How do I reinstall the system?,Why can t I get into BLOS?

Take a look at the BIOS teach 9 more concise commands, speaking of which device is set up first, when the BIOS system starts, there is a boot item in the upper part of the window, click it to enter, and then look for the boot sequence item in this window, after clicking, several options will appear such as cod-rm, hard disk, U disk, etc., you use that device to start up on which device, and then click F10 (save and modify and exit), the computer will automatically install the system process.

Press F8 or F12 The system prompts you to choose. You don't need to go into the BIOS unless you can't get in.

Generally, you don't need to set blos, just boot F12 or F8 and select the optical drive to start.

You can't reinstall the system in the BIOS, you can only make some settings; If you use a system disk to install the system, you have to go to the BIOS, and first set the optical drive to the first boot.

Press the del button when booting up, after entering the BIOS, select the optical drive as the first boot, and then put the disc into the optical drive; The system automatically restarts to enter the disc operation interface, and then selects to automatically install the system to C disk or system disk, at this time, you don't need to manually operate the computer to automatically start installing the system.

1. Boot up and press del to enter the BIOS to set the CD drive to the first boot 2, after the setting is completed, press F10 to save the current settings and exit BIOS3, after the system automatically restarts and enters the disc operation interface, and then select the automatic installation of the Ghost XP system to the C disk or system disk, and then the computer will automatically start to install the system without manual operation; And the system CD will install all the drivers.

It's the BIOS

The system cannot be reinstalled.

If you have a CD, use the CD to install it, usually the BIOS is the default optical drive boot or, if your computer has a one-click restore, you can also use it to restore the system.

If you want to reinstall the system, prepare the installation disc first.

Then set it to optical drive boot under BIOS. Then it will automatically enter the installation interface after launching.

How to set it up:

If your current system can still enter, there is a very simple way, open the MaxDOS console of the MaxDOS toolbox, select Restore My Image, and then click Open, select the unzipped GHO file, select the image after selection, and the computer can automatically restart, and you can install the GHOST file to the C drive without your operation

Remove the hard drive and put it on another computer where a keyboard and mouse are good.

Ghost will shut down as soon as it's finished.

Release the driver on your computer and you're good to go.

If the motherboard battery is not dead, there is no need to reset the BIOS to reinstall the system.

If the motherboard battery is removed, press the Del button after powering on to enter the BIOS

Take MSI motherboards as an example:

The first item is standard

CMOSSeves is the standard setting of CMOS, where you can set the startup sequence, onboard equipment, frequency of the transport cavity, etc. In general, it is not recommended to set it, especially for novice friends, we just need to know what it represents.

The second item is AdvancedBIOSSfeatures, which is also the object we focus on today, because we enter the BIOS to set it up, and the white point is to set the first boot item of boot, which is what we usually need to use when installing the system, whether it is a USB flash drive or a CD-ROM system.

In fact, the method of setting up is also very simple, we only need hard

diskboot

priority (hard disk boot priority), and then set it to the first startup item we need, note that if you set the U disk to start, sometimes you may need to insert the U disk to set it successfully.

In fact, we really need to set it up when we enter the BIOS, which is AdvancedBIOSsFeatures, and other options will not be used often, but friends who want to know can also click on it themselves, one thing to note is that if you don't know much about BIOS, don't change it without permission.

When we have completed the BIOS changes, we also need to save the changed settings, so that the configuration we made after the computer reboots can take effect, if we exit without saving it, our previous changes are in vain, because don't forget to save the BIOS after setting up.

The first step is to set up the light enlightenment:

The so-called optical start means that the computer reads the optical drive first when it starts up, so that if there is a disc with optical start function in the optical drive, it can be read before the hard disk starts (such as when installing the system from the optical disc).

How to set it up:1Start the computer and hold down the DEL key until the BIOS setup window appears (usually with a blue background and bright yellow English text).

2.Select and proceed to the second item, "BIOS."

Setup. Find the item or group that contains the word boot, and find the three items in order: "first", "secend", and "third", which represent "the first item is initiated", "the second item is started", and the "third item is started" respectively. Here we can set it to "optical drive", "floppy drive" and "hard disk" in order.

If you don't see these three e-texts on this page, usually the options menu on the right side of boot is "setup", then press enter to see).

3.After selecting the three startup methods, press the F10 key, the E text dialog box appears, press the "Y" key, and press Enter, the computer will automatically restart, proving that the changed settings have taken effect.

BIOS set up the boot disk on the line,If you start with a CD,Put the first CD in the boot,And then save the settings Sakura.。 Everything else is searched according to the default spine leakage, don't move.

There are three ways to reinstall the system: reinstalling the system, it will only change the system in the C disk of the computer, such as the files and things in the D and E and F disks of the computer.

According to your computer configuration, you can install win7 operating system. Use the computer hard disk to install the system, you can install the win7 system, the specific operation is as follows:1You can go to the base of the system.

3.Open the unzipped folder, double-click "Gho Image Installer", and in the window that opens, click "Install".Can.

4.In the window that appears, the ghost image file path will be automatically added, select the partition you need to clean this to restore to, the default is C drive, click the "OK" button to install it automatically.

The second is the optical disc mounting system. It is suitable for those who have a good understanding of the BIOS settings of the computer. [Find and enter the option containing the word "BIOS" in the BIOS interface, 1.]“advanced bios features”

2.After going to "Advanced BIOS Features", find the first boot device option with "first", "First boot device".

3."First Boot Device" option, select "CDROM" Enter, after the configuration is set, press the "F10" key on the keyboard to save and exit, then the computer will restart by itself, and the rest is to install the system automatically.

Above are the steps to set up the BIOS boot. Each computer has different BIOS settings, you can refer to it. Once you've learned it, you'll be able to pack the system on disc. 】】

The third type is the USB flash drive mounting system. It is suitable for those who have a good understanding of the BIOS settings of the computer. After watching the tutorial on making a USB flash drive, you will use the tray system. Go to the computer store.

Learn how to install the system.