phone, and the operation method is as follows:

Tool: Huawei P20

Operating system: EMUI

1. Open the HUAWEI Wallet app and select the "Key of the Gate" option.

2. Click to enter the "Door Key" and select the "Add" button at the bottom.

3. After clicking Add, place the access card on the back of the Huawei phone, and the phone will automatically turn on the NFC function and read the access card.

4. After reading the access control card successfully, click "Add" below.

5. After confirmation, the mobile phone will automatically add the access control card.

6. After the addition is completed, you can set the name of the card to facilitate the use of multiple access control cards.

1. How to match the electronic access control card.

First of all, take the original electronic access control card and go to the department that issued the access control card; Then the staff will put the original electronic access card on the card reader; After that, the reader will slowly read the relevant information in the electronic access card through electromagnetic waves; After all the information is read, put the new access card on the reader, and input the information in the original electronic access card into the new electronic access card.

The access control card can be set directly on the access control host There is also a kind of access control card that is set directly on the computer through the software Xinan technology access control card is set up on the access control host with a single door all-in-one machine and networked, and the network can be set on the host and the computer with two functions,。。 The specific settings should be decided according to the access control host.

How to set up an access card on a Huawei phone?

Can I use the main card to open the secondary card to set the mud?

Summary. Thank you for your patience.

The following describes how to set up the ID access card.

2) Then open the client and enter the username and password.

3) Once you have access to the system, click on "Card" in the options to add it.

4) The interface that appears next is the existing user's access card, fill in some relevant information according to the serial number on the user's access card, so that a new access card is created.

5) If you want to view or print the attendance sheet, click the "Parameters" option on the initial screen, and then click "Monthly Report" in the following options to query the attendance records of the staff.

Extended information: So what information do you generally need to know before setting up the access control card?

1) The ID number of the access card.

2) Who is the user of the access card?

3) The ID number of the access card user.

4) If the user needs to set a password, you need to ask the user for the password setting.

If I'm helpful to you, please also give a thumbs up (lower left corner for evaluation), look forward to your like, your efforts are very important to me, your support is also the driving force for my progress, once again I sincerely wish you a happy life!

How to set up the ID access card.

Hello, I have seen your question and am sorting out the answer, please wait a while

Thank you for your patience and wait for the ID access control card to be set up as follows: 1) First, ** a client of the access control system 2) Then open this client and enter the username and password 3) After entering the access control system, click on the "card" in the shouting option to add 4) The next interface that appears is the user's access card that already exists, fill in some relevant information according to the serial number on the user's access control card, so that a new access card is created. 5) If you want to view or print the attendance sheet, click the "Parameters" option on the initial screen, and then click "Monthly Report" in the following options to query the attendance records of the staff. Extended Resources:

So what information do you need to know before setting up the access control card? 1) The ID number of the access control card 2) Who is the user of the access control card 3) The ID number of the user of the access control card 4) If the user needs to set the password, you need to ask the user to set the password If my help to you, please also give a like (evaluation in the lower left corner), look forward to your like, your efforts are very important to me, your support is also the driving force for my progress, once again I sincerely wish you a happy life!

Pay attention to Xia County.

Pay attention to the things around Xia County.

1.Click on "Settings".

3.Open NFC

4.Go back to the main interface and click on the "Wallet Icon".

5.Click on "Smart Card".

6.Click on "Access Card".

7.Click on "Create Blank Card".

8.Check the "Disclaimer" at the bottom and check it to confirm.

9.Put the community access control card on the back of the hand-ruler machine, and the camera is slightly down to scan the access control card.

10.After waiting for about 1 minute, the progress bar at the bottom will automatically enter the interface of the analog access card, where you can personalize it.

11.Click "Done".

12.Click "Write Card Successfully" and you're done.

Such important news.

Don't let everyone around you know about it!

enjoy·

The most headlined, the deepest, the most informative.

More convenient and more understanding of you! Know Xia County better! Let you understand the changes in Xia County in seconds.

Summary. 1. Preparations.

Step 2: After jumping to the scanning interface, you can see that there is a [Scan or Add Card] option below, click on this option to add a card, generally select a transportation card, the purpose of this operation is to get a virtual ID.

PS: When adding a card, remember to choose a transportation card that does not require a sign-up fee to avoid unnecessary consumption.

Step 3: Here the author needs to use the Shanghai bus card to open directly, if you don't need this card, just add a transportation card that does not require a card opening fee, click on the upper right corner of the add after the opening is completed.

How to set up the ID access card.

After jumping to the scanning interface, you can see that there is a [Scan or Add Card] option below, click on this option to add a card, generally choose a transportation card, the purpose of this operation is to get a virtual: when adding a card, remember to choose a transportation card that does not require a card opening fee, so as to avoid unnecessary consumption. Step 3:

If you don't need this card, you can add a transportation card that does not require a card opening fee, and click on the top right corner to add after the opening is completed.

Second, after the start of the simulation access control card traffic card is successfully added, first swipe the virtual card we created on the card reader in the community, and then the ID of the virtual card will appear in the community access control system. Pay attention to remember and live in the time and place of swiping the card, and finally find the property of the community, indicating that you are the owner of the community, let him add the virtual card to the access control system, after the addition is successful, the iphone can unlock the access control system.

1. You need to use your mobile phone to set up, open the device connection in the mobile phone, and click the NFC interface in the device connection to open this setting.

2. After opening, you can simulate the home access card into a virtual one, you need to open the wallet column in the settings, and you can find the option of the door key after opening, and then enter this interface, click on the add option.

3. At this time, you can read your access card information, you need to place the access card behind the mobile phone to read the information, and you can use the virtual access card after reading successfully.

After the access control card is set up, you can directly use your mobile phone to swipe the card at the card swiping place in the community or the company, and you don't need to make the balance cavity pretend to be the access control card to swipe the card.

Precautions for using access cards.

1. If you leave the community or the company and do not need to use the access control card, then you can click Remove the added access card in the virtual access card to remove it, and you can also choose to add a new access card.

2. If you often forget to bring the access control card, then you can use your mobile phone to set up a virtual access control card, and you can solve this trouble after setting it up. <>

The steps to set up an access card are as follows:

1. You need to use your mobile phone to set up, open the device connection in the mobile phone, and click the NFC interface in the device connection to open this setting.

2. After opening, you can simulate the home access card into a virtual one, you need to open the wallet column in the settings, and you can find the option of the door key after opening, and then enter this interface, click on the add option.

3. At this time, you can hold the line to read your access card information, you need to place the access control card behind the mobile phone to read the information, and you can use the virtual access control card after reading successfully. After the access control card is set up, in the community or the company's card swiping place, you can directly use the mobile phone to swipe the card, and do not need to use the access control card to swipe the card.

The role of the access card:

Access control card refers to the card used in the access control system, such as access card, access control card, parking card, membership card and other access control cards before issuing end user use, set up by the system administrator, determine the area that can be used and the user's stool authority, the user uses the access control card to swipe the card to enter the management area, no access control card or authority is not opened to the user, can not enter the management section of the area.

There is a chip called RFID in the access control card, when the user holds the card containing RFID chip through the card reading machine, the electromagnetic wave emitted by the card reading machine will begin to read the information inside the card, the information in this can not only be read, but also can be written and modified, so the chip card is not only a key but also an electronic ID card. <>