Why don t you break 1 egg if it falls on the ground 15

For your question, there is only one, that is, the force per unit area of the egg when it touches the ground is within the tolerance range of the egg shell, so it will not break.

The function of the eggshell is to transmit the extrusion force received from the outside to the whole egg evenly, so that the force received on one side is reduced, so that it does not break.

1. The problem of the ground, there are protective measures on the ground, and the specific reasons can be subdivided and omitted.

2. The problem of eggs, eggs are cooked, or there is protection, specific slightly.

3. The problem of falling may be very low, or vacuum, etc., specifically.

Fell into a softer place. Or it's cooked.

In addition, the function of the eggshell is that the extrusion force received from the outside can be evenly transmitted to the whole egg, so that the force received on one side is reduced, and it is not easy to break.

The hardness of the eggshell is unevenly distributed, with thicker in some places and thinner in others. The angle of the fall is different, and the degree of damage to the egg is also different.

A lot, 1Cushions such as thick sponges for egg packs.

2.You can make a bracket and fix the eggs in the middle with a bag and thread.

3.Put a sponge on the ground.

4.Put the eggs in a plastic bottle and fill it with water to seal.

Frozen, maybe it's an experiment, there are eggs with tails, there are also height restrictions, in short, the answer is very broad, if it's a brain teaser, it's much simpler.

2 answers, 1: It's a hard-boiled egg 2: The eggshell is cracked, and the liquid inside will not break, and the phenomenon of yellowing will occur! I don't know if my answer is satisfactory to you!

Drop it from the lower place.

It's like a chicken laying eggs, it's not broken!

Vinegar-soaked eggs become elastic over time.

There are cushioning substances such as cotton on the ground.

Eggs are boiled or chickens are gone.

Eggs will break, but the ground certainly won't!

There are a lot of answers to this, such as the height of the fall, the cushioning force of the ground, etc.

Damn! Such a question. If you don't do anything about the ground and the egg, it's too low.

It's a waste of time and so many people, it's a waste of the BBC

It fell from the first floor to the second floor.

Because it was a hard-boiled egg.

Because this egg is very firm.

Now there is a kind of fake egg, I heard that the yolk can bounce up like a bouncy ball when it falls on the ground, I don't know if you ...... it

On the ground, explain how it can be broken in the air.

1. Materials required for the experiment: tape, scissors, plastic stool greeting bottles, raw chickens and eggs. See the image below:

2. Cut the plastic bottle from the middle. See the image below:

3. Take one end close to the bottle cap and set aside. See the image below:

4. Hang the eggs in half of the plastic bottle with tape, the center of gravity should be as low as possible, and the tape should not be tightened, so that the eggs can swing slightly but do not touch the bottle. See the image below:

5. Throw the egg from a height of 3 meters. See the image below:

6. The eggs in the plastic bottle fell to the ground from the same height, but the eggs were intact. See the picture below: Jujube Pie.

Because the thin eggshell can withstand so much pressure because it is able to evenly distribute the pressure to all parts of the eggshell. Such a force system will cancel out the external forces in several directions, so as to achieve a balance, so that no matter how large the external force is, the egg will not break.

This principle, also known as the "thin shell principle", is a research content of elastic mechanics, which studies the mechanical properties of thin shells under various loads, such as deformation, internal force distribution, etc. Shells are also the object of study in structural mechanics.

The shell is an object surrounded by two surfaces, and the surface formed by the point at the same distance from the two surfaces is called the middle surface of the shell, and the length of the normal of the middle surface between the two surfaces is called the thickness of the shell.