Hello, how to install the network version of the advertising machine 15

As the name suggests, the network version of the advertising machine is controlled by the network, and the general installation needs to have a network cable interface and a power interface, and now the more advanced ones are connected through wireless wifi, so you need a power socket. The installation of the wall-mounted advertising machine is similar to the installation of the general TV, and the vertical cabinet type is even simpler. Like the advertising machine of Shanghai Jiawang communication, the installation operation is very simple and convenient, you can go directly to their technical personnel to consult, you can find their company at a glance, the industry is quite famous.

First of all, take out the wall-mounted advertising machine from the inside of the package from the machine, and take out the protective bag and accessories on the outside of the package for later use.

The machine is laid flat on the outer packaging of the machine to prevent bumps or friction. Or put the OBOO building wall-mounted advertising machine facing the desktop, and put a soft cushion on the table to avoid scratching the glass surface.

Open the security door with the security key that comes with the wall-mounted advertising machine.

After the safety door is opened, use a screwdriver to remove the safety inner screws of the wall mount to facilitate the removal of the back plate of the wall mount. Then use your hand to push the wall mounting board of the wall-mounted advertising machine in the direction of the door lock, and the hanging plate can be removed.

Install a WiFi antenna to connect to the WiFi network, and the RJ45 network cable is also supported.

Use a level or a tape measure to measure the installation position and height and width of the wall-mounted advertising machine in the building, and mark the point with a pen. Make sure that the wall is able to carry the weight of the machine, preferably a solid wall. On the wall of the drawn positioning hole, punch out the hole of 6 8 with a 6mm or 8mm drill bit (the number of holes is determined by the weight of the LCD advertising machine), and hang the positioning hole with a depth of 50mm.

Install the wall mount back plate to confirm the position of the hole on the wall, use expansion screws and steel nails to punch the hole, or tap to fix the back plate. Paste the wall-mounted board of the wall-mounted LCD advertising machine horizontally on the wall, and mark it with a marker in the place where the screwdriver needs to be fixed (4 6 grains under 22 inches, 6 8 grains above 42 inches).

After fixing the backplate of the OBOO building wall-mounted advertising machine, two people jointly lift the machine to the position of the fixed backplate, fix several fixed clamping positions on the fuselage, and remember to lock the installation screws on the inside of the security door after fixing to prevent the machine from being removed at will. There are 4 hanging holes behind the advertising machine, aiming at the 4 hanging nails on the wall-mounted board, it is easy to hang from top to bottom, due to the weight relationship, the advertising machine above 26 inches is best installed by two people.

After hanging the OBOO wall-mounted LCD advertising machine, be sure to check whether it is stable and hung well. Plug in the power cord and turn on the power switch to power on the machine.

Need to have a network in the installation location If you don't understand, you can consult Tianjin Yushuo Electronics, they are a manufacturer specializing in the production of advertising machines.

There are two ways to install advertising machines. One is wall-mounted and the other is floor-mounted. The specific installation method is different.

Wall-mounted advertising machine installation method: first remove the wall mounting board on the back of the machine, fix the wall mounting board on the wall with expansion screws, or install it on the hanger, and then the machine is OK.

Floor-mounted advertising machine installation method: usually divided into the fuselage part and the base part, advertising machine manufacturers are equipped with screws and hexagons.

Use hexagon and screws to fix the base part of the machine and the body part together, and you're good to go.

If you still don't know how to do it, you can ask the manufacturer who bought it at that time.